main
History Download
Ray Publish 0.1.0 3907d86

MD7219E44QC3

Shanghai Mingda Microelectronics · Linear Voltage Regulators (LDO) · SOT-23-5L

MD7219E44QC3 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply pin; the datasheet gives an input voltage range of 2.2V to 18V with an absolute maximum of 20V.
2 GND power_in Ground reference pin, which must be shorted to VOUT in the short-circuit current test with impedance below 0.1 ohm.
3 EN input Enable input: a logic high of 1.6V to 18V turns the regulator on, and a logic low of 0V to 0.5V turns it off.
4 NC unconnected Not connected; no internal connection is stated for this pin.
5 VOUT power_out Regulated output from the P-channel pass transistor; the datasheet states VOUT must not exceed VIN+0.3V.

Key specifications

Parameter Value
Manufacturer Shanghai Mingda Microelectronics
Package SOT-23-5L
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN -0.3 20 V 3
Power Dissipation SOT23-5L PD 250 mW 3
Thermal Resistance SOT23-5L RθJA 180 ℃/W 3
Operating Ambient Temperature Topr -40 85 ℃ 3
Storage Temperature Tstg -40 125 ℃ 3
ESD Protection HBM ESD HBM 4000 V 3
Output Voltage Accuracy VOUT(S) -2 2 % 1
Input Voltage VIN 2.2 18 V 4
Line Regulation ΔVOUT/ΔVIN 0.01 0.02 %/V VOUT(S)+2V≤VIN≤18V IOUT =1mA 4
Load Regulation VOUT2 80 mV VIN=VOUT(S)+2V 1mA≤IOUT≤1A VOUT(S)≤5.0V 4
Temperature Stability ΔVOUT/ΔT -50 50 ppm/℃ VIN = VOUT(S)+2V,IOUT=1mA -40℃≤Ta≤125℃ 4
GND Current IGND 14 30 µA no load VOUT(S)≤5.0V 4
EN H Level Voltage VENH 1.6 18 V 4
EN L Level Voltage VENL 0 0.5 V 4
EN H Level Current IENH -0.1 0.1 µA VIN=18V, VEN=VIN 4
EN L Level Voltage (current) IENL -0.1 0.1 µA VIN=18V, VEN=0 4
Power Supply Rejection Ratio f=10Hz PSRR 72 dB f=10Hz, IOUT=10mA 4
Power Supply Rejection Ratio f=100Hz PSRR 80 dB f=100Hz, IOUT=10mA 4
Power Supply Rejection Ratio f=1kHz PSRR 75 dB f=1kHz, IOUT=10mA 4
Over Temperature Protection OTP 150 ℃ IOUT=1mA 4

CAD (KiCad official)

  • Symbol: MD7219E44QC3
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)
  • 3D model files: md7219e44qc3-etched.step / md7219e44qc3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); md7219e44qc3.step / md7219e44qc3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shanghai Mingda Microelectronics datasheet (15 pp, sha256 0052f2803aae3218, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF