main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs me2807a30m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers me2807a30m3g: viewers · Ray
me2807a30m3g-etched.fit.json me2807a30m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2807a30m3g-etched.glb me2807a30m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2807a30m3g-etched.step me2807a30m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2807a30m3g.glb Publish 0.1.0 · Ray
me2807a30m3g.kicad_mod Publish 0.1.0 · Ray
me2807a30m3g.kicad_sym Publish 0.1.0 · Ray
me2807a30m3g.lbr Publish 0.1.0 · Ray
me2807a30m3g.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json me2807a30m3g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md me2807a30m3g: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

ME2807A30M3G

MICRONE · Supervisor and Reset ICs · SOT-23

ME2807A30M3G from MICRONE, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output CMOS push-pull detector output. Goes low when VIN falls below VDET (3.0V for -30 option) for the ME2807A; goes high on release above VDET(+). Output sink current typ 1 mA (VOUT=0.2V); source current typ -0.5 mA. Output voltage swing GND-0.3V to VIN+0.3V.
2 GND power_in Ground reference (VSS). Common return for supply and output.
3 VIN power_in Supply and sensed input voltage. Operating range 0.7V to 18V (absolute max 18V); this is the voltage being monitored against the internal VDET reference (3.0V for the -30 option). Typical operating current 1.8 µA at VIN=3.0V.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • ME2807A30M3G
  • ME2807A30M3GXG
  • ME2807A30M3GTG

CAD (KiCad official)

  • Symbol: ME2807A30M3G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: me2807a30m3g-etched.step / me2807a30m3g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me2807a30m3g.step / me2807a30m3g.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
me2807a30m3g.step 59 KB You want the bare part, or you mark your own boards.
me2807a30m3g-etched.step 2.4 MB You want the part with ME2807A30M3G already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 564 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (9 pp, sha256 9c2f883de6ec0bfe, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF