main
Ray
Publish 0.1.0
a1edcce
MDZ12-1
Shanghai Mingda Microelectronics · Audio Interface ICs · SOP-8
MDZ12-1 from Shanghai Mingda Microelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Drive signal output that drives the external buzzer circuit. |
| 2 | VDD | power_in | Power supply input, 1.5 V to 7 V operating (absolute max Vss+9.0 V), needs a low-ESR ceramic capacitor to GND and no series resistor from the supply. |
| 3 | F1 | input | Function select pin connected to VDD, GND or left floating (high-Z); may be left unconnected on MDZ12-1. |
| 4 | NC | unconnected | No connection, leave floating. |
| 5 | OSC0 | passive | Internal oscillator pin 1, requires an external resistor connected to the OSC0 pin. |
| 6 | OSC1 | passive | Internal oscillator pin 2, requires an external resistor connected to the OSC1 pin. |
| 7 | F2 | input | Function select pin connected to VDD, GND or left floating (high-Z); may be left unconnected on MDZ12-1. |
| 8 | GND | power_in | Ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOP-8 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作电压 | Vdd | 1.5 | 3.6 | 7 | V | 2 | |
| VDD 电压 | Vdd | -0.3 | 9 | V | Vss - 0.3 ~ Vss + 9.0 | 1 | |
| 允许功耗 SOP8 | Pd | 650 | mW | SOP8 package | 1 | ||
| 储存温度 | Tstorage | -40 | 125 | ℃ | 1 | ||
| 工作温度 | Tmin-max | -20 | 80 | ℃ | 1 | ||
| 静态功耗 | Iee | 10 | 15 | uA | F1、F2、OSC1 悬空,OSC0 接 GND | 2 | |
| 工作电流 | Idd | 70 | 104 | 140 | uA | F1、F2 之间接 270K | 2 |
| F1 吸取电流 | IF1H | 40 | 60 | 80 | uA | F1=VDD | 2 |
| F1 流出电流 | IF1L | -60 | -40 | -20 | uA | F1=GND | 2 |
| F2 吸取电流 | IF2 | 8 | 14 | 20 | uA | F2=VDD | 2 |
| F1 和 F2 高电平 | VFH | 1.2 | 1.5 | V | Io=5mA | 2 | |
| F1 和 F2 低电平 | VFL | 0.8 | 1 | V | Io=-5mA | 2 | |
| 输出频率波动 | Δf | -15 | 15 | % | VDD=3.6V,R=270K | 2 | |
| 输出高电平 | VoH | 3.2 | 3.5 | V | Io=5mA | 2 | |
| 输出低电平 | VoL | 0.1 | 0.4 | V | Io=-5mA | 2 | |
| 驱动电流 | Idir | 1.5 | mA | VDD=2V | 2 | ||
| 驱动电流 | Idir | 2.5 | mA | VDD=3.0V | 2 | ||
| 驱动电流 | Idir | 3 | mA | VDD=3.6V | 2 | ||
| 驱动电流 | Idir | 4.5 | mA | VDD=5V | 2 |
CAD (KiCad official)
- Symbol:
MDZ12-1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mdz12-1-etched.step/mdz12-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mdz12-1.step/mdz12-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (7 pp, sha256
effd3a8d7f3066cd, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MDZ12-1
**Shanghai Mingda Microelectronics** · Audio Interface ICs · SOP-8
MDZ12-1 from Shanghai Mingda Microelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Drive signal output that drives the external buzzer circuit. |
| 2 | VDD | power_in | Power supply input, 1.5 V to 7 V operating (absolute max Vss+9.0 V), needs a low-ESR ceramic capacitor to GND and no series resistor from the supply. |
| 3 | F1 | input | Function select pin connected to VDD, GND or left floating (high-Z); may be left unconnected on MDZ12-1. |
| 4 | NC | unconnected | No connection, leave floating. |
| 5 | OSC0 | passive | Internal oscillator pin 1, requires an external resistor connected to the OSC0 pin. |
| 6 | OSC1 | passive | Internal oscillator pin 2, requires an external resistor connected to the OSC1 pin. |
| 7 | F2 | input | Function select pin connected to VDD, GND or left floating (high-Z); may be left unconnected on MDZ12-1. |
| 8 | GND | power_in | Ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOP-8 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作电压 | Vdd | 1.5 | 3.6 | 7 | V | | 2 |
| VDD 电压 | Vdd | -0.3 | | 9 | V | Vss - 0.3 ~ Vss + 9.0 | 1 |
| 允许功耗 SOP8 | Pd | | | 650 | mW | SOP8 package | 1 |
| 储存温度 | Tstorage | -40 | | 125 | ℃ | | 1 |
| 工作温度 | Tmin-max | -20 | | 80 | ℃ | | 1 |
| 静态功耗 | Iee | | 10 | 15 | uA | F1、F2、OSC1 悬空,OSC0 接 GND | 2 |
| 工作电流 | Idd | 70 | 104 | 140 | uA | F1、F2 之间接 270K | 2 |
| F1 吸取电流 | IF1H | 40 | 60 | 80 | uA | F1=VDD | 2 |
| F1 流出电流 | IF1L | -60 | -40 | -20 | uA | F1=GND | 2 |
| F2 吸取电流 | IF2 | 8 | 14 | 20 | uA | F2=VDD | 2 |
| F1 和 F2 高电平 | VFH | 1.2 | 1.5 | | V | Io=5mA | 2 |
| F1 和 F2 低电平 | VFL | | 0.8 | 1 | V | Io=-5mA | 2 |
| 输出频率波动 | Δf | -15 | | 15 | % | VDD=3.6V,R=270K | 2 |
| 输出高电平 | VoH | 3.2 | 3.5 | | V | Io=5mA | 2 |
| 输出低电平 | VoL | | 0.1 | 0.4 | V | Io=-5mA | 2 |
| 驱动电流 | Idir | | 1.5 | | mA | VDD=2V | 2 |
| 驱动电流 | Idir | | 2.5 | | mA | VDD=3.0V | 2 |
| 驱动电流 | Idir | | 3 | | mA | VDD=3.6V | 2 |
| 驱动电流 | Idir | | 4.5 | | mA | VDD=5V | 2 |
## CAD (KiCad official)
- Symbol: `MDZ12-1`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `mdz12-1-etched.step` / `mdz12-1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mdz12-1.step` / `mdz12-1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/mdz12-1-datasheet.pdf) (7 pp, sha256 `effd3a8d7f3066cd`, retrieved 2026-11-07, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mdz12-1-datasheet.pdf)