← Commit history
page.json+7−4@@ -32,7 +32,7 @@ "number": "1", "name": "LX", "type": "output",- "description": "Switching node. Drain of the internal N-MOSFET power switch; connect to the boost inductor and Schottky diode. Absolute maximum voltage -0.3 V to 6 V (per absolute maximum table); the OVP loop clamps the boost output at 42-50 V (typ 46 V). RDS(on) typ 0.7 \u03a9."+ "description": "Switching node. Drain of the internal N-MOSFET power switch; connect to the boost inductor and Schottky diode. Absolute maximum voltage -0.3 V to 6 V (per absolute maximum table); the OVP loop clamps the boost output at 42-50 V (typ 46 V). RDS(on) typ 0.7 Ω." }, { "number": "2",@@ -44,13 +44,13 @@ "number": "3", "name": "FB", "type": "input",- "description": "Feedback input to the internal error amplifier that regulates LED current. The device servos this pin to VFB = 200 mV (typ; 190-210 mV) across the external sense resistor Rs (e.g. 10 \u03a9 sets ILED = 20 mA). Absolute maximum -0.3 V to 6 V."+ "description": "Feedback input to the internal error amplifier that regulates LED current. The device servos this pin to VFB = 200 mV (typ; 190-210 mV) across the external sense resistor Rs (e.g. 10 Ω sets ILED = 20 mA). Absolute maximum -0.3 V to 6 V." }, { "number": "4", "name": "EN", "type": "input",- "description": "Chip enable / PWM dimming input. VIH \u2265 1.6 V enables the converter; VIL \u2264 0.9 V shuts it down (IShdn typ 3 \u00b5A). Accepts a PWM signal from 100 Hz to 200 kHz for LED brightness dimming."+ "description": "Chip enable / PWM dimming input. VIH ≥ 1.6 V enables the converter; VIL ≤ 0.9 V shuts it down (IShdn typ 3 µA). Accepts a PWM signal from 100 Hz to 200 kHz for LED brightness dimming." }, { "number": "5",@@ -132,5 +132,8 @@ "docs/me2212am6g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }