main
Ray
Publish 0.1.0
100e47e
MD25Q128SIGR
GigaDevice Semicon Beijing · NOR FLASH · SOP-8-208mil
MD25Q128SIGR from GigaDevice Semicon Beijing, in a SOP-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input; must be driven high when the chip is not selected and must not be left floating after power is on. |
| 2 | SO (IO1) | bidirectional | Serial data output in standard SPI, and Data Input/Output 1 in Dual and Quad SPI. |
| 3 | WP# (IO2) | bidirectional | Write Protect input in standard SPI, and Data Input/Output 2 in Quad SPI. |
| 4 | VSS | power_in | Ground. |
| 5 | SI (IO0) | bidirectional | Serial data input in standard SPI, and Data Input/Output 0 in Dual and Quad SPI. |
| 6 | SCLK | input | Serial Clock input. |
| 7 | HOLD#/RESET# (IO3) | bidirectional | Hold or Reset input in standard SPI, and Data Input/Output 3 in Quad SPI. |
| 8 | VCC | power_in | Power supply, 2.7 to 3.6V full voltage range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | SOP-8-208mil |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.7 | 3.6 | V | VCC=2.7~3.6V | 39 | |
| Operating temperature | T | -40 | 85 | ℃ | Industrial | 39 | |
| Input Leakage Current | ILI | -2 | 2 | μA | 39 | ||
| Output Leakage Current | ILO | -2 | 2 | μA | 39 | ||
| Standby Current | ICC1 | 20 | 50 | μA | CS#=VCC, VIN=VCC or VSS | 39 | |
| Deep Power-Down Current | ICC2 | 1 | 5 | μA | CS#=VCC, VIN=VCC or VSS | 39 | |
| Operating Current (Read) 104MHz | ICC3 | 15 | 20 | mA | CLK=0.1VCC/0.9VCC at 104MHz, Q=Open(*1 I/O) | 39 | |
| Operating Current (Read) 80MHz | ICC3 | 13 | 18 | mA | CLK=0.1VCC/0.9VCC at 80MHz, Q=Open(*1,*2,*4 I/O) | 39 | |
| Operating Current (PP) | ICC4 | 25 | mA | CS#=VCC | 39 | ||
| Operating Current (WRSR) | ICC5 | 25 | mA | CS#=VCC | 39 | ||
| Operating Current (SE) | ICC6 | 25 | mA | CS#=VCC | 39 | ||
| Operating Current (BE) | ICC7 | 25 | mA | CS#=VCC | 39 | ||
| Operating Current (CE) | ICC8 | 25 | mA | CS#=VCC | 39 | ||
| Output Low Voltage | VOL | 0.2 | V | IOL =100uA | 39 | ||
| VCC (min) to CS# Low | tVSL | 5 | ms | 37 | |||
| Write Inhibit Voltage | VWI | 1.5 | 2.5 | V | 37 | ||
| Ambient Operating Temperature | -40 | 85 | ℃ | 37 | |||
| Storage Temperature | -65 | 150 | ℃ | 37 | |||
| Applied Input/Output Voltage | -0.6 | V | -0.6 to VCC+0.4 V (upper limit VCC+0.4) | 37 | |||
| Transient Input/Output Voltage (overshoot) | -2 | V | -2.0 to VCC+2.0 V (upper limit VCC+2.0) | 37 | |||
| VCC | VCC | -0.6 | 4.2 | V | 37 | ||
| Input Capacitance | CIN | 6 | pF | VIN=0V | 38 | ||
| Output Capacitance | COUT | 8 | pF | VOUT=0V | 38 | ||
| Serial Clock Frequency Fast Read (0BH) | FC | 104 | MHz | 2.7V-3.6V, CL=30pf | 41 | ||
| Serial Clock Frequency Dual/Quad 2.7-3.0V | fC1 | 80 | MHz | 2.7V-3.0V power supply | 41 | ||
| Serial Clock Frequency Dual/Quad 3.0-3.6V | fC2 | 104 | MHz | 3.0V-3.6V power supply | 41 | ||
| Serial Clock Frequency Read (03H) | fR | 80 | MHz | Read (03H), 90H, 9FH | 41 | ||
| Serial Clock High Time | tCLH | 4.5 | ns | 41 | |||
| Serial Clock Low Time | tCLL | 4.5 | ns | 41 | |||
| CS# High Time (Read/Write) | tSHSL | 20 | ns | 41 | |||
| Output Disable Time | tSHQZ | 6 | ns | 41 | |||
| Clock Low To Output Valid | tCLQV | 7 | ns | 41 | |||
