← Commit history

md85e50sf4: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·7a6f888540 · ·parent 6627f65
1 file changed +80−1
page.json+80−1
@@ -33,5 +33,84 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "MD85E50SF4",+    "manufacturer": "Shanghai Mingda Microelectronics",+    "package": "ESOP-8",+    "pin_count": 9,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "md85e50sf4.kicad_sym",+      "footprint": "md85e50sf4.kicad_mod",+      "model_3d": "md85e50sf4-etched.glb",+      "model_3d_plain": "md85e50sf4.glb",+      "model_3d_step": "md85e50sf4-etched.step",+      "model_3d_step_plain": "md85e50sf4.step",+      "lbr": "md85e50sf4.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated output voltage pin. Fixed 5.0V (±2%) with up to 300mA output current. Requires a low-ESR ceramic output capacitor of 2.2µF or greater placed close to the pin."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to GND for improved layout."+      },+      {+        "number": "3",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to GND for improved layout."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Enable pin (active high). Drive high (VENH ≥ 1.5V, up to 40V) to enable the regulator; drive low (VENL ≤ 0.6V) to place the device in shutdown with < 1uA ISHUT. Do not leave floating."+      },+      {+        "number": "5",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for the device. Connect to the system ground plane along with the exposed thermal pad."+      },+      {+        "number": "6",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to GND for improved layout."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to GND for improved layout."+      },+      {+        "number": "8",+        "name": "VIN",+        "type": "power_in",+        "description": "Power input pin. Operating range 2.2V to 40V (absolute maximum 45V). Requires a 2.2µF or larger input capacitor placed close to the pin to prevent oscillation."+      },+      {+        "number": "9",+        "name": "GND/Thermal Pad",+        "type": "power_in",+        "description": "Exposed thermal pad on the ESOP-8 underside. Electrically connected to the GND node and MUST be soldered to the PCB GND plane for proper thermal performance (RθJB = 80°C/W, PD = 1800mW)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}