main
Ray
md6127c27: laser-etched CAD + chip hero (factory 2.0.0 backfill)
3acee33
MD6127C27
Shanghai Mingda Microelectronics · Supervisor and Reset ICs · SOT-23-3L
MD6127C27 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DS | input | Delay-time select input. Tie low to select the internal ~200 ms release delay (Td1); tie high to bypass most of the counter chain for the short ~220 µs delay (Td2). Must be strapped to a fixed logic level (VSH ≥ 1.0 V or VSL ≤ 0.3 V at VDD=6.0 V); do not float. |
| 2 | VSS | power_in | Ground / negative supply reference for the IC. |
| 3 | NC | unconnected | No internal connection. Leave floating or tie to VSS. |
| 4 | VOUT | output | Voltage detection output. Goes low when VDD falls below -VDET (2.7 V nominal) and returns high after the internal delay (Td1 ≈ 200 ms) once VDD rises above +VDET. NMOS variants are open-drain and require an external pull-up (max sink 50 mA, VOL specified at IOUT= 3 mA for VDD≥2.4 V); CMOS variants are push-pull between VSS and VDD. |
| 5 | VDD | power_in | Supply input and monitored voltage. Operating range 1 V to 12 V (absolute max VDD-VSS = 15 V). This is the rail whose value is compared against the internal 2.7 V reference to generate the reset/detection signal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-3L |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
MD6127C27CMD6127C27N
CAD (KiCad official)
- Symbol:
MD6127C27 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
md6127c27-etched.step/md6127c27-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md6127c27.step/md6127c27.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (10 pp, sha256
1fab5f41f402e070, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD6127C27
**Shanghai Mingda Microelectronics** · Supervisor and Reset ICs · SOT-23-3L
MD6127C27 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DS | input | Delay-time select input. Tie low to select the internal ~200 ms release delay (Td1); tie high to bypass most of the counter chain for the short ~220 µs delay (Td2). Must be strapped to a fixed logic level (VSH ≥ 1.0 V or VSL ≤ 0.3 V at VDD=6.0 V); do not float. |
| 2 | VSS | power_in | Ground / negative supply reference for the IC. |
| 3 | NC | unconnected | No internal connection. Leave floating or tie to VSS. |
| 4 | VOUT | output | Voltage detection output. Goes low when VDD falls below -VDET (2.7 V nominal) and returns high after the internal delay (Td1 ≈ 200 ms) once VDD rises above +VDET. NMOS variants are open-drain and require an external pull-up (max sink 50 mA, VOL specified at IOUT= 3 mA for VDD≥2.4 V); CMOS variants are push-pull between VSS and VDD. |
| 5 | VDD | power_in | Supply input and monitored voltage. Operating range 1 V to 12 V (absolute max VDD-VSS = 15 V). This is the rail whose value is compared against the internal 2.7 V reference to generate the reset/detection signal. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-3L |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `MD6127C27C`
- `MD6127C27N`
## CAD (KiCad official)
- Symbol: `MD6127C27`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `md6127c27-etched.step` / `md6127c27-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md6127c27.step` / `md6127c27.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md6127c27-datasheet.pdf) (10 pp, sha256 `1fab5f41f402e070`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md6127c27-datasheet.pdf)