3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMD78U33
Shanghai Mingda Microelectronics · Linear Voltage Regulators (LDO) · SOT-89-3L
MD78U33 from Shanghai Mingda Microelectronics, in a SOT-89-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output terminal of the 3.3V LDO; VOUT must not exceed VIN+0.3V to avoid reverse-current damage, and an output capacitor of at least 2.2 µF (tantalum) or 10 µF (aluminum electrolytic) is required between VOUT and GND. |
| 2 | GND | power_in | Ground terminal; the output capacitor should be placed as close as possible to the VOUT and GND pins with low-impedance wiring. |
| 3 | VDD | power_in | Power input terminal; input voltage is rated up to 30 V, with the 3.3V output regulated for VIN from 4.3 V to 30 V, and an input capacitor of 1.0 µF or more is recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-89-3L |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 3.201 | 3.3 | 3.399 | V | VIN= 5.3V,IOUT=10mA | 2 |
| Output current | IOUT | 120 | 150 | mA | VIN= 5.3V | 2 | |
| Input-output voltage difference | Vdrop | 8 | mV | IOUT=1mA | 2 | ||
| Input-output voltage difference | Vdrop | 80 | mV | IOUT=10mA | 2 | ||
| Input stability | △VOUT/△VIN·VOUT | 0.05 | 0.2 | %/V | 4.3V≤VIN≤30V, IOUT=1mA | 2 | |
| Load regulation | △VOUT2 | 60 | 100 | mV | VIN=5.3V, 1.0mA≤IOUT≤120mA | 2 | |
| Output voltage temperature coefficient | △VOUT/△Ta·VOUT | -100 | 100 | Ppm/℃ | VIN=5.3V,IOUT=10mA, -40℃≤Ta≤85℃ | 2 | |
| Quiescent current | ISS | 35 | 45 | uA | VIN=30V 无负载 | 2 | |
| Input voltage | Vmax | 30 | V | 2 | |||
| Output short-circuit current | Ishort | 100 | mA | Vout=0V | 2 | ||
| Input voltage (absolute maximum) | VIN | 30 | V | 2 | |||
| Allowable power dissipation | PD | 500 | mW | SOT_89 | 2 | ||
| Operating ambient temperature range | Topr | -40 | 85 | ℃ | 2 | ||
| Storage ambient temperature range | Tstg | -40 | 125 | ℃ | 2 | ||
| Input capacitor | CIN | 1 | µF | 4 | |||
| Output capacitor (tantalum) | CL | 2.2 | µF | tantalum capacitor | 4 | ||
| Output capacitor (aluminum electrolytic) | CL | 10 | µF | aluminum electrolytic capacitor | 4 |
CAD (KiCad official)
- Symbol:
MD78U33 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3L (KiCad packages3D, STEP)
- 3D model files:
md78u33-etched.step/md78u33-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md78u33.step/md78u33.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (10 pp, sha256
ce26046787740645, retrieved 2026-10-29, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).