main
Ray
me2808a45m3g: laser-etched CAD + chip hero (factory 2.0.0 backfill)
ce51ab5
ME2808A45M3G
MICRONE · Supervisor and Reset ICs · SOT-23
ME2808A45M3G from MICRONE, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | NMOS open-drain detector output (VDET). Normally high (active-low): pulls low when VIN falls below the 4.5 V detection threshold. Requires an external pull-up resistor. Output sink current typically 1.2 mA at VOUT=0.3 V. |
| 2 | GND | power_in | Ground / negative supply reference. |
| 3 | VIN | power_in | Supply / monitored input voltage. Operating range 1.5 V to 18 V (absolute max 18 V). The detector monitors this pin against the internal 4.5 V threshold. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
ME2808A45M3GME2808A45M3GXGME2808A45M3GM5GME2808A45M3GPGME2808A45M3GTG
CAD (KiCad official)
- Symbol:
ME2808A45M3G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
me2808a45m3g-etched.step/me2808a45m3g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me2808a45m3g.step/me2808a45m3g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (12 pp, sha256
373a5eda254f1153, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ME2808A45M3G
**MICRONE** · Supervisor and Reset ICs · SOT-23
ME2808A45M3G from MICRONE, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | NMOS open-drain detector output (VDET). Normally high (active-low): pulls low when VIN falls below the 4.5 V detection threshold. Requires an external pull-up resistor. Output sink current typically 1.2 mA at VOUT=0.3 V. |
| 2 | GND | power_in | Ground / negative supply reference. |
| 3 | VIN | power_in | Supply / monitored input voltage. Operating range 1.5 V to 18 V (absolute max 18 V). The detector monitors this pin against the internal 4.5 V threshold. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
Same part, different packaging or reel option.
- `ME2808A45M3G`
- `ME2808A45M3GXG`
- `ME2808A45M3GM5G`
- `ME2808A45M3GPG`
- `ME2808A45M3GTG`
## CAD (KiCad official)
- Symbol: `ME2808A45M3G`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `me2808a45m3g-etched.step` / `me2808a45m3g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `me2808a45m3g.step` / `me2808a45m3g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MICRONE datasheet](docs/me2808a45m3g-datasheet.pdf) (12 pp, sha256 `373a5eda254f1153`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/me2808a45m3g-datasheet.pdf)