main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers md52e15qc3: viewers · Ray
md52e15qc3-etched.glb Publish 0.1.0 · Ray
md52e15qc3-etched.step md52e15qc3: factory component page (tier=lcsc) · Ray
md52e15qc3-hero.glb md52e15qc3: hero GLB from the etched model (keeps the MPN mark) · Ray
md52e15qc3-hero.overlay.json Publish 0.1.0 · Ray
md52e15qc3.glb Publish 0.1.0 · Ray
md52e15qc3.kicad_mod Publish 0.1.0 · Ray
md52e15qc3.kicad_sym Publish 0.1.0 · Ray
md52e15qc3.lbr Publish 0.1.0 · Ray
md52e15qc3.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

MD52E15QC3

Shanghai Mingda Microelectronics · Linear Voltage Regulators (LDO) · SOT-23-5L

MD52E15QC3 from Shanghai Mingda Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply pin; the datasheet gives an input voltage range of 2.2V to 7.0V and an absolute maximum rating of -0.3V to 8V.
2 GND power_in Ground reference pin for the regulator; the datasheet shows it as the common return connected to the internal discharge switch between VOUT and GND.
3 EN input ON/OFF control pin with enable-high logic; the datasheet gives an EN high level of 1.0V to 7.0V and an EN low level of 0V to 0.38V.
4 NC unconnected No connection; the datasheet gives no electrical function for this pin.
5 VOUT power_out Regulated output pin of the 1.5V LDO; the datasheet states that VOUT must not exceed VIN+0.3V, and the output is rated up to 500mA.

Key specifications

Parameter Value
Manufacturer Shanghai Mingda Microelectronics
Package SOT-23-5L
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT(S) -0.03 0.03 V VIN=VOUT(S)+2.0V, IOUT=10mA, VOUT(S)<2.0V 4
Line Regulation ΔVOUT/ΔVIN 0.05 0.1 %/V VOUT(S)+0.5V≤VIN=VEN≤7V, IOUT=10mA 4
Load Regulation VOUT2 50 90 mV VIN=VEN=VOUT(S)+1.0V, 1mA≤IOUT≤500mA 4
Temperature Stability -50 50 ppm/℃ VIN=VEN=VOUT(S)+1.0V, IOUT=1mA, -40℃≤Ta≤125℃ 4
GND Current (no load) IGND 0.6 0.9 μA VEN=VIN, no load 4
Shutdown Current ISHUT 0.01 0.1 μA VIN=7.0V, VEN=0 4
Input Voltage VIN 2.2 7 V 4
Maximum Output Current IOUTMAX 450 500 mA 4
COUT Auto Discharge RDCHG 280 450 640 Ω VEN=0, VOUT=VOUT(S) 4
EN 'H' Level Voltage VENH 1 7 V 4
EN 'L' Level Voltage VENL 0 0.38 V 4
EN 'H' Level Current IENH -0.1 0.1 μA VIN=7.0V, VEN=VIN 4
EN 'L' Level Current IENL -0.1 0.1 μA VIN=7.0V, VEN=0 4
Input Voltage (absolute maximum) VIN -0.3 8 V 3
Operating Ambient Temperature Topr -40 85 ℃ 3
Storage Temperature Tstg -40 125 ℃ 3
ESD Protection HBM ESD HBM 6000 V HBM 3
Power Dissipation SOT23-5 PD 250 mW SOT23-5 package 3
Thermal Resistance RθJB SOT23-5 RθJB 180 ℃/W SOT23-5, mounted on JEDEC 4-layer (2s2p) PCB 3
Dropout Voltage VDROP 240 mV VEN=VIN, VOUT<3V, IOUT=500mA 4
GND Current at IOUT=500mA IGND 210 μA IOUT=500mA 4
Current Limit ILIM 750 mA VIN=VEN=VOUT(S)+1.0V, VOUT=0.95×VOUT(S) 4
Short Circuit Current ISHORT 50 mA VIN=VEN=VOUT(S)+1.0V, VOUT=0V 4
Power Supply Rejection Ratio f=10Hz PSRR 64 dB f=10Hz, IOUT=10mA 4
Power Supply Rejection Ratio f=100Hz PSRR 51 dB f=100Hz, IOUT=10mA 4
Power Supply Rejection Ratio f=1kHz PSRR 34 dB f=1kHz, IOUT=10mA 4

CAD (KiCad official)

  • Symbol: MD52E15QC3
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)
  • 3D model files: md52e15qc3-etched.step / md52e15qc3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); md52e15qc3.step / md52e15qc3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shanghai Mingda Microelectronics datasheet (14 pp, sha256 d323bc81a3ded089, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF