component
MD7218D80UA2
Public Made by Adomby adom
Shanghai Mingda Microelectronics Linear Voltage Regulators (LDO), TO-252-2L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MD7218D80UA2
Shanghai Mingda Microelectronics · Linear Voltage Regulators (LDO) · TO-252-2L
MD7218D80UA2 from Shanghai Mingda Microelectronics, in a TO-252-2L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Regulator input supply, 2.2V to 18V operating (absolute maximum -0.3 to 15V), with the input capacitor (2.2uF typical) placed close to the IC. |
| 2 | VOUT | power_out | Regulated 8.0V output (MD7218D80) delivering up to 1A, with a 2.2uF output capacitor and the pin must not exceed VIN+0.3V. |
| 3 | GND | power_in | Ground pin of the regulator, shown as pin 3 (the tab on this 2-lead TO252 package). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | TO-252-2L |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT(S) | 0.98 | 1 | 1.02 | × VOUT(S) | VIN=VOUT(S)+2V, IOUT=1mA | 4 |
| Dropout Voltage | VDROP | 4 | 8 | mV | IOUT=1mA | 4 | |
| Dropout Voltage | VDROP | 650 | 900 | mV | IOUT=1A | 4 | |
| Line Regulation | 0.01 | 0.02 | %/V | VOUT(S)+2V≤VIN≤15V, IOUT=1mA | 4 | ||
| Temperature Stability | -50 | 50 | ppm/℃ | VIN=VOUT(S)+2V, IOUT=1mA, -40℃≤Ta≤125℃ | 4 | ||
| GND Current | IGND | 1.5 | 2.3 | 3 | µA | no load, VOUT(S)>5.0V | 4 |
| Input Voltage | VIN | 2.2 | 18 | V | 4 | ||
| Input Voltage | VIN | -0.3 | 15 | V | Ta=25℃ | 3 | |
| Storage Temperature | Tstg | -40 | 125 | ℃ | 3 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 3 | ||
| Maximum Output Current | IOUTMAX | 1 | A | 4 | |||
| Load Regulation | ΔVOUT2 | 90 | mV | VIN=VOUT(S)+2V, 1mA≤IOUT≤1A, VOUT(S)>5.0V | 4 | ||
| GND Current | IGND | 420 | µA | IOUT=100mA | 4 | ||
| Current Limit | ILIM | 1.5 | A | VIN=VOUT(S)+2V, VOUT=0.95×VOUT(S) | 4 | ||
| Power Supply Rejection Ratio | PSRR | 71 | dB | f=10Hz, IOUT=10mA | 4 | ||
| Power Supply Rejection Ratio | PSRR | 70 | dB | f=100Hz, IOUT=10mA | 4 | ||
| Power Supply Rejection Ratio | PSRR | 51 | dB | f=1kHz, IOUT=10mA | 4 | ||
| Short Circuit Current | ISHORT | 30 | mA | VIN=VOUT(S)+2.0V, VOUT=0V | 4 | ||
| Over Temperature Protection | OTP | 150 | ℃ | IOUT=1mA | 4 | ||
| Power Dissipation TO252-2L | PD | 1800 | mW | TO252-2L | 3 | ||
| Thermal Resistance TO252-2L | RθJB | 55 | ℃/W | TO252-2L, JEDEC 4layer (2s2p) PCB | 3 | ||
| ESD Protection HBM | ESD | 4000 | V | HBM | 3 |
CAD (KiCad official)
- Symbol:
MD7218D80UA2 - Footprint:
Package_TO_SOT_SMD:TO-252-2 - 3D model: TO-252-2L (KiCad packages3D, STEP)
- 3D model files:
md7218d80ua2-etched.step/md7218d80ua2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md7218d80ua2.step/md7218d80ua2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (15 pp, sha256
a1ab1acfaf9f63a7, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD7218D80UA2
