main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs me2212am6g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers me2212am6g: viewers · Ray
me2212am6g-etched.fit.json me2212am6g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2212am6g-etched.glb me2212am6g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2212am6g-etched.step me2212am6g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2212am6g.glb Publish 0.1.0 · Ray
me2212am6g.kicad_mod Publish 0.1.0 · Ray
me2212am6g.kicad_sym Publish 0.1.0 · Ray
me2212am6g.lbr Publish 0.1.0 · Ray
me2212am6g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json me2212am6g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md me2212am6g: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

ME2212AM6G

MICRONE · LED Drivers · SOT-23-6

ME2212AM6G from MICRONE, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LX output Switching node. Drain of the internal N-MOSFET power switch; connect to the boost inductor and Schottky diode. Absolute maximum voltage -0.3 V to 6 V (per absolute maximum table); the OVP loop clamps the boost output at 42-50 V (typ 46 V). RDS(on) typ 0.7 Ω.
2 GND power_in Device ground. Return path for the internal power switch and control circuitry.
3 FB input Feedback input to the internal error amplifier that regulates LED current. The device servos this pin to VFB = 200 mV (typ; 190-210 mV) across the external sense resistor Rs (e.g. 10 Ω sets ILED = 20 mA). Absolute maximum -0.3 V to 6 V.
4 EN input Chip enable / PWM dimming input. VIH ≥ 1.6 V enables the converter; VIL ≤ 0.9 V shuts it down (IShdn typ 3 µA). Accepts a PWM signal from 100 Hz to 200 kHz for LED brightness dimming.
5 VOUT power_out Boost output sense pin. Connect to the top of the WLED string / output capacitor. Internally monitored for over-voltage protection (typ 46 V, 42-50 V range) to protect the output capacitor when the LED string is open.
6 VIN power_in Supply input. Operating range 2.5 V to 5.5 V (typ 3.7 V). UVLO threshold 2.0-2.45 V (typ 2.2 V) with 0.1 V hysteresis. Supply current typ 0.8 mA (no external components). Absolute maximum -0.3 V to 6 V.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23-6
Category LED-drv
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • ME2212AM6G

CAD (KiCad official)

  • Symbol: ME2212AM6G
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: me2212am6g-etched.step / me2212am6g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me2212am6g.step / me2212am6g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (8 pp, sha256 4aeb8be2c309bb71, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF