main
Ray
md88r30: specified limits as data (metadata.characteristics, 22 rows from the datasheet)
4e116f1
MD88R30
Shanghai Mingda Microelectronics · DC-DC Converters · SOT-23-5L
MD88R30 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Chip enable input. Drive high (VCEH ≥ 0.9V) to enable the regulator; drive low (VCEL ≤ 0.6V) to shut down (ISHDN ≤ 0.5µA). Absolute max: VSS-0.3 to VOUT+0.3V. |
| 2 | VOUT | power_out | Regulated boost output voltage sense pin; also supplies internal circuitry. Fixed 3.0V nominal ±2.5%. Absolute max: VSS-0.3 to VSS+12V. Connect the output capacitor (100µF tantalum recommended) here. |
| 3 | NC | unconnected | No connect. Leave floating or tie to ground. |
| 4 | VSS | power_in | Ground reference (GND) pin. All voltages referenced to this pin. |
| 5 | LX | power_out | Internal power switch (NMOS drain) node. Connect to the junction of the boost inductor (27µH typical) and the Schottky diode anode (e.g. 1N5817). RSWON ≈ 0.4Ω, ILX max 1000mA, VLX absolute max VSS-0.3 to VSS+12V. Switching frequency ~350kHz. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
Ordering variants
MD88R30MD88R30MD8830
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | △Vout | -2.5 | 2.5 | % | 4 | ||
| Input voltage | Vin | 10 | V | 4 | |||
| Start voltage | Vstart | 0.75 | 0.9 | V | Iout=1mA, Vin: 0→2V (Fig.1) | 4 | |
| Hold voltage | Vhold | 0.7 | V | Iout=1mA, Vin: 2→0V (Fig.1) | 4 | ||
| Input current | Iin | 15 | 20 | uA | Iout=0mA (Fig.1) | 4 | |
| Quiescent power consumption | IDD | 4 | 7 | uA | VS = VOUT+0.5V (Fig.2) | 4 | |
| Shutdown current | ISHDN | 0.5 | uA | CE=GND | 4 | ||
| CE high-level voltage | VCEH | 0.9 | V | 4 | |||
| CE low-level voltage | VCEL | 0.6 | V | 4 | |||
| Power switch on-resistance | RSWON | 0.4 | 0.5 | Ω | 4 | ||
| Switch leakage current | ILEAK | 0.5 | uA | VS = VOUT+0.5V, VX=6V (Fig.3) | 4 | ||
| Oscillation frequency | FOSC | 300 | 350 | 400 | kHz | VS = VOUT*0.95 (Fig.3) | 4 |
| Duty cycle | DOSC | 65 | 75 | 85 | % | VS = VOUT*0.95 (Fig.3) | 4 |
| Efficiency | η | 85 | % | 4 | |||
| VOUT pin voltage (absolute maximum) | VOUT | -0.3 | 12 | V | Referenced to VSS (printed VSS-0.3~VSS+12) | 3 | |
| CE pin voltage (absolute maximum) | VCE | -0.3 | V | Referenced to VSS for min; printed upper limit is VOUT+0.3 | 3 | ||
| LX pin voltage (absolute maximum) | VLX | -0.3 | 12 | V | Referenced to VSS (printed VSS-0.3~VSS+12) | 3 | |
| LX current (absolute maximum) | ILX | 1000 | mA | 3 | |||
| Allowable power dissipation, SOT-23-5 | PD | 0.25 | W | SOT-23-5 package | 3 | ||
| Operating temperature range | Tmin-max | -40 | 85 | ℃ | 3 | ||
| Storage temperature range | Tstorage | -40 | 125 | ℃ | 3 | ||
| Soldering temperature | 260 | ℃ | 10 s | 3 |
CAD (KiCad official)
- Symbol:
MD88R30 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
md88r30-etched.step/md88r30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md88r30.step/md88r30.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (None pp, sha256
c7472abc6d9df737, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD88R30
