3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMD75R30
Shanghai Mingda Microelectronics · Linear Voltage Regulators (LDO) · SOT-23-5
MD75R30 from Shanghai Mingda Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input pin; the datasheet gives an absolute maximum input voltage of 20 V and a maximum operating input voltage of 18 V (Vmax), with output regulation maintained up to 18 V. |
| 2 | GND | power_in | Ground pin, the common reference for the input and output. |
| 3 | CE | input | Active-high enable; the chip starts operating when CE is at least 1.0 V (VCEH) and stops when CE is at most 0.35 V (VCEL), with a pull-up current of 0.1 to 1 uA. |
| 4 | NC | unconnected | No internal connection; leave floating (not connected). |
| 5 | VOUT | power_out | Regulated output; the datasheet requires VOUT not to exceed VIN + 0.3 V, and VOUT must be kept at 2.2 uF or more (tantalum recommended) between VOUT and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 2.94 | 3 | 3.06 | V | VIN= 5V,IOUT=10mA | 2 |
| Output current (*1) | IOUT | 120 | 180 | mA | VIN= 4V | 2 | |
| Input-output voltage difference (*2) | Vdrop | 5 | 250 | mV | IOUT=1mA; IOUT=50 mA | 2 | |
| Input stability | △VOUT/△VIN·VOUT | 0.05 | 0.2 | %/V | 4V≤VIN≤18V, IOUT=1mA | 2 | |
| Load stability | △VOUT2 | 60 | 100 | mV | VIN=4V, 1.0mA≤IOUT≤120mA | 2 | |
| Output voltage temperature coefficient | △VOUT/△Ta·VOUT | -100 | 50 | 100 | Ppm/℃ | VIN=5V,IOUT=10mA, -40℃≤Ta≤85℃ | 2 |
| Consumption current | ISS | 1.2 | 5 | uA | VIN=18V 无负载 | 2 | |
| Quiescent current | ISS1 | 0.1 | 1 | uA | VIN=18V CE=GND 无负载 | 2 | |
| CE pull-up current | ICEH | 0.1 | 1 | uA | VIN=VCE=VOUT+1V | 2 | |
| CE input high voltage | VCEH | 1 | 1 | V | 2 | ||
| CE input low voltage | VCEL | 0 | 0.35 | V | 2 | ||
| Input voltage (Vmax) | Vmax | 18 | V | 2 | |||
| Output short-circuit current | Ishort | 160 | mA | Vout=0V | 2 | ||
| Input voltage (absolute maximum) | VIN | 20 | V | 2 | |||
| Allowable power dissipation | PD | 200 | mW | SOT_23_5L | 2 | ||
| Operating ambient temperature range | Topr | -40 | 85 | ℃ | 2 | ||
| Storage ambient temperature range | Tstg | -40 | 125 | ℃ | 2 | ||
| Input capacitor (CIN) | CIN | 1 | µF | 5 | |||
| Output capacitor (CL) | CL | 2.2 | µF | tantalum capacitor | 5 | ||
| Output capacitor (CL) | CL | 10 | µF | aluminum electrolytic capacitor | 5 | ||
| Output capacitor ESR | 0.5 | 5 | Ω | ESR of output capacitor for stable operation (approx. 0.5~5Ω) | 6 |
CAD (KiCad official)
- Symbol:
MD75R30 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
md75r30-etched.step/md75r30-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md75r30.step/md75r30.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (9 pp, sha256
f24bf1a24834dc74, retrieved 2026-10-30, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).