component

ME2807A33M3G

Public Made by Adom

by adom

MICRONE Supervisor and Reset ICs, SOT-23. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpmicme2807a33m3g
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

ME2807A33M3G

MICRONE · Supervisor and Reset ICs · SOT-23

ME2807A33M3G from MICRONE, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output CMOS push-pull detector output. Goes low when VIN falls below V_DET (3.3V) for the A-variant (falling-edge detection). Output voltage swing is GND to VIN; sink capability ~0.5 mA typ at V_OUT = 0.2V, source capability ~0.5 mA typ.
2 GND power_in Ground / negative supply reference (VSS).
3 VIN power_in Supply / sensed input voltage. Operating range 1.5V to 18V (absolute max 18V). The detector monitors this pin and asserts VOUT when VIN crosses the fixed detection threshold (3.3V for the A33 option).

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • ME2807A33M3G
  • ME2807A33M3GX
  • ME2807A33M3GT

CAD (KiCad official)

  • Symbol: ME2807A33M3G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
me2807a33m3g.step 59 KB You want the bare part, or you mark your own boards.
me2807a33m3g-etched.step 2.4 MB You want the part with ME2807A33M3G already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 570 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (9 pp, sha256 9c2f883de6ec0bfe, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF