main
Ray
md88r36: specified limits as data (metadata.characteristics, 20 rows from the datasheet)
48ed964
MD88R36
Shanghai Mingda Microelectronics · DC-DC Converters · SOT-23-5L
MD88R36 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Chip enable input. Drive high (V_CEH >= 0.9 V) to enable the converter; drive low (V_CEL <= 0.6 V, tie to GND) to place the device in shutdown (I_SHDN <= 0.5 uA typ 0.1 uA). Absolute max V_CE = Vss-0.3 to Vout+0.3 V. |
| 2 | VOUT | power_in | Regulated boost output-voltage sense pin; also supplies the internal control circuitry from the boosted rail. Nominal 3.6 V for MD88R36 with +/-2.5% accuracy. Absolute max Vss-0.3 V to Vss+12 V. Connect the output capacitor (>=100 uF tantalum recommended) and Schottky-diode cathode here. |
| 3 | NC | unconnected | No internal connection. Leave floating or tie to any convenient net; not electrically bonded inside the package. |
| 4 | VSS | power_in | Device ground / negative supply return (GND, 接地引脚). Reference for CE, VOUT, and LX voltages. |
| 5 | LX | output | Internal power-switch drain (boost switching node, 开关引脚). Connect the boost inductor (typ 27 uH, <0.5 ohm ESR) between VIN and LX and the Schottky diode (e.g. 1N5817) anode to LX. Absolute max V_LX = Vss-0.3 to Vss+12 V, I_LX <= 1000 mA; R_SWON ~0.4 ohm typ. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
MD88R36
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | △Vout | -2.5 | 2.5 | % | VIN=VOUT*0.6; IOUT=10mA; Ta=25℃ | 4 | |
| Input voltage | Vin | 10 | V | 4 | |||
| Startup voltage | Vstart | 0.75 | 0.9 | V | Iout=1mA, Vin: 0→2V (Fig.1) | 4 | |
| Hold voltage | Vhold | 0.7 | V | Iout=1mA, Vin: 2→0V (Fig.1) | 4 | ||
| Input current | Iin | 15 | 20 | uA | Iout=0mA (Fig.1) | 4 | |
| Quiescent power consumption | IDD | 4 | 7 | uA | VS = VOUT+0.5V (Fig.2) | 4 | |
| Shutdown current | ISHDN | 0.5 | uA | CE=GND | 4 | ||
| CE high-level voltage | VCEH | 0.9 | V | 4 | |||
| CE low-level voltage | VCEL | 0.6 | V | 4 | |||
| Power switch on-resistance | RSWON | 0.4 | 0.5 | Ω | 4 | ||
| Switch leakage current | ILEAK | 0.5 | uA | VS = VOUT+0.5V, VX=6V (Fig.3) | 4 | ||
| Oscillation frequency | FOSC | 300 | 350 | 400 | kHz | VS = VOUT*0.95 (Fig.3) | 4 |
| Duty cycle | DOSC | 65 | 75 | 85 | % | VS = VOUT*0.95 (Fig.3) | 4 |
| VOUT pin voltage (absolute maximum, referenced to VSS) | VOUT | -0.3 | 12 | V | Printed as VSS-0.3 to VSS+12 | 3 | |
| CE pin voltage (absolute maximum) | VCE | -0.3 | V | Printed as VSS-0.3 to VOUT+0.3; upper limit is VOUT+0.3 | 3 | ||
| LX pin voltage (absolute maximum, referenced to VSS) | VLX | -0.3 | 12 | V | Printed as VSS-0.3 to VSS+12 | 3 | |
| LX current | ILX | 1000 | mA | 3 | |||
| Allowable power dissipation, SOT-23-5 | PD | 0.25 | W | SOT-23-5 package | 3 | ||
| Operating temperature range | Tmin-max | -40 | 85 | ℃ | 3 | ||
| Storage temperature range | Tstorage | -40 | 125 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
MD88R36 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (13 pp, sha256
c7472abc6d9df737, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD88R36
