3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMD52E12WB6
Shanghai Mingda Microelectronics · Linear Voltage Regulators (LDO) · DFN1x1-4L
MD52E12WB6 from Shanghai Mingda Microelectronics, in a DFN1x1-4L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; the datasheet gives an input voltage range of 2.2 V to 7.0 V, with an absolute maximum rating of -0.3 V to 8 V. |
| 2 | EN | input | Active-high ON/OFF enable pin; EN high is 1.0 V to 7.0 V and EN low is 0 V to 0.38 V, and a low level also activates the COUT auto-discharge. |
| 3 | GND | power_in | Ground reference pin; the COUT auto-discharge switch is connected between VOUT and GND. |
| 4 | VOUT | power_out | Regulated output pin delivering up to 500 mA, and VOUT must not be driven above VIN+0.3 V. |
| 5 | EP | passive | Exposed pad shown on the DFN1*1-4L outline; the datasheet does not state an electrical function or connection for it. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Mingda Microelectronics |
| Package | DFN1x1-4L |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Dropout Voltage | VDROP | 240 | mV | VEN=VIN, VOUT<3V, IOUT=500mA | 4 | ||
| Line Regulation | 0.05 | 0.1 | %/V | VOUT(S)+0.5V≤VIN=VEN≤7V, IOUT=10mA | 4 | ||
| Load Regulation | 50 | 90 | mV | VIN=VEN=VOUT(S)+1.0V, 1mA≤IOUT≤500mA | 4 | ||
| Temperature Stability | -50 | 50 | ppm/℃ | VIN=VEN=VOUT(S)+1.0V, IOUT=1mA, -40℃≤Ta≤125℃ | 4 | ||
| GND Current (no load) | IGND | 0.6 | 0.9 | μA | VEN=VIN, no load | 4 | |
| GND Current (IOUT=500mA) | IGND | 210 | μA | VEN=VIN, IOUT=500mA | 4 | ||
| Shutdown Current | ISHUT | 0.01 | 0.1 | μA | VIN=7.0V, VEN=0 | 4 | |
| Input Voltage | VIN | 2.2 | 7 | V | 4 | ||
| Maximum Output Current | IOUTMAX | 450 | 500 | mA | 4 | ||
| Current Limit | ILIM | 750 | mA | VIN=VEN=VOUT(S)+1.0V, VOUT = 0.95 ×VOUT(S) | 4 | ||
| Short Circuit Current | ISHORT | 50 | mA | VIN=VEN=VOUT(S)+1.0V, VOUT=0V | 4 | ||
| COUT Auto Discharge Resistance | RDCHG | 280 | 450 | 640 | Ω | VEN=0, VOUT=VOUT(S) | 4 |
| Power Supply Rejection Ratio (f=10Hz) | PSRR | 64 | dB | f=10Hz, IOUT=10mA | 4 | ||
| Power Supply Rejection Ratio (f=100Hz) | PSRR | 51 | dB | f=100Hz, IOUT=10mA | 4 | ||
| Power Supply Rejection Ratio (f=1kHz) | PSRR | 34 | dB | f=1kHz, IOUT=10mA | 4 | ||
| EN 'H' Level Voltage | VENH | 1 | 7 | V | 4 | ||
| EN 'L' Level Voltage | VENL | 0 | 0.38 | V | 4 | ||
| EN 'H' Level Current | IENH | -0.1 | 0.1 | μA | VIN=7.0V, VEN=VIN | 4 | |
| EN 'L' Level Current | IENL | -0.1 | 0.1 | μA | VIN=7.0V, VEN=0 | 4 | |
| Input Voltage (absolute maximum) | VIN | -0.3 | 8 | V | Unless otherwise indicated: Ta=25℃ | 3 | |
| Power Dissipation DFN1*1-4L | PD | 200 | mW | Unless otherwise indicated: Ta=25℃ | 3 | ||
| Thermal Resistance DFN1*1-4L | RθJB | 160 | ℃/W | Mounted on JEDEC standard 4layer (2s2p) PCB test board | 3 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 3 | ||
| Storage Temperature | Tstg | -40 | 125 | ℃ | 3 | ||
| ESD Protection HBM | ESD HBM | 6000 | V | 3 |
CAD (KiCad official)
- Symbol:
MD52E12WB6 - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN1x1-4L (KiCad packages3D, STEP)
- 3D model files:
md52e12wb6-etched.step/md52e12wb6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md52e12wb6.step/md52e12wb6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Mingda Microelectronics datasheet (14 pp, sha256
11f4b5d8b0feb201, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).