**Shanghai Mingda Microelectronics** · DC-DC Converters · SOT-23-5L
MD88R30 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Chip enable input. Drive high (VCEH ≥ 0.9V) to enable the regulator; drive low (VCEL ≤ 0.6V) to shut down (ISHDN ≤ 0.5µA). Absolute max: VSS-0.3 to VOUT+0.3V. |
| 2 | VOUT | power_out | Regulated boost output voltage sense pin; also supplies internal circuitry. Fixed 3.0V nominal ±2.5%. Absolute max: VSS-0.3 to VSS+12V. Connect the output capacitor (100µF tantalum recommended) here. |
| 3 | NC | unconnected | No connect. Leave floating or tie to ground. |
| 4 | VSS | power_in | Ground reference (GND) pin. All voltages referenced to this pin. |
| 5 | LX | power_out | Internal power switch (NMOS drain) node. Connect to the junction of the boost inductor (27µH typical) and the Schottky diode anode (e.g. 1N5817). RSWON ≈ 0.4Ω, ILX max 1000mA, VLX absolute max VSS-0.3 to VSS+12V. Switching frequency ~350kHz. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
- `MD88R30`
- `MD88R30MD8830`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | △Vout | -2.5 | | 2.5 | % | | 4 |
| Input voltage | Vin | | | 10 | V | | 4 |
| Start voltage | Vstart | | 0.75 | 0.9 | V | Iout=1mA, Vin: 0→2V (Fig.1) | 4 |
| Hold voltage | Vhold | | | 0.7 | V | Iout=1mA, Vin: 2→0V (Fig.1) | 4 |
| Input current | Iin | | 15 | 20 | uA | Iout=0mA (Fig.1) | 4 |
| Quiescent power consumption | IDD | | 4 | 7 | uA | VS = VOUT+0.5V (Fig.2) | 4 |
| Shutdown current | ISHDN | | | 0.5 | uA | CE=GND | 4 |
| CE high-level voltage | VCEH | 0.9 | | | V | | 4 |
| CE low-level voltage | VCEL | | | 0.6 | V | | 4 |
| Power switch on-resistance | RSWON | | 0.4 | 0.5 | Ω | | 4 |
| Switch leakage current | ILEAK | | | 0.5 | uA | VS = VOUT+0.5V, VX=6V (Fig.3) | 4 |
| Oscillation frequency | FOSC | 300 | 350 | 400 | kHz | VS = VOUT*0.95 (Fig.3) | 4 |
| Duty cycle | DOSC | 65 | 75 | 85 | % | VS = VOUT*0.95 (Fig.3) | 4 |
| Efficiency | η | | 85 | | % | | 4 |
| VOUT pin voltage (absolute maximum) | VOUT | -0.3 | | 12 | V | Referenced to VSS (printed VSS-0.3~VSS+12) | 3 |
| CE pin voltage (absolute maximum) | VCE | -0.3 | | | V | Referenced to VSS for min; printed upper limit is VOUT+0.3 | 3 |
| LX pin voltage (absolute maximum) | VLX | -0.3 | | 12 | V | Referenced to VSS (printed VSS-0.3~VSS+12) | 3 |
| LX current (absolute maximum) | ILX | | | 1000 | mA | | 3 |
| Allowable power dissipation, SOT-23-5 | PD | | | 0.25 | W | SOT-23-5 package | 3 |
| Operating temperature range | Tmin-max | -40 | | 85 | ℃ | | 3 |
| Storage temperature range | Tstorage | -40 | | 125 | ℃ | | 3 |
| Soldering temperature | | | | 260 | ℃ | 10 s | 3 |
## CAD (KiCad official)
- Symbol: `MD88R30`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files: `md88r30-etched.step` / `md88r30-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md88r30.step` / `md88r30.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md88r30-datasheet.pdf) (None pp, sha256 `c7472abc6d9df737`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md88r30-datasheet.pdf)