Generated by kicad-footprint-generator · KiCad file format 20260206
ME3104AM5G-N
MICRONE · DC-DC Converters · SOT-23-5
ME3104AM5G-N from MICRONE, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input. Logic-high enables the converter; logic-low forces shutdown mode. VENH >= 1.4V (up to VIN=6V); VENL <= 0.3V. Referenced 'H'=VIN, 'L'=GND. |
| 2 | GND | power_in | Device ground return. Connect to system ground plane with low-impedance path for input/output capacitor return currents. |
| 3 | SW | output | Switch node. Drain of the internal high-side PMOS and low-side NMOS synchronous switch. Connect the external inductor (typ. 2.2uH) between SW and the output. Absolute max -0.3V to 6V. RDSon(PMOS) ~0.110Ω, RDSon(NMOS) ~0.13Ω. |
| 4 | VIN | power_in | Input supply, 2.8V to 6V (abs max 6.0V). Bypass with a low-ESR ceramic capacitor (typ. 22uF) placed close to the pin. Powers internal high-side PMOS and control circuitry. |
| 5 | FB | input | Feedback input to the internal error amplifier. Regulated to VREF = 0.6V (±2%). Set VOUT with an external resistor divider from VOUT to FB to GND: VOUT = 0.6V × (1 + R1/R2). A small feed-forward capacitor (e.g. 10pF) across R1 improves transient response. VFB < 0.2V triggers short-circuit protection (500kHz operation). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
ME3104AM5G-N
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 2.8 | 6 | V | 4 | ||
| Feedback Voltage | VFB | 0.588 | 0.6 | 0.612 | V | 4 | |
| UVLO Voltage (VIN rising) | VUVLO | 2 | 2.2 | 2.4 | V | VIN rising | 4 |
| Output Voltage Line Regulation | LNR | 1 | %/V | VIN=2.8V to 6V IOUT=10mA | 4 | ||
| Output Voltage Load Regulation | LDR | 1 | %/V | 0mA<IOUT<800mA | 4 | ||
| DC Bias Current | Iq | 50 | 60 | μA | VFB= 1V | 4 | |
| Standby Current | ISBY | 0 | 1 | μA | VEN=0V | 4 | |
| Switching Frequency | FOSC | 1.2 | 1.5 | 1.8 | Mhz | VIN=5V,IOUT=300mA | 4 |
| Enable Input Voltage (H level) | VENH | 1.4 | 6 | V | VFB=0V, Applied voltage to VEN, VSW up to "H" level(*3) | 4 | |
| Enable Input Voltage (L level) | VENL | 0.3 | V | VFB=0V, Applied voltage to VEN, VSW down to "L" level(*3) | 4 | ||
| Soft-start Time | tss | 0.1 | 0.3 | 0.5 | mS | After "H" is fed to CE, the time when Lx pin oscillates | 4 |
| Input Voltage (absolute maximum) | VIN | -0.3 | 6 | V | 3 | ||
| SW Pin Voltage (absolute maximum) | VSW | -0.3 | 6 | V | 3 | ||
| EN Pin Voltage (absolute maximum) | VEN | -0.3 | 6 | V | 3 | ||
| FB Pin Voltage (absolute maximum) | VFB | -0.3 | 6 | V | 3 | ||
| Internal Power Dissipation (SOT23-5) | Pd | 600 | mW | SOT23-5 | 3 | ||
| Thermal resistance (junction to air) (SOT23-5) | θJA | 210 | ℃/W | Junction to air, SOT23-5 | 3 | ||
| Operating Ambient Temperature Range | TOpr | -40 | 70 | ℃ | 3 | ||
| Storage Temperature Range | Tstg | -55 | 150 | ℃ | 3 | ||
| Maximum junction temperature | TJ | -40 | 150 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
ME3104AM5G-N - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
me3104am5g-n-etched.step/me3104am5g-n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me3104am5g-n.step/me3104am5g-n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (10 pp, sha256
fbf9a8e13ddbc218, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).