component
MD7033C
Public Made by Adomby adom
Shanghai Mingda Microelectronics Supervisor And Reset ICs, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MD7033C
Shanghai Mingda Microelectronics · Supervisor And Reset ICs · SOT-23-5L
MD7033C from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Detector output; for the MD7033C it is a CMOS output (normally high, active low) that goes low when VDD falls below the 3.3V detect voltage (±3%), with output current limited to 10mA max. |
| 2 | VDD | power_in | Positive supply and voltage-sense input; operating voltage 1.5V to 15V for the MD7033 and absolute maximum -0.3V to 18V. |
| 3 | GND | power_in | Ground (VSS) reference for the detector. |
| 4 | NC | unconnected | No connection pin on the SOT23-5 package. |
| 5 | NC | unconnected | No connection pin on the SOT23-5 package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Hi→Lo Detectable Voltage | VDET | 3.201 | 3.3 | 3.399 | V | 6 | |
| Hysteresis Width | VHYS | 0.02 | 0.05 | 0.07 | % | 6 | |
| Operating Current | IDD | 1.2 | 3 | uA | VDD 4.3, No load | 6 | |
| Operating Voltage | VDD | 1.5 | 15 | V | 6 | ||
| Output Sink Current | IOL | 2 | 4 | mA | VDD 3.1, VOUT=0.2V | 6 | |
| Temperature Coefficient | △VDET/△TA | -0.5 | 0.5 | mV/℃ | 0℃<Ta<70℃ | 6 | |
| Detectable voltage tolerance | -3 | 3 | % | MD7033 selection table | 2 | ||
| Supply Voltage | -0.3 | 18 | V | 1 | |||
| Output Voltage | -0.3 | V | VSS-0.3V to VDD+0.3V; min referenced to VSS, max referenced to VDD+0.3V | 1 | |||
| Output Current | 10 | mA | 1 | ||||
| Power Consumption | 250 | mW | SOT23-5 package | 1 | |||
| Storage Temperature | -50 | 125 | ℃ | 1 | |||
| Operating Temperature | -40 | 85 | ℃ | 1 |
CAD (KiCad official)
- Symbol:
MD7033C - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
md7033c-etched.step/md7033c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md7033c.step/md7033c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (17 pp, sha256
a73a565d183efa3d, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD7033C
**Shanghai Mingda Microelectronics** · Supervisor And Reset ICs · SOT-23-5L
MD7033C from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Detector output; for the MD7033C it is a CMOS output (normally high, active low) that goes low when VDD falls below the 3.3V detect voltage (±3%), with output current limited to 10mA max. |
| 2 | VDD | power_in | Positive supply and voltage-sense input; operating voltage 1.5V to 15V for the MD7033 and absolute maximum -0.3V to 18V. |
| 3 | GND | power_in | Ground (VSS) reference for the detector. |
| 4 | NC | unconnected | No connection pin on the SOT23-5 package. |
| 5 | NC | unconnected | No connection pin on the SOT23-5 package. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Hi→Lo Detectable Voltage | VDET | 3.201 | 3.3 | 3.399 | V | | 6 |
| Hysteresis Width | VHYS | 0.02 | 0.05 | 0.07 | % | | 6 |
| Operating Current | IDD | | 1.2 | 3 | uA | VDD 4.3, No load | 6 |
| Operating Voltage | VDD | 1.5 | | 15 | V | | 6 |
| Output Sink Current | IOL | 2 | 4 | | mA | VDD 3.1, VOUT=0.2V | 6 |
| Temperature Coefficient | △VDET/△TA | -0.5 | | 0.5 | mV/℃ | 0℃<Ta<70℃ | 6 |
| Detectable voltage tolerance | | -3 | | 3 | % | MD7033 selection table | 2 |
| Supply Voltage | | -0.3 | | 18 | V | | 1 |
| Output Voltage | | -0.3 | | | V | VSS-0.3V to VDD+0.3V; min referenced to VSS, max referenced to VDD+0.3V | 1 |
| Output Current | | | | 10 | mA | | 1 |
| Power Consumption | | | | 250 | mW | SOT23-5 package | 1 |
| Storage Temperature | | -50 | | 125 | ℃ | | 1 |
| Operating Temperature | | -40 | | 85 | ℃ | | 1 |
## CAD (KiCad official)
- Symbol: `MD7033C`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files: `md7033c-etched.step` / `md7033c-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md7033c.step` / `md7033c.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588918091598204928) (17 pp, sha256 `a73a565d183efa3d`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md7033c-datasheet.pdf)