component
MD7530H
Public Made by Adomby adom
Shanghai Mingda Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 22d ago |
| viewers | 22d ago |
| md7530h-etched.glb | 22d ago |
| md7530h-etched.step | 22d ago |
| md7530h-hero.glb | 22d ago |
| md7530h-hero.overlay.json | 22d ago |
| md7530h.glb | 22d ago |
| md7530h.kicad_mod | 22d ago |
| md7530h.kicad_sym | 22d ago |
| md7530h.lbr | 22d ago |
| md7530h.step | 22d ago |
| package.json | 22d ago |
| page.json | 22d ago |
| README.md | 22d ago |
MD7530H
Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3
MD7530H from Shanghai Mingda Microelectronics, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground terminal (接地端) and reference for the regulator; the datasheet gives no further electrical limit for this pin. |
| 2 | VDD | power_in | Power input; the absolute maximum input voltage (VIN) is 32 V, the input voltage rating is 30 V, and output regulation is maintained up to 30 V. |
| 3 | VOUT | power_out | Regulated output; VOUT must not exceed VIN+0.3 V because the internal parasitic diode can cause reverse-current damage, and the output short-circuit current is limited to about 180 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 2.91 | 3 | 3.09 | V | VIN= 5V，IOUT=10mA | 3 |
| Input-output voltage differential | Vdrop | 5 | 10 | mV | IOUT=1mA | 3 | |
| Input-output voltage differential | Vdrop | 60 | 100 | mV | IOUT=10mA | 3 | |
| Input stability | ΔVOUT1/ΔVIN·VOUT | 0.05 | 0.2 | ％/V | 4V≤VIN≤30V IOUT=1mA | 3 | |
| Load stability | ΔVOUT2 | 60 | 100 | mV | VIN=5V 1.0mA≤IOUT≤100mA | 3 | |
| Output voltage temperature coefficient | ΔVOUT/ΔTa·VOUT | -100 | 50 | 100 | Ppm/℃ | VIN=5V，IOUT=10mA -40℃≤Ta≤85℃ | 3 |
| Quiescent current | ISS | 1.2 | 5 | uA | VIN=30V 无负载 | 3 | |
| Output current | IOUT | 120 | mA | VIN= 5V | 3 | ||
| Input voltage (Vmax) | Vmax | 30 | V | 3 | |||
| Output short-circuit current | Ishort | 180 | mA | Vout=0V | 3 | ||
| Overvoltage protection threshold | OVP | 37 | V | IOUT=1mA | 3 | ||
| Input voltage | VIN | 32 | V | 2 | |||
| Allowable power dissipation | PD | 500 | mW | SOT-89 | 2 | ||
| Operating ambient temperature range | Topr | -40 | 85 | ℃ | 2 | ||
| Storage ambient temperature range | Tstg | -40 | 125 | ℃ | 2 | ||
| Input capacitor | CIN | 1 | µF | 6 | |||
| Output capacitor (tantalum) | CL | 2.2 | µF | tantalum capacitor (推荐使用钽电容器) | 6 | ||
| Output capacitor (aluminum electrolytic) | CL | 10 | µF | aluminum electrolytic capacitor | 6 | ||
| Output capacitor ESR | ESR | 0.5 | 5 | Ω | CL output capacitor ESR range | 7 |
CAD (KiCad official)
- Symbol:
MD7530H - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
md7530h-etched.step/md7530h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md7530h.step/md7530h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (15 pp, sha256
33161ff733e26ee1, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).