main
Ray
md53r50: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero
b5f847d
MD53R50
Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
MD53R50 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply. Operating range up to 10 V; absolute maximum 12 V. Bypass to GND with CIN ≥ 1.0 µF (10 µF typical in application circuit). |
| 2 | GND | power_in | Ground / VSS reference for the regulator. All bypass capacitors return here. |
| 3 | EN | input | Enable / ON-OFF control input (active high). VENH ≥ 1.0 V enables the regulator; VENL ≤ 0.35 V shuts it down (ISHUT ≈ 0.1 µA typ). Pin is neither pulled up nor pulled down internally, so it must not be left floating - tie to VIN for always-on operation. Do not drive above VIN+0.3 V. |
| 4 | NC | unconnected | No connection. Leave floating or tie to a convenient net; not internally bonded. |
| 5 | VOUT | power_out | Regulated 5.0 V ±2% output, up to 500 mA typical. Requires COUT ≥ 2.2 µF (tantalum) or ≥ 10 µF (aluminum electrolytic) with ESR 0.5-5 Ω for stability. Short-circuit protected at ~50 mA typical. Do not exceed VIN+0.3 V on this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
MD53R50 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
md53r50-etched.step/md53r50-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md53r50.step/md53r50.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (13 pp, sha256
264969efedda2a5d, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD53R50
**Shanghai Mingda Microelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
MD53R50 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated input supply. Operating range up to 10 V; absolute maximum 12 V. Bypass to GND with CIN ≥ 1.0 µF (10 µF typical in application circuit). |
| 2 | GND | power_in | Ground / VSS reference for the regulator. All bypass capacitors return here. |
| 3 | EN | input | Enable / ON-OFF control input (active high). VENH ≥ 1.0 V enables the regulator; VENL ≤ 0.35 V shuts it down (ISHUT ≈ 0.1 µA typ). Pin is neither pulled up nor pulled down internally, so it must not be left floating - tie to VIN for always-on operation. Do not drive above VIN+0.3 V. |
| 4 | NC | unconnected | No connection. Leave floating or tie to a convenient net; not internally bonded. |
| 5 | VOUT | power_out | Regulated 5.0 V ±2% output, up to 500 mA typical. Requires COUT ≥ 2.2 µF (tantalum) or ≥ 10 µF (aluminum electrolytic) with ESR 0.5-5 Ω for stability. Short-circuit protected at ~50 mA typical. Do not exceed VIN+0.3 V on this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
## CAD (KiCad official)
- Symbol: `MD53R50`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files: `md53r50-etched.step` / `md53r50-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md53r50.step` / `md53r50.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md53r50-datasheet.pdf) (13 pp, sha256 `264969efedda2a5d`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md53r50-datasheet.pdf)