← Commit history

Initial commit: component/me3118aspg

Ray ·2d60b3a286 ·
2 files changed +83
README.mdadded+49
@@ -0,0 +1,49 @@+# ME3118ASPG++**MICRONE** · DC-DC Converters · ESOP-8++ME3118ASPG from MICRONE, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PGND | power_in | Power ground. Return path for the internal low-side NMOS power switch. Must be connected to AGND (recommended star-tie at a single point to avoid PGND noise coupling into AGND). |+| 2 | VIN | power_in | Power supply input, 4.5 V to 18 V (absolute max 20 V). The device starts operating when VIN is above the UVLO threshold (typ. 4.0 V rising / 3.6 V falling) and EN is high. Bypass with a low-ESR ceramic input capacitor placed close to this pin and PGND. |+| 3 | AGND | power_in | Analog ground and reference potential for the internal controller. Must be connected to PGND (single-point tie when a ground plane is not used). |+| 4 | FB | input | Feedback input to the internal error amplifier. Set the output voltage with a resistor divider from VOUT to AGND: VO = 0.8 V × (1 + R1/R2). Internal reference VFB = 0.8 V (788-812 mV); input bias current is 200 nA max. |+| 5 | COMP | output | External loop compensation node - output of the internal transconductance error amplifier. Connect a series RC network from COMP to AGND to place the compensation pole/zero pair. Internal clamp limits COMP swing to approximately 0.4 V to 2.5 V. |+| 6 | EN | input | Enable input. Drive high (≥2 V) to enable the regulator; drive low (≤0.6 V) to shut it down (IOFF ≈ 1 µA typ.). Input hysteresis ~200 mV; input current ≤1 µA. Do not float - tie to VIN if enable control is not needed. |+| 7 | SS | output | Soft-start pin. An internal 5 µA current source charges an external capacitor from SS to AGND, ramping the internal reference during startup to limit inrush current and provide a monotonic output rise. Typical soft-start time is ~3 ms. |+| 8 | NC | unconnected | No internal connection. Leave floating or tie to ground for best PCB layout; do not use as a routing via. |+| 9 | LX | power_out | Switch node - exposed thermal pad on the ESOP-8. Internally the common drain of the high-side PMOS and low-side NMOS power switches; connect to the external filter inductor. Also serves as the primary thermal dissipation path - solder to a large copper area to lower θJA. Absolute max: −0.7 V to VIN+0.3 V DC (−5 V to 22 V for 20 ns transients). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MICRONE |+| Package | ESOP-8 |+| Category | PMIC |+| Pins | 9 |++## Ordering variants++- `ME3118ASPG`++## CAD (KiCad official)++- Symbol: `ME3118ASPG`+- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm`+- 3D model: ESOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MICRONE datasheet](docs/me3118aspg-datasheet.pdf) (None pp, sha256 `d7aa79dda3b2a9e4`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/me3118aspg-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "me3118aspg",+  "version": "0.1.0",+  "type": "component",+  "description": "MICRONE DC-DC Converters, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "pmic",+    "me3118aspg"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "me3118aspg.kicad_sym",+    "me3118aspg.kicad_mod",+    "me3118aspg.glb",+    "me3118aspg.step",+    "me3118aspg.lbr",+    "docs/hero.png",+    "docs/me3118aspg-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file