component
MD7218A30PA1
Public Made by Adomby adom
Shanghai Mingda Microelectronics Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMD7218A30PA1
Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3L
MD7218A30PA1 from Shanghai Mingda Microelectronics, in a SOT-89-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; the GND current is 1.6 µA typical at no load for VOUT(S) ≤ 5.0 V (2 µA max). |
| 2 | VOUT | power_out | Regulated output pin delivering up to 1 A; VOUT must not exceed VIN + 0.3 V, and the absolute maximum rating is Vss − 0.3 V to VIN + 0.3 V. |
| 3 | VIN | power_in | Input supply pin; the absolute maximum input voltage is −0.3 V to 15 V, and the electrical table lists an input voltage range of 2.2 V to 18 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-89-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | -0.3 | 15 | V | 3 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 3 | ||
| Storage Temperature | Tstg | -40 | 125 | ℃ | 3 | ||
| ESD Protection HBM | ESD HBM | 4000 | V | 3 | |||
| Power Dissipation SOT89-3L | PD | 1000 | mW | 3 | |||
| Thermal Resistance SOT89-3L | RθJB | 100 | ℃/W | Mounted on JEDEC standard 4layer (2s2p) PCB test board | 3 | ||
| Output Voltage accuracy (multiplier of VOUT(S)) | VOUT(S) | 0.98 | 1.02 | x VOUT(S) | VIN=VOUT(S)+2V, IOUT=1mA | 4 | |
| Dropout Voltage | VDROP | 4 | 8 | mV | IOUT=1mA | 4 | |
| Dropout Voltage | VDROP | 650 | 900 | mV | IOUT=1A | 4 | |
| Line Regulation | ΔVOUT/ΔVIN | 0.01 | 0.02 | ％/V | VOUT(S)+2V≤VIN≤15V, IOUT=1mA | 4 | |
| Load Regulation (VOUT(S)≤5.0V) | VOUT2 | 80 | mV | VIN=VOUT(S)+2V, 1mA≤IOUT≤1A | 4 | ||
| Temperature Stability | ΔVOUT/ΔT | -50 | 50 | ppm/℃ | VIN=VOUT(S)+2V, IOUT=1mA, -40℃≤Ta≤125℃ | 4 | |
| GND Current (VOUT(S)≤5.0V) | IGND | 1 | 1.6 | 2 | µA | no load | 4 |
| GND Current | IGND | 420 | µA | IOUT=100mA | 4 | ||
| Input Voltage | VIN | 2.2 | 18 | V | 4 | ||
| Maximum Output Current | IOUTMAX | 1 | A | 4 | |||
| Current Limit | ILIM | 1.5 | A | VIN=VOUT(S)+2V, VOUT=0.95×VOUT(S) | 4 | ||
| Power Supply Rejection Ratio | PSRR | 71 | dB | f=10Hz, IOUT=10mA | 4 | ||
| Power Supply Rejection Ratio | PSRR | 70 | dB | f=100Hz, IOUT=10mA | 4 | ||
| Power Supply Rejection Ratio | PSRR | 51 | dB | f=1kHz, IOUT=10mA | 4 | ||
| Short Circuit Current | ISHORT | 30 | mA | VIN=VOUT(S)+2.0V, VOUT=0V | 4 | ||
| Over Temperature Protection | OTP | 150 | ℃ | IOUT=1mA | 4 |
CAD (KiCad official)
- Symbol:
MD7218A30PA1 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3L (KiCad packages3D, STEP)
- 3D model files:
md7218a30pa1-etched.step/md7218a30pa1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md7218a30pa1.step/md7218a30pa1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (15 pp, sha256
a1ab1acfaf9f63a7, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).