main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs me2808a33m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers me2808a33m3g: viewers · Ray
me2808a33m3g-etched.fit.json me2808a33m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2808a33m3g-etched.glb me2808a33m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2808a33m3g-etched.step me2808a33m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2808a33m3g.glb Publish 0.1.0 · Ray
me2808a33m3g.kicad_mod Publish 0.1.0 · Ray
me2808a33m3g.kicad_sym Publish 0.1.0 · Ray
me2808a33m3g.lbr Publish 0.1.0 · Ray
me2808a33m3g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json me2808a33m3g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md me2808a33m3g: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

ME2808A33M3G

MICRONE · Supervisor and Reset ICs · SOT-23

ME2808A33M3G from MICRONE, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output Open-drain NMOS detector output (VDET). Normally high, pulled low (active-low) when VIN falls below the 3.3 V detection threshold. Requires an external pull-up resistor to the rail being monitored. Sink current typ. 1.2 mA at VOUT=0.3 V.
2 GND power_in Ground reference for the device.
3 VIN power_in Supply input and monitored voltage. Operating range 1.5-18 V (absolute max 18 V). The internal comparator detects when VIN crosses the 3.3 V threshold (rising-edge detection for the 'A' series).

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • ME2808A33M3G
  • ME2808A33M3GXG
  • ME2808A33M3GPG
  • ME2808A33M3GTG
  • ME2808A33M3GM5G

CAD (KiCad official)

  • Symbol: ME2808A33M3G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: me2808a33m3g-etched.step / me2808a33m3g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me2808a33m3g.step / me2808a33m3g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (12 pp, sha256 373a5eda254f1153, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF