component
ME2106F20P5G
Public Made by Adomby adom
MICRONE LED Drivers, SOT-89-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
ME2106F20P5G
MICRONE · LED Drivers · SOT-89-5
ME2106F20P5G from MICRONE, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback input that sets the constant output current through the external resistor Rc = VIFB / Iout, with a set feedback voltage of about 100 mV to 200 mV that makes the pin sensitive to ESD. |
| 2 | VOUT | power_in | Output voltage monitoring pin that also supplies the internal circuitry; the datasheet gives no separate VOUT absolute maximum, only the Vout+0.3 V limits on LX, CE and FB. |
| 3 | CE | input | Enable pin; the chip starts when VCE rises above about 0.6 V to 0.9 V and stops when it falls below about 0.3 V to 0.6 V, with an absolute maximum of 0.3 V to Vout+0.3 V. |
| 4 | LX | output | Switch pin connected to the inductor and Schottky diode, with a switch voltage limit of -0.3 V to Vout+0.3 V and a maximum output current of 1.5 A. |
| 5 | GND | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-89-5 |
| Category | LED Drivers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback voltage | VIFB | 180 | 200 | 220 | mV | IOUT=100mA | 4 |
| Startup voltage | Vstart | 0.8 | 0.9 | V | IOUT=1mA, VIN: 0→2V | 4 | |
| Maximum duty cycle | Maxdty | 77 | 79 | 82 | % | On(VLX"L")side | 4 |
| CE high input voltage | VCEH | 0.6 | 0.9 | V | VCE：0→2V (逐渐缓慢升高至芯片工作) | 4 | |
| CE low input voltage | VCEL | 0.3 | 0.6 | V | VCE：0→2V (逐渐缓慢下降至芯片不工作) | 4 | |
| Input voltage | VIN | -0.3 | 9 | V | 3 | ||
| Lx pin switch voltage | VLX | -0.3 | V | 3 | |||
| CE pin voltage | VCE | -0.3 | V | 3 | |||
| IFB pin input voltage | VIFB | -0.3 | V | 3 | |||
| Lx pin output current | ILX | 1.5 | A | 3 | |||
| Allowed max power dissipation, SOT-89-5 | Pd | 500 | mW | 3 | |||
| Maximum operating junction temperature | TMAX | 150 | ℃ | 3 | |||
| Operating temperature | TOPR | -20 | 85 | ℃ | 3 | ||
| Storage temperature | TSTG | -40 | 125 | ℃ | 3 | ||
| Soldering temperature and time | TSOLDERr | 260 | ℃ | 10 s | 3 | ||
| Input voltage range | 0.8 | V | 3 | ||||
| Inductance | 10 | 15 | 100 | µH | 3 | ||
| Input capacitance | 0 | µF | 3 | ||||
| Output capacitance | 47 | 100 | 220 | µF | footnote *: tantalum capacitor recommended to reduce switching ripple | 3 | |
| Operating ambient temperature | -20 | 85 | ℃ | 3 | |||
| Oscillation frequency | Fosc | 300 | kHz | VIFB=0 | 4 | ||
| Efficiency | η | 82 | % | IOUT=250mA | 4 |
CAD (KiCad official)
- Symbol:
ME2106F20P5G - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
me2106f20p5g-etched.step/me2106f20p5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me2106f20p5g.step/me2106f20p5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (16 pp, sha256
3ecc05adc04173ed, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ME2106F20P5G
**MICRONE** · LED Drivers · SOT-89-5
ME2106F20P5G from MICRONE, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback input that sets the constant output current through the external resistor Rc = VIFB / Iout, with a set feedback voltage of about 100 mV to 200 mV that makes the pin sensitive to ESD. |
| 2 | VOUT | power_in | Output voltage monitoring pin that also supplies the internal circuitry; the datasheet gives no separate VOUT absolute maximum, only the Vout+0.3 V limits on LX, CE and FB. |
| 3 | CE | input | Enable pin; the chip starts when VCE rises above about 0.6 V to 0.9 V and stops when it falls below about 0.3 V to 0.6 V, with an absolute maximum of 0.3 V to Vout+0.3 V. |
| 4 | LX | output | Switch pin connected to the inductor and Schottky diode, with a switch voltage limit of -0.3 V to Vout+0.3 V and a maximum output current of 1.5 A. |
| 5 | GND | power_in | Ground pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-89-5 |
| Category | LED Drivers |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback voltage | VIFB | 180 | 200 | 220 | mV | IOUT=100mA | 4 |
| Startup voltage | Vstart | | 0.8 | 0.9 | V | IOUT=1mA, VIN: 0→2V | 4 |
| Maximum duty cycle | Maxdty | 77 | 79 | 82 | % | On(VLX"L")side | 4 |
| CE high input voltage | VCEH | | 0.6 | 0.9 | V | VCE：0→2V (逐渐缓慢升高至芯片工作) | 4 |
| CE low input voltage | VCEL | | 0.3 | 0.6 | V | VCE：0→2V (逐渐缓慢下降至芯片不工作) | 4 |
| Input voltage | VIN | -0.3 | | 9 | V | | 3 |
| Lx pin switch voltage | VLX | -0.3 | | | V | | 3 |
| CE pin voltage | VCE | -0.3 | | | V | | 3 |
| IFB pin input voltage | VIFB | -0.3 | | | V | | 3 |
| Lx pin output current | ILX | | | 1.5 | A | | 3 |
| Allowed max power dissipation, SOT-89-5 | Pd | | | 500 | mW | | 3 |
| Maximum operating junction temperature | TMAX | | | 150 | ℃ | | 3 |
| Operating temperature | TOPR | -20 | | 85 | ℃ | | 3 |
| Storage temperature | TSTG | -40 | | 125 | ℃ | | 3 |
| Soldering temperature and time | TSOLDERr | | | 260 | ℃ | 10 s | 3 |
| Input voltage range | | 0.8 | | | V | | 3 |
| Inductance | | 10 | 15 | 100 | µH | | 3 |
| Input capacitance | | 0 | | | µF | | 3 |
| Output capacitance | | 47 | 100 | 220 | µF | footnote *: tantalum capacitor recommended to reduce switching ripple | 3 |
| Operating ambient temperature | | -20 | | 85 | ℃ | | 3 |
| Oscillation frequency | Fosc | | 300 | | kHz | VIFB=0 | 4 |
| Efficiency | η | | 82 | | % | IOUT=250mA | 4 |
## CAD (KiCad official)
- Symbol: `ME2106F20P5G`
- Footprint: `Package_TO_SOT_SMD:SOT-89-5`
- 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files: `me2106f20p5g-etched.step` / `me2106f20p5g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `me2106f20p5g.step` / `me2106f20p5g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MICRONE datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588902214760321024) (16 pp, sha256 `3ecc05adc04173ed`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/me2106f20p5g-datasheet.pdf)