**Shanghai Mingda Microelectronics** · Linear Voltage Regulators (LDO) · TO-252-2L
MD7218D80UA2 from Shanghai Mingda Microelectronics, in a TO-252-2L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Regulator input supply, 2.2V to 18V operating (absolute maximum -0.3 to 15V), with the input capacitor (2.2uF typical) placed close to the IC. |
| 2 | VOUT | power_out | Regulated 8.0V output (MD7218D80) delivering up to 1A, with a 2.2uF output capacitor and the pin must not exceed VIN+0.3V. |
| 3 | GND | power_in | Ground pin of the regulator, shown as pin 3 (the tab on this 2-lead TO252 package). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | TO-252-2L |
| Category | Power Management ICs |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT(S) | 0.98 | 1 | 1.02 | × VOUT(S) | VIN=VOUT(S)+2V, IOUT=1mA | 4 |
| Dropout Voltage | VDROP | | 4 | 8 | mV | IOUT=1mA | 4 |
| Dropout Voltage | VDROP | | 650 | 900 | mV | IOUT=1A | 4 |
| Line Regulation | | | 0.01 | 0.02 | %/V | VOUT(S)+2V≤VIN≤15V, IOUT=1mA | 4 |
| Temperature Stability | | -50 | | 50 | ppm/℃ | VIN=VOUT(S)+2V, IOUT=1mA, -40℃≤Ta≤125℃ | 4 |
| GND Current | IGND | 1.5 | 2.3 | 3 | µA | no load, VOUT(S)>5.0V | 4 |
| Input Voltage | VIN | 2.2 | | 18 | V | | 4 |
| Input Voltage | VIN | -0.3 | | 15 | V | Ta=25℃ | 3 |
| Storage Temperature | Tstg | -40 | | 125 | ℃ | | 3 |
| Operating Ambient Temperature | Topr | -40 | | 85 | ℃ | | 3 |
| Maximum Output Current | IOUTMAX | 1 | | | A | | 4 |
| Load Regulation | ΔVOUT2 | | 90 | | mV | VIN=VOUT(S)+2V, 1mA≤IOUT≤1A, VOUT(S)>5.0V | 4 |
| GND Current | IGND | | 420 | | µA | IOUT=100mA | 4 |
| Current Limit | ILIM | | 1.5 | | A | VIN=VOUT(S)+2V, VOUT=0.95×VOUT(S) | 4 |
| Power Supply Rejection Ratio | PSRR | | 71 | | dB | f=10Hz, IOUT=10mA | 4 |
| Power Supply Rejection Ratio | PSRR | | 70 | | dB | f=100Hz, IOUT=10mA | 4 |
| Power Supply Rejection Ratio | PSRR | | 51 | | dB | f=1kHz, IOUT=10mA | 4 |
| Short Circuit Current | ISHORT | | 30 | | mA | VIN=VOUT(S)+2.0V, VOUT=0V | 4 |
| Over Temperature Protection | OTP | | 150 | | ℃ | IOUT=1mA | 4 |
| Power Dissipation TO252-2L | PD | | | 1800 | mW | TO252-2L | 3 |
| Thermal Resistance TO252-2L | RθJB | | 55 | | ℃/W | TO252-2L, JEDEC 4layer (2s2p) PCB | 3 |
| ESD Protection HBM | ESD | | | 4000 | V | HBM | 3 |
## CAD (KiCad official)
- Symbol: `MD7218D80UA2`
- Footprint: `Package_TO_SOT_SMD:TO-252-2`
- 3D model: TO-252-2L (KiCad packages3D, STEP)
- 3D model files: `md7218d80ua2-etched.step` / `md7218d80ua2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md7218d80ua2.step` / `md7218d80ua2.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md7218d80ua2-datasheet.pdf) (15 pp, sha256 `a1ab1acfaf9f63a7`, retrieved 2026-10-26, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md7218d80ua2-datasheet.pdf)