component
MD7050
Public Made by Adomby adom
Shanghai Mingda Microelectronics Monitors & Reset Circuits, SOT-89-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MD7050
Shanghai Mingda Microelectronics · Monitors & Reset Circuits · SOT-89-3
MD7050 from Shanghai Mingda Microelectronics, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Detector output (NMOS open drain, active low) that goes low when VDD falls below the 5.0V detect voltage, with sink current of 4mA min at VOUT=0.2V and a 10mA maximum output current. |
| 2 | VDD | power_in | Positive supply input with operating voltage of 1.5V to 15V and an absolute maximum of 18V. |
| 3 | GND | power_in | Ground (VSS) reference for the supply and output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-89-3 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Detectable Voltage Hi→Lo | VDET | 4.85 | 5 | 5.15 | V | TA=25℃ | 7 |
| Hysteresis Width | VHYS | 0.02 | 0.05 | 0.1 | %VDET | TA=25℃ | 7 |
| Operating Current | IDD | 1.2 | 3 | uA | VDD=6.0V, No load, TA=25℃ | 7 | |
| Operating Voltage | VDD | 1.5 | 15 | V | TA=25℃ | 7 | |
| Output Sink Current | IOL | 4 | 8 | mA | VDD=4.8V, VOUT=0.2V, TA=25℃ | 7 | |
| Temperature Coefficient | ΔVDET/ΔTA | 0.6 | mV/℃ | 0℃<Ta<70℃ (printed ±0.6) | 7 | ||
| Supply Voltage | -0.3 | 18 | V | 1 | |||
| Storage Temperature | -50 | 125 | ℃ | 1 | |||
| Operating Temperature | -40 | 85 | ℃ | 1 | |||
| Output Current | 10 | mA | 1 | ||||
| Power Consumption | 500 | mW | SOT89-3 | 1 | |||
| Detectable Voltage Tolerance | -3 | 3 | % | MD7050, 5.0V | 2 |
CAD (KiCad official)
- Symbol:
MD7050 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
md7050-etched.step/md7050-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md7050.step/md7050.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (17 pp, sha256
a73a565d183efa3d, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD7050
**Shanghai Mingda Microelectronics** · Monitors & Reset Circuits · SOT-89-3
MD7050 from Shanghai Mingda Microelectronics, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Detector output (NMOS open drain, active low) that goes low when VDD falls below the 5.0V detect voltage, with sink current of 4mA min at VOUT=0.2V and a 10mA maximum output current. |
| 2 | VDD | power_in | Positive supply input with operating voltage of 1.5V to 15V and an absolute maximum of 18V. |
| 3 | GND | power_in | Ground (VSS) reference for the supply and output. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-89-3 |
| Category | Power Management ICs |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Detectable Voltage Hi→Lo | VDET | 4.85 | 5 | 5.15 | V | TA=25℃ | 7 |
| Hysteresis Width | VHYS | 0.02 | 0.05 | 0.1 | %VDET | TA=25℃ | 7 |
| Operating Current | IDD | | 1.2 | 3 | uA | VDD=6.0V, No load, TA=25℃ | 7 |
| Operating Voltage | VDD | 1.5 | | 15 | V | TA=25℃ | 7 |
| Output Sink Current | IOL | 4 | 8 | | mA | VDD=4.8V, VOUT=0.2V, TA=25℃ | 7 |
| Temperature Coefficient | ΔVDET/ΔTA | | 0.6 | | mV/℃ | 0℃<Ta<70℃ (printed ±0.6) | 7 |
| Supply Voltage | | -0.3 | | 18 | V | | 1 |
| Storage Temperature | | -50 | | 125 | ℃ | | 1 |
| Operating Temperature | | -40 | | 85 | ℃ | | 1 |
| Output Current | | | | 10 | mA | | 1 |
| Power Consumption | | | | 500 | mW | SOT89-3 | 1 |
| Detectable Voltage Tolerance | | -3 | | 3 | % | MD7050, 5.0V | 2 |
## CAD (KiCad official)
- Symbol: `MD7050`
- Footprint: `Package_TO_SOT_SMD:SOT-89-3`
- 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files: `md7050-etched.step` / `md7050-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md7050.step` / `md7050.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md7050-datasheet.pdf) (17 pp, sha256 `a73a565d183efa3d`, retrieved 2026-10-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md7050-datasheet.pdf)