**Shanghai Mingda Microelectronics** · DC-DC Converters · SOT-23-5L
MD88R36 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Chip enable input. Drive high (V_CEH >= 0.9 V) to enable the converter; drive low (V_CEL <= 0.6 V, tie to GND) to place the device in shutdown (I_SHDN <= 0.5 uA typ 0.1 uA). Absolute max V_CE = Vss-0.3 to Vout+0.3 V. |
| 2 | VOUT | power_in | Regulated boost output-voltage sense pin; also supplies the internal control circuitry from the boosted rail. Nominal 3.6 V for MD88R36 with +/-2.5% accuracy. Absolute max Vss-0.3 V to Vss+12 V. Connect the output capacitor (>=100 uF tantalum recommended) and Schottky-diode cathode here. |
| 3 | NC | unconnected | No internal connection. Leave floating or tie to any convenient net; not electrically bonded inside the package. |
| 4 | VSS | power_in | Device ground / negative supply return (GND, 接地引脚). Reference for CE, VOUT, and LX voltages. |
| 5 | LX | output | Internal power-switch drain (boost switching node, 开关引脚). Connect the boost inductor (typ 27 uH, <0.5 ohm ESR) between VIN and LX and the Schottky diode (e.g. 1N5817) anode to LX. Absolute max V_LX = Vss-0.3 to Vss+12 V, I_LX <= 1000 mA; R_SWON ~0.4 ohm typ. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `MD88R36`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | △Vout | -2.5 | | 2.5 | % | VIN=VOUT*0.6; IOUT=10mA; Ta=25℃ | 4 |
| Input voltage | Vin | | | 10 | V | | 4 |
| Startup voltage | Vstart | | 0.75 | 0.9 | V | Iout=1mA, Vin: 0→2V (Fig.1) | 4 |
| Hold voltage | Vhold | | | 0.7 | V | Iout=1mA, Vin: 2→0V (Fig.1) | 4 |
| Input current | Iin | | 15 | 20 | uA | Iout=0mA (Fig.1) | 4 |
| Quiescent power consumption | IDD | | 4 | 7 | uA | VS = VOUT+0.5V (Fig.2) | 4 |
| Shutdown current | ISHDN | | | 0.5 | uA | CE=GND | 4 |
| CE high-level voltage | VCEH | 0.9 | | | V | | 4 |
| CE low-level voltage | VCEL | | | 0.6 | V | | 4 |
| Power switch on-resistance | RSWON | | 0.4 | 0.5 | Ω | | 4 |
| Switch leakage current | ILEAK | | | 0.5 | uA | VS = VOUT+0.5V, VX=6V (Fig.3) | 4 |
| Oscillation frequency | FOSC | 300 | 350 | 400 | kHz | VS = VOUT*0.95 (Fig.3) | 4 |
| Duty cycle | DOSC | 65 | 75 | 85 | % | VS = VOUT*0.95 (Fig.3) | 4 |
| VOUT pin voltage (absolute maximum, referenced to VSS) | VOUT | -0.3 | | 12 | V | Printed as VSS-0.3 to VSS+12 | 3 |
| CE pin voltage (absolute maximum) | VCE | -0.3 | | | V | Printed as VSS-0.3 to VOUT+0.3; upper limit is VOUT+0.3 | 3 |
| LX pin voltage (absolute maximum, referenced to VSS) | VLX | -0.3 | | 12 | V | Printed as VSS-0.3 to VSS+12 | 3 |
| LX current | ILX | | | 1000 | mA | | 3 |
| Allowable power dissipation, SOT-23-5 | PD | | | 0.25 | W | SOT-23-5 package | 3 |
| Operating temperature range | Tmin-max | -40 | | 85 | ℃ | | 3 |
| Storage temperature range | Tstorage | -40 | | 125 | ℃ | | 3 |
## CAD (KiCad official)
- Symbol: `MD88R36`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L (KiCad packages3D, STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md88r36-datasheet.pdf) (13 pp, sha256 `c7472abc6d9df737`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md88r36-datasheet.pdf)