component
MD8336
Public Made by Adomby adom
Shanghai Mingda Microelectronics Linear Voltage Regulators (LDO), SOT-89-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMD8336
Shanghai Mingda Microelectronics · Linear Voltage Regulators (LDO) · SOT-89-3
MD8336 from Shanghai Mingda Microelectronics, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output (3.6V option, up to 300mA, ±2% accuracy) driven by a P-channel pass MOSFET; needs COUT of 1.0uF or more and must not exceed VIN+0.3V. |
| 2 | VIN | power_in | Input supply, 2.2V to 40V operating (absolute maximum 45V), with CIN of 1.0uF or more placed close to the IC. |
| 3 | GND | power_in | Ground pin of the regulator, which draws about 1.5uA typical quiescent current at no load for 3.0V to 5.3V outputs. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-89-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT(S) | 0.98 | 1 | 1.02 | xVOUT(S) | VIN=VOUT(S)+2V, IOUT=10mA | 3 |
| Dropout Voltage | VDROP | 4 | 8 | mV | VOUT(S)=3.3V, IOUT=1mA | 3 | |
| Dropout Voltage | VDROP | 1300 | 1950 | mV | VOUT(S)=3.3V, IOUT=300mA | 3 | |
| Line Regulation | ΔVOUT/(ΔVIN·VOUT) | 0.01 | 0.02 | %/V | VOUT(S)+2V≤VIN≤40V, IOUT=1mA | 3 | |
| Load Regulation | ΔVOUT | 20 | 40 | mV | VIN=VOUT(S)+2V, 1mA≤IOUT≤300mA, VOUT(S)≤5.3V | 3 | |
| Temperature Stability | -50 | 50 | ppm/℃ | VIN=VOUT(S)+2V, IOUT=10mA, -40℃≤Ta≤125℃ | 3 | ||
| GND Current | IGND | 1 | 1.5 | 2.5 | uA | no load, 3.0≤VOUT(S)≤5.3V | 3 |
| GND Current | IGND | 460 | uA | IOUT=100mA | 3 | ||
| Input Voltage | VIN | 2.2 | 40 | V | 3 | ||
| Maximum Output Current | IOUTMAX | 300 | 350 | mA | 3 | ||
| Current Limit | ILIM | 350 | 550 | mA | VIN=VOUT(S)+2V, VOUT=0.95×VOUT(S) | 3 | |
| Short Circuit Current | ISHORT | 65 | mA | VIN=VOUT(S)+2.0V, VOUT=0V | 3 | ||
| Power Supply Rejection Ratio | PSRR | 74 | dB | f=10Hz, VOUT(S)=3.3V | 3 | ||
| Power Supply Rejection Ratio | PSRR | 63 | dB | f=100Hz, VOUT(S)=3.3V | 3 | ||
| Power Supply Rejection Ratio | PSRR | 42 | dB | f=1kHz, VOUT(S)=3.3V | 3 | ||
| Over Temperature Protection | OTP | 170 | ℃ | IOUT=1mA | 3 | ||
| Input Voltage (absolute maximum) | VIN | -0.3 | 45 | V | Ta=25℃ | 2 | |
| Output Voltage (absolute maximum) | VOUT | -0.3 | V | Vss-0.3 ~ VIN+0.3V | 2 | ||
| Power Dissipation | PD | 1000 | mW | SOT89-3 | 2 | ||
| Thermal Resistance | RθJB | 100 | ℃/W | SOT89-3, JEDEC 4layer (2s2p) PCB | 2 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 2 | ||
| Storage Temperature | Tstg | -40 | 125 | ℃ | 2 | ||
| ESD Protection | ESD | 1500 | V | HBM | 2 |
CAD (KiCad official)
- Symbol:
MD8336 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
md8336-etched.step/md8336-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md8336.step/md8336.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (10 pp, sha256
b90bf74c0495d786, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).