component
ME2106F10P5G
Public Made by Adomby adom
MICRONE LED Drivers, SOT-89-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownME2106F10P5G
MICRONE · LED Drivers · SOT-89-5
ME2106F10P5G from MICRONE, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback pin; a sense resistor Rc sets the output current as Iout = VIFB/Rc, with VIFB = 100mV for the ME2106F10 version. |
| 2 | Vout | power_in | Output voltage monitor and IC internal power supply pin; absolute maximum for Lx, CE and FB pins is Vout+0.3V. |
| 3 | CE | input | Chip enable input; CE high threshold is 0.6V max and CE low threshold is 0.4V min, with absolute maximum of Vout+0.3V. |
| 4 | Lx | passive | Switch pin connected to the inductor and Schottky diode; Lx pin current is rated at 1.5A max and Lx leakage is 1µA max. |
| 5 | GND | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-89-5 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Duty Ratio | Maxdty | 77 | 79 | 82 | % | On(VLX"L") side | 5 |
| Startup Voltage | Vstart | 0.8 | 0.9 | V | IOUT=1mA, VIN: 0→2V | 5 | |
| Holding Voltage | Vhold | 0.6 | 0.7 | V | IOUT=1mA, VIN: 2→0V | 5 | |
| Lx Leakage Current | ILXleak | 1 | µA | VCE=VLX=VOUT=VIFB=3.3V | 5 | ||
| CE high input voltage | VCEH | 0.6 | V | VCE: 0→2V | 5 | ||
| CE low input voltage | VCEL | 0.4 | V | VCE: 2V→0 | 5 | ||
| Supply Current | IDD2 | 50 | µA | VCE=VIFB=VOUT=3.3V | 5 | ||
| Oscillation Frequency | Fosc | 300 | kHz | VIFB=0 | 5 | ||
| Efficiency | η | 82 | % | IOUT=250mA | 5 | ||
| Input Voltage | VIN | -0.3 | 6.5 | V | 4 | ||
| Lx Pin voltage | VLX | -0.3 | V | max is Vout+0.3 | 4 | ||
| CE Pin voltage | VCE | -0.3 | V | max is Vout+0.3 | 4 | ||
| IFB output voltage | VIFB | -0.3 | V | max is Vout+0.3 | 4 | ||
| Lx Pin current | ILX | 1.5 | A | 4 | |||
| Continuous Total Power Dissipation | Pd | 500 | mW | SOT-89-5 | 4 | ||
| Maximum Operating Ambient Temperature | Tmax | 150 | ℃ | 4 | |||
| Operating Ambient Temperature | TOpr | -20 | 85 | ℃ | 4 | ||
| Storage Temperature | Tstg | -40 | 125 | ℃ | 4 | ||
| Soldering temperature | Tsolder | 260 | ℃ | 10s | 4 | ||
| Input voltage | 0.8 | V | max printed as Vout | 4 | |||
| Inductance | 10 | 15 | 100 | µH | 4 | ||
| Input capacitance (printed 'Input inductance') | 0 | 22 | µF | recommended printed as ≥22 | 4 | ||
| Output capacitance (printed 'output inductance') | 47 | 100 | 220 | µF | 4 | ||
| Operating Ambient Temperature | -20 | 85 | ℃ | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Nanjing Micro | 17 |
CAD (KiCad official)
- Symbol:
ME2106F10P5G - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
me2106f10p5g-etched.step/me2106f10p5g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me2106f10p5g.step/me2106f10p5g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (17 pp, sha256
a6c0d965d3976179, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).