| CS# High To Deep Power-Down Mode | tDP | 20 | μs | 41 | |||
| CS# High To Standby Mode Without Electronic Signature Read | tRES1 | 30 | μs | 41 | |||
| CS# High To Standby Mode With Electronic Signature Read | tRES2 | 30 | μs | 41 | |||
| CS# High To Next Command After Suspend | tSUS | 20 | μs | 41 | |||
| CS# High To Next Command After Reset (Except From Erase) | tRST | 30 | μs | 41 | |||
| CS# High To Next Command After Reset (From Erase) | tRST_E | 12 | ms | 42 | |||
| Write Status Register Cycle Time | tW | 5 | 30 | ms | 42 | ||
| Byte Program Time (First Byte) | tBP1 | 30 | 50 | μs | 42 | ||
| Additional Byte Program Time | tBP2 | 2.5 | 12 | μs | After First Byte | 42 | |
| Page Programming Time | tPP | 0.6 | 4 | ms | 42 | ||
| Sector Erase Time | tSE | 50 | 500 | ms | 42 | ||
| Block Erase Time (32K Bytes) | tBE1 | 0.2 | 2 | s | 42 | ||
| Block Erase Time (64K Bytes) | tBE2 | 0.3 | 2.5 | s | 42 | ||
| Chip Erase Time | tCE | 60 | 200 | s | MD25Q128 | 42 | |
| Reset Pulse Width | tRLRH | 1 | μs | 45 | |||
| Reset High Time Before Read | tRHSL | 50 | ns | 45 |
CAD (KiCad official)
- Symbol:
MD25Q128SIGR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8-208mil (KiCad packages3D, STEP)
- 3D model files:
md25q128sigr-etched.step/md25q128sigr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);md25q128sigr.step/md25q128sigr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GigaDevice Semicon Beijing datasheet (55 pp, sha256
bfbd498bf3a5d54d, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MD25Q128SIGR
**GigaDevice Semicon Beijing** · NOR FLASH · SOP-8-208mil
MD25Q128SIGR from GigaDevice Semicon Beijing, in a SOP-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input; must be driven high when the chip is not selected and must not be left floating after power is on. |
| 2 | SO (IO1) | bidirectional | Serial data output in standard SPI, and Data Input/Output 1 in Dual and Quad SPI. |
| 3 | WP# (IO2) | bidirectional | Write Protect input in standard SPI, and Data Input/Output 2 in Quad SPI. |
| 4 | VSS | power_in | Ground. |
| 5 | SI (IO0) | bidirectional | Serial data input in standard SPI, and Data Input/Output 0 in Dual and Quad SPI. |
| 6 | SCLK | input | Serial Clock input. |
| 7 | HOLD#/RESET# (IO3) | bidirectional | Hold or Reset input in standard SPI, and Data Input/Output 3 in Quad SPI. |
| 8 | VCC | power_in | Power supply, 2.7 to 3.6V full voltage range. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GigaDevice Semicon Beijing |
| Package | SOP-8-208mil |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.7 | | 3.6 | V | VCC=2.7~3.6V | 39 |
| Operating temperature | T | -40 | | 85 | ℃ | Industrial | 39 |
| Input Leakage Current | ILI | -2 | | 2 | μA | | 39 |
| Output Leakage Current | ILO | -2 | | 2 | μA | | 39 |
| Standby Current | ICC1 | | 20 | 50 | μA | CS#=VCC, VIN=VCC or VSS | 39 |
| Deep Power-Down Current | ICC2 | | 1 | 5 | μA | CS#=VCC, VIN=VCC or VSS | 39 |
| Operating Current (Read) 104MHz | ICC3 | | 15 | 20 | mA | CLK=0.1VCC/0.9VCC at 104MHz, Q=Open(*1 I/O) | 39 |
| Operating Current (Read) 80MHz | ICC3 | | 13 | 18 | mA | CLK=0.1VCC/0.9VCC at 80MHz, Q=Open(*1,*2,*4 I/O) | 39 |
