3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMD5322
Shanghai Mingda Microelectronics · Linear Voltage Regulators (LDO) · SOT-89-3L
MD5322 from Shanghai Mingda Microelectronics, in a SOT-89-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin (VSS) of the regulator; keep the wiring impedance low and place the output capacitor close to VOUT and GND. |
| 2 | VIN | power_in | Input voltage pin; absolute maximum 12 V, operating input up to 10 V, with a 1.0 µF or larger input capacitor recommended. |
| 3 | VOUT | power_out | Regulated 2.2 V output (±2%) for the MD5322, rated up to 500 mA, with short-circuit current of about 50 mA typical and a 2.2 µF or larger output capacitor required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | SOT-89-3L |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (absolute maximum) | VIN | 12 | V | 2 | |||
| Power dissipation SOT-89 | PD | 1000 | mW | Ta=25°C (table note) | 2 | ||
| Operating ambient temperature range | TOPR | -40 | 85 | °C | 3 | ||
| Storage ambient temperature range | TSTG | -40 | 125 | °C | 3 | ||
| Input stability | ΔVOUT1/ΔVIN*VOUT | 0.15 | 0.3 | %/V | VOUT+1V≤VIN≤10V, IOUT=10mA | 3 | |
| Load regulation | ΔVOUT2 | 15 | 30 | mV | VIN=VOUT+1V, 1mA≤IOUT≤100mA | 3 | |
| Output current | IOUT | 500 | mA | VIN=VOUT+1V | 3 | ||
| Output voltage temperature coefficient | ΔVOUT/ΔTa*VOUT | -100 | 50 | 100 | ppm/℃ | VIN=VOUT+1V, IOUT=1mA, -40℃≤Ta≤125℃ | 3 |
| Quiescent current | ISS1 | 1.2 | 2.5 | uA | VIN=10V, no load | 3 | |
| Input voltage (operating) | VIN | 10 | V | 3 | |||
| Output short-circuit current | ISHORT | 50 | 70 | mA | VOUT=0V | 3 | |
| Power supply ripple rejection ratio | PSRR | 40 | dB | f=100Hz, IOUT=10mA | 3 | ||
| Power supply ripple rejection ratio | PSRR | 20 | dB | f=1kHz, IOUT=10mA | 3 | ||
| Thermal resistance junction-to-ambient SOT-89 | RθJA | 100 | ℃/W | 3 |
CAD (KiCad official)
- Symbol:
MD5322 - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3L (KiCad packages3D, STEP)
- 3D model files:
md5322-etched.step/md5322-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md5322.step/md5322.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (17 pp, sha256
0399e6cc194b1b17, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).