main
Ray
md6127c26: laser-etched CAD + chip hero (factory 2.0.0 backfill)
c97cb3c
MD6127C26
Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
MD6127C26 from Shanghai Mingda Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DS | input | Delay time ON/OFF switching control input. Must be tied to a fixed logic level: low selects the full internal delay tD1 (typ. 200 ms); high shortens the delay to (tD1 - tD2) since output is taken from a mid-point of the counter chain. VSH ≥ 1.0 V, VSL ≤ 0.3 V at VDD = 6.0 V. |
| 2 | VSS | power_in | Ground reference terminal. |
| 3 | NC | unconnected | No internal connection. Leave floating or tie to any convenient net. |
| 4 | VOUT | output | Voltage detection output. Asserts low when VDD falls below -VDET (2.6 V typ. for C26); after VDD rises above +VDET, the output is released high following the internal delay tD. In NMOS open-drain variants a pull-up resistor (e.g. 100 kΩ) to VDD is required; CMOS variant drives push-pull. Output current up to 50 mA absolute max. |
| 5 | VDD | power_in | Supply and sense input. Operating range 1 V to 12 V (15 V absolute max VDD-VSS). This is the voltage monitored against the internal 2.6 V detection threshold. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
MD6127C26CMD6127C26N
CAD (KiCad official)
- Symbol:
MD6127C26 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
md6127c26-etched.step/md6127c26-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md6127c26.step/md6127c26.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (8 pp, sha256
d357fb103061ea1a, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD6127C26
**Shanghai Mingda Microelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
MD6127C26 from Shanghai Mingda Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DS | input | Delay time ON/OFF switching control input. Must be tied to a fixed logic level: low selects the full internal delay tD1 (typ. 200 ms); high shortens the delay to (tD1 - tD2) since output is taken from a mid-point of the counter chain. VSH ≥ 1.0 V, VSL ≤ 0.3 V at VDD = 6.0 V. |
| 2 | VSS | power_in | Ground reference terminal. |
| 3 | NC | unconnected | No internal connection. Leave floating or tie to any convenient net. |
| 4 | VOUT | output | Voltage detection output. Asserts low when VDD falls below -VDET (2.6 V typ. for C26); after VDD rises above +VDET, the output is released high following the internal delay tD. In NMOS open-drain variants a pull-up resistor (e.g. 100 kΩ) to VDD is required; CMOS variant drives push-pull. Output current up to 50 mA absolute max. |
| 5 | VDD | power_in | Supply and sense input. Operating range 1 V to 12 V (15 V absolute max VDD-VSS). This is the voltage monitored against the internal 2.6 V detection threshold. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `MD6127C26C`
- `MD6127C26N`
## CAD (KiCad official)
- Symbol: `MD6127C26`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `md6127c26-etched.step` / `md6127c26-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md6127c26.step` / `md6127c26.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md6127c26-datasheet.pdf) (8 pp, sha256 `d357fb103061ea1a`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md6127c26-datasheet.pdf)