| Operating Current (PP) | ICC4 | | | 25 | mA | CS#=VCC | 39 |
| Operating Current (WRSR) | ICC5 | | | 25 | mA | CS#=VCC | 39 |
| Operating Current (SE) | ICC6 | | | 25 | mA | CS#=VCC | 39 |
| Operating Current (BE) | ICC7 | | | 25 | mA | CS#=VCC | 39 |
| Operating Current (CE) | ICC8 | | | 25 | mA | CS#=VCC | 39 |
| Output Low Voltage | VOL | | | 0.2 | V | IOL =100uA | 39 |
| VCC (min) to CS# Low | tVSL | 5 | | | ms | | 37 |
| Write Inhibit Voltage | VWI | 1.5 | | 2.5 | V | | 37 |
| Ambient Operating Temperature | | -40 | | 85 | ℃ | | 37 |
| Storage Temperature | | -65 | | 150 | ℃ | | 37 |
| Applied Input/Output Voltage | | -0.6 | | | V | -0.6 to VCC+0.4 V (upper limit VCC+0.4) | 37 |
| Transient Input/Output Voltage (overshoot) | | -2 | | | V | -2.0 to VCC+2.0 V (upper limit VCC+2.0) | 37 |
| VCC | VCC | -0.6 | | 4.2 | V | | 37 |
| Input Capacitance | CIN | | | 6 | pF | VIN=0V | 38 |
| Output Capacitance | COUT | | | 8 | pF | VOUT=0V | 38 |
| Serial Clock Frequency Fast Read (0BH) | FC | | | 104 | MHz | 2.7V-3.6V, CL=30pf | 41 |
| Serial Clock Frequency Dual/Quad 2.7-3.0V | fC1 | | | 80 | MHz | 2.7V-3.0V power supply | 41 |
| Serial Clock Frequency Dual/Quad 3.0-3.6V | fC2 | | | 104 | MHz | 3.0V-3.6V power supply | 41 |
| Serial Clock Frequency Read (03H) | fR | | | 80 | MHz | Read (03H), 90H, 9FH | 41 |
| Serial Clock High Time | tCLH | 4.5 | | | ns | | 41 |
| Serial Clock Low Time | tCLL | 4.5 | | | ns | | 41 |
| CS# High Time (Read/Write) | tSHSL | 20 | | | ns | | 41 |
| Output Disable Time | tSHQZ | | | 6 | ns | | 41 |
| Clock Low To Output Valid | tCLQV | | | 7 | ns | | 41 |
| CS# High To Deep Power-Down Mode | tDP | | | 20 | μs | | 41 |
| CS# High To Standby Mode Without Electronic Signature Read | tRES1 | | | 30 | μs | | 41 |
| CS# High To Standby Mode With Electronic Signature Read | tRES2 | | | 30 | μs | | 41 |
| CS# High To Next Command After Suspend | tSUS | | | 20 | μs | | 41 |
| CS# High To Next Command After Reset (Except From Erase) | tRST | | | 30 | μs | | 41 |
| CS# High To Next Command After Reset (From Erase) | tRST_E | | | 12 | ms | | 42 |
| Write Status Register Cycle Time | tW | | 5 | 30 | ms | | 42 |
| Byte Program Time (First Byte) | tBP1 | | 30 | 50 | μs | | 42 |
| Additional Byte Program Time | tBP2 | | 2.5 | 12 | μs | After First Byte | 42 |
| Page Programming Time | tPP | | 0.6 | 4 | ms | | 42 |
| Sector Erase Time | tSE | | 50 | 500 | ms | | 42 |
| Block Erase Time (32K Bytes) | tBE1 | | 0.2 | 2 | s | | 42 |
| Block Erase Time (64K Bytes) | tBE2 | | 0.3 | 2.5 | s | | 42 |
| Chip Erase Time | tCE | | 60 | 200 | s | MD25Q128 | 42 |
| Reset Pulse Width | tRLRH | 1 | | | μs | | 45 |
| Reset High Time Before Read | tRHSL | 50 | | | ns | | 45 |
## CAD (KiCad official)
- Symbol: `MD25Q128SIGR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8-208mil (KiCad packages3D, STEP)
- 3D model files: `md25q128sigr-etched.step` / `md25q128sigr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `md25q128sigr.step` / `md25q128sigr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [GigaDevice Semicon Beijing datasheet](docs/md25q128sigr-datasheet.pdf) (55 pp, sha256 `bfbd498bf3a5d54d`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/md25q128sigr-datasheet.pdf)