main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs me2188a28m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers me2188a28m3g: viewers · Ray
me2188a28m3g-etched.fit.json me2188a28m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2188a28m3g-etched.glb me2188a28m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2188a28m3g-etched.step me2188a28m3g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
me2188a28m3g.glb Publish 0.1.0 · Ray
me2188a28m3g.kicad_mod Publish 0.1.0 · Ray
me2188a28m3g.kicad_sym Publish 0.1.0 · Ray
me2188a28m3g.lbr Publish 0.1.0 · Ray
me2188a28m3g.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json me2188a28m3g: specified limits as data (metadata.characteristics, 23 rows from the datasheet) · Ray
README.md me2188a28m3g: specified limits as data (metadata.characteristics, 23 rows from the datasheet) · Ray

ME2188A28M3G

MICRONE · DC-DC Converters · SOT-23

ME2188A28M3G from MICRONE, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Device ground. Must be tied solidly to the system ground plane; the internal zero reference tracks GND, so poor grounding causes it to shift with switching current and produces unstable operation.
2 LX power_out Switching node / energy-conversion pin. Connects to the external boost inductor (typ. 22 uH) which ties to VIN. Absolute max voltage -0.3 to 6 V; peak switch current ILXmax = 1000 mA (current limit typically 1000 mA, min 800 mA).
3 VOUT power_out Regulated boost output and internal feedback sense. Fixed 2.8 V for the A28 option (±2% accuracy). Also supplies the internal control circuitry; requires an output capacitor (typ. 100 uF, low-ESR/tantalum recommended, ≥40 uF). Abs max -0.3 to 6 V.

Key specifications

Parameter Value
Manufacturer MICRONE
Package SOT-23
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • ME2188A28M3G
  • ME2188A28M3GXG
  • ME2188A28M3GPG
  • ME2188A28M3GTG
  • ME2188A28M3GM5G

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
CE input voltage VCE -0.3 6 V 4
LX pin voltage LX -0.3 6 V 4
LX pin current ILXmax 1000 mA 4
VOUT pin voltage VOUT -0.3 6 V 4
Operating temperature range TOPR -40 125 ºC 4
Storage temperature range TSTG -50 150 ºC 4
Soldering temperature TL 260 ºC 4
Package power dissipation PD 300 mW SOT23-3/5 package 4
Startup voltage Vstart 0.7 0.9 1.1 V ILOAD=1mA, VIN:0→2V 4
Maximum input voltage Vinmax 0.9 5 V 4
Output voltage accuracy Vout -2 2 % 4
Line regulation ΔVout1 5 20 mV VIN=Vout×0.4~×0.6, IOUT=10mA 4
Load regulation ΔVout2 20 30 mV IOUT=0-100mA,VIN=2V 4
Quiescent current ISS 7.5 15 uA VOUT=VOUT+0.5 4
Shutdown current ISS0 0 0.5 uA VCE=0V 4
Current limit Ilimit 800 1000 1200 mA 4
No-load input current Iin0 10 15 uA VIN=1.5V, VOUT=2.2V 4
Efficiency 93 96 % 4
EN input high level 0.7 V 4
EN input low level 0.2 V 4
Hold voltage Vhold 0.5 V ILOAD=1mA, VIN:2→0V 4
Oscillation frequency 320 KHz 4
Oscillation signal duty cycle DCosc 74 % 4

CAD (KiCad official)

  • Symbol: ME2188A28M3G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: me2188a28m3g-etched.step / me2188a28m3g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); me2188a28m3g.step / me2188a28m3g.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
me2188a28m3g.step 59 KB You want the bare part, or you mark your own boards.
me2188a28m3g-etched.step 2.5 MB You want the part with ME2188A28M3G already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 584 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MICRONE datasheet (12 pp, sha256 aaef5a1b10071fe3, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF