# MD57E33QC3

**Shanghai Mingda Microelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L

MD57E33QC3 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin, with an operating input voltage range of 2.2 V to 5.5 V and an absolute maximum VIN of -0.3 V to 6.0 V, requiring a 1 µF input capacitor. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Enable input with VENH minimum 0.85 V and VENL maximum 0.35 V; it is internally pulled low to GND through 1 MΩ, and a low level disables the device and activates the output auto-discharge. |
| 4 | NC | unconnected | Labelled NC on the pin configuration; the datasheet gives no function for this pin. |
| 5 | VOUT | power_out | Regulated output pin, with output voltage range 1.2 V to 4.5 V and maximum output current of 300 mA, requiring a 1 µF ceramic output capacitor placed within up to 10 cm of the device. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Tolerance | VOUT(S) | -2 |  | 2 | % | VIN=VOUT(S)+1.0V, IOUT=1mA, VOUT(S)≥2.0V | 4 |
| Input Voltage | VIN | 2.2 |  | 5.5 | V |  | 4 |
| EN 'H' Level Voltage | VENH | 0.85 |  | 5.5 | V |  | 4 |
| EN 'L' Level Voltage | VENL | 0 |  | 0.35 | V |  | 4 |
| EN 'H' Level Current | IENH | -0.1 |  | 0.1 | µA | VIN=5.5V, VEN=VIN | 4 |
| EN 'L' Level Current | IENL | -0.1 |  | 0.1 | µA | VIN=5.5V, VEN=0 | 4 |
| Dropout Voltage | VDROP |  |  | 120 | mV | VEN=VIN, VOUT≥3V, IOUT=300mA | 4 |
| Line Regulation |  |  | 0.02 | 0.1 | %/V | VOUT(S)+1.0V≤VIN=VEN≤5.5V, IOUT=10mA | 4 |
| Line Transient | VOUT_Line | -1 |  |  | mV | VIN=VOUT+1V to VOUT+2V in 30us | 4 |
| Line Transient | VOUT_Line |  |  | 1 | mV | VIN=VOUT+2V to VOUT+1V in 30us | 4 |
| Load Regulation | VOUT2 |  | 10 | 20 | mV | VIN=VEN=VOUT(S)+1.0V, 1mA≤IOUT≤300mA | 4 |
| Load Transient | VOUT_Load | -40 |  |  | mV | IOUT=1mA to 300mA in 10µs | 4 |
| Load Transient | VOUT_Load |  |  | 40 | mV | IOUT=300mA to 1mA in 10µs | 4 |
| Temperature Stability |  | -100 |  | 100 | ppm/℃ | VIN=VEN=VOUT(S)+1.0V, IOUT=1mA, -40℃≤Ta≤125℃ | 4 |
| GND Current (no load) | IGND |  | 20 | 30 | µA | no load (VEN=VIN) | 4 |
| GND Current (IOUT=300mA) | IGND |  |  | 470 | µA | IOUT=300mA (VEN=VIN) | 4 |
| Shutdown Current | ISHUT |  | 0.01 | 0.1 | µA | VIN=5.5V, VEN=0 | 4 |
| Maximum Output Current | IOUTMAX | 250 |  | 300 | mA |  | 4 |
| Output Overshoot on Start-Up | VOUT_Start-up |  |  | 5 | % | Stated as a percentage of VOUT(S) | 4 |
| Start-Up Time | TSTART |  | 80 | 150 | µs | From VEN>VENH to VOUT=95% of VOUT | 4 |
| Absolute Max Input Voltage | VIN | -0.3 |  | 6 | V |  | 3 |
| Absolute Max Output Voltage | VOUT | -0.3 |  |  | V | Upper limit printed as VIN+0.3V | 3 |
| Power Dissipation | PD |  |  | 250 | mW | SOT23-5L | 3 |
| ESD Protection | ESD HBM |  |  | 6000 | V | HBM | 3 |
| Storage Temperature | Tstg | -40 |  | 125 | ℃ |  | 3 |
| Thermal Resistance Junction-to-Board | RθJB |  | 180 |  | ℃/W | SOT23-5L, mounted on JEDEC standard 4-layer (2s2p) PCB | 3 |
| Operating Ambient Temperature | Topr | -40 |  | 85 | ℃ |  | 3 |
| Operating Junction Temperature | TJ | -40 |  | 125 | ℃ |  | 1 |
| Input Capacitor (CIN) | CIN | 1 |  |  | µF | Notes on use | 3 |
| Output Capacitor Range | COUT | 1 |  | 10 | µF |  | 10 |
| Input/Output Capacitor ESR Range | ESR | 5 |  | 500 | mΩ |  | 10 |
| Current Limit | ILIM |  | 500 |  | mA | VIN=VEN=VOUT(S)+1.0V, VOUT = 0.95×VOUT(S) | 4 |
| Output Auto Discharge Resistance | RDCHG |  | 240 |  | Ω | VEN=0, VOUT=VOUT(S) | 4 |
| Power Supply Rejection Ratio | PSRR |  | 94 |  | dB | f=1kHz, IOUT=20mA | 4 |
| Power Supply Rejection Ratio | PSRR |  | 72 |  | dB | f=10kHz, IOUT=20mA | 4 |
| Power Supply Rejection Ratio | PSRR |  | 77 |  | dB | f=100kHz, IOUT=20mA | 4 |
| Power Supply Rejection Ratio | PSRR |  | 53 |  | dB | f=1MHz, IOUT=20mA | 4 |
| Output Noise Voltage | eN |  | 20 |  | µVRMS | IOUT=20mA | 4 |
| Over Temperature Protection | OTP |  | 155 |  | ℃ | IOUT=1mA | 4 |

## CAD (KiCad official)

- Symbol: `MD57E33QC3`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files: `md57e33qc3-etched.step` / `md57e33qc3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md57e33qc3.step` / `md57e33qc3.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588917860609765377) (12 pp, sha256 `42680ba6ee0683b4`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/md57e33qc3-datasheet.pdf)