main
Ray
md5325-1: specified limits as data (metadata.characteristics, 19 rows from the datasheet)
6aeb82f
MD5325-1
Shanghai Mingda Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3L
MD5325-1 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground / VSS reference pin. Common return for the LDO's internal reference, error amplifier, and pass transistor. Tie directly to the system ground plane via a single-point connection close to the input and output bypass capacitors. |
| 2 | VIN | power_in | Regulator input supply. Accepts up to 10 V continuous (12 V absolute max). Bypass to GND with CIN ≥ 1.0 µF placed as close to the pin as possible for stability and transient response. |
| 3 | VOUT | power_out | Regulated 2.5 V output (±2%), rated 500 mA typical with 1 A current limit. Requires an output capacitor CL ≥ 2.2 µF (tantalum) or ≥ 10 µF (aluminum electrolytic) between VOUT and GND for loop stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-3L |
| Category | PMIC |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | VOUT | -2 | 2 | % | 2 | ||
| Output voltage (factor of VOUT(S)) | VOUT(S) | 0.98 | 1.02 | × VOUT(S) | VIN=VOUT+1V, IOUT=50mA | 3 | |
| Output current | IOUT | 500 | mA | VIN=VOUT+1V | 3 | ||
| Input-output voltage difference (dropout) | VDROP | 650 | 1150 | mV | IOUT=500mA, VOUT=2.5V | 3 | |
| Input stability | ΔVOUT1/(ΔVIN·VOUT(S)) | 0.05 | 0.2 | %/V | VOUT+1V≤VIN≤10V, IOUT=10mA | 3 | |
| Load regulation | ΔVOUT2 | 20 | 40 | mV | VIN=VOUT+1V, 1mA≤IOUT≤100mA | 3 | |
| Output voltage temperature coefficient | ΔVOUT/(ΔTa·VOUT(S)) | -100 | 50 | 100 | ppm/℃ | VIN=VOUT+1V, IOUT=1mA, -40℃≤Ta≤125℃ | 3 |
| Quiescent current | ISS1 | 1.2 | 2.5 | uA | VIN=10V, no load | 3 | |
| Input voltage | VIN | 10 | V | 3 | |||
| Current limit | ILIM | 1 | A | VIN=VOUT+1V | 3 | ||
| Power supply rejection ratio (100Hz) | PSRR | 44 | dB | f=100Hz, IOUT=10mA | 3 | ||
| Power supply rejection ratio (1kHz) | PSRR | 23 | dB | f=1kHz, IOUT=10mA | 3 | ||
| Input voltage (absolute maximum) | VIN | 12 | V | Ta=25℃ unless otherwise noted | 2 | ||
| Power dissipation (SOT-23) | PD | 250 | mW | SOT-23, Ta=25℃ unless otherwise noted | 2 | ||
| Thermal resistance junction-to-board (SOT-23) | RθJB | 200 | ℃/W | Mounted on JEDEC standard 4-layer (2s2p) PCB test board (footnote 1) | 2 | ||
| Storage ambient temperature | TSTG | -40 | 125 | ℃ | 2 | ||
| Operating ambient temperature | TOPR | -40 | 85 | ℃ | 2 | ||
| Input capacitor (CIN) | CIN | 1 | µF | 8 | |||
| Output capacitor (COUT) | COUT | 2.2 | µF | Tantalum capacitor; 10.0 µF or more if aluminum electrolytic | 8 |
CAD (KiCad official)
- Symbol:
MD5325-1 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
md5325-1-etched.step/md5325-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md5325-1.step/md5325-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (12 pp, sha256
248fdd6b5737ce18, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD5325-1
**Shanghai Mingda Microelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3L
MD5325-1 from Shanghai Mingda Microelectronics, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground / VSS reference pin. Common return for the LDO's internal reference, error amplifier, and pass transistor. Tie directly to the system ground plane via a single-point connection close to the input and output bypass capacitors. |
| 2 | VIN | power_in | Regulator input supply. Accepts up to 10 V continuous (12 V absolute max). Bypass to GND with CIN ≥ 1.0 µF placed as close to the pin as possible for stability and transient response. |
| 3 | VOUT | power_out | Regulated 2.5 V output (±2%), rated 500 mA typical with 1 A current limit. Requires an output capacitor CL ≥ 2.2 µF (tantalum) or ≥ 10 µF (aluminum electrolytic) between VOUT and GND for loop stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-23-3L |
| Category | PMIC |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | VOUT | -2 | | 2 | % | | 2 |
| Output voltage (factor of VOUT(S)) | VOUT(S) | 0.98 | | 1.02 | × VOUT(S) | VIN=VOUT+1V, IOUT=50mA | 3 |
| Output current | IOUT | 500 | | | mA | VIN=VOUT+1V | 3 |
| Input-output voltage difference (dropout) | VDROP | | 650 | 1150 | mV | IOUT=500mA, VOUT=2.5V | 3 |
| Input stability | ΔVOUT1/(ΔVIN·VOUT(S)) | | 0.05 | 0.2 | %/V | VOUT+1V≤VIN≤10V, IOUT=10mA | 3 |
| Load regulation | ΔVOUT2 | | 20 | 40 | mV | VIN=VOUT+1V, 1mA≤IOUT≤100mA | 3 |
| Output voltage temperature coefficient | ΔVOUT/(ΔTa·VOUT(S)) | -100 | 50 | 100 | ppm/℃ | VIN=VOUT+1V, IOUT=1mA, -40℃≤Ta≤125℃ | 3 |
| Quiescent current | ISS1 | | 1.2 | 2.5 | uA | VIN=10V, no load | 3 |
| Input voltage | VIN | | | 10 | V | | 3 |
| Current limit | ILIM | | 1 | | A | VIN=VOUT+1V | 3 |
| Power supply rejection ratio (100Hz) | PSRR | | 44 | | dB | f=100Hz, IOUT=10mA | 3 |
| Power supply rejection ratio (1kHz) | PSRR | | 23 | | dB | f=1kHz, IOUT=10mA | 3 |
| Input voltage (absolute maximum) | VIN | | | 12 | V | Ta=25℃ unless otherwise noted | 2 |
| Power dissipation (SOT-23) | PD | | | 250 | mW | SOT-23, Ta=25℃ unless otherwise noted | 2 |
| Thermal resistance junction-to-board (SOT-23) | RθJB | | | 200 | ℃/W | Mounted on JEDEC standard 4-layer (2s2p) PCB test board (footnote 1) | 2 |
| Storage ambient temperature | TSTG | -40 | | 125 | ℃ | | 2 |
| Operating ambient temperature | TOPR | -40 | | 85 | ℃ | | 2 |
| Input capacitor (CIN) | CIN | 1 | | | µF | | 8 |
| Output capacitor (COUT) | COUT | 2.2 | | | µF | Tantalum capacitor; 10.0 µF or more if aluminum electrolytic | 8 |
## CAD (KiCad official)
- Symbol: `MD5325-1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `md5325-1-etched.step` / `md5325-1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md5325-1.step` / `md5325-1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shanghai Mingda Microelectronics datasheet](docs/md5325-1-datasheet.pdf) (12 pp, sha256 `248fdd6b5737ce18`, retrieved 2026-08-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md5325-1-datasheet.pdf)