← Commit history
page.json+9−6@@ -38,13 +38,13 @@ "number": "2", "name": "EN", "type": "input",- "description": "Enable input, active-high. Drive \u22651.6V to enable the regulator; drive \u22640.4V to shut down (IQ drops to ~0.01\u00b5A and VOUT is discharged to GND through ~30\u03a9)."+ "description": "Enable input, active-high. Drive ≥1.6V to enable the regulator; drive ≤0.4V to shut down (IQ drops to ~0.01µA and VOUT is discharged to GND through ~30Ω)." }, { "number": "3", "name": "VIN", "type": "power_in",- "description": "Power supply input, 2V-6V. Decouple to GND with a 4.7\u00b5F (or larger) low-ESR X5R/X7R ceramic capacitor placed close to the pin. Pins 3 and 4 are tied together internally."+ "description": "Power supply input, 2V-6V. Decouple to GND with a 4.7µF (or larger) low-ESR X5R/X7R ceramic capacitor placed close to the pin. Pins 3 and 4 are tied together internally." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "VOUT", "type": "power_out",- "description": "Regulated output pin, up to 3A. Requires a 4.7\u00b5F (or larger) low-ESR ceramic output capacitor to GND for stability. Pins 5 and 6 are tied together internally."+ "description": "Regulated output pin, up to 3A. Requires a 4.7µF (or larger) low-ESR ceramic output capacitor to GND for stability. Pins 5 and 6 are tied together internally." }, { "number": "6",@@ -68,7 +68,7 @@ "number": "7", "name": "ADJ", "type": "input",- "description": "Adjust / feedback pin. Tie to GND to select the internal 5V fixed setting; connect to the tap of an external R1/R2 divider from VOUT to program VOUT = VREF \u00d7 (1 + R1/R2), VREF = 0.7V nominal. ADJ input current is \u226410nA, ADJ threshold ~0.1V."+ "description": "Adjust / feedback pin. Tie to GND to select the internal 5V fixed setting; connect to the tap of an external R1/R2 divider from VOUT to program VOUT = VREF × (1 + R1/R2), VREF = 0.7V nominal. ADJ input current is ≤10nA, ADJ threshold ~0.1V." }, { "number": "8",@@ -80,7 +80,7 @@ "number": "EP", "name": "GND", "type": "power_in",- "description": "Exposed thermal pad on the bottom of the ESOP-8 package. Must be soldered to the PCB ground plane both for the electrical ground return and for thermal dissipation (\u03b8JA \u2248 80 \u00b0C/W)."+ "description": "Exposed thermal pad on the bottom of the ESOP-8 package. Must be soldered to the PCB ground plane both for the electrical ground return and for thermal dissipation (θJA ≈ 80 °C/W)." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/md7673c50sf4-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }