main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs md25q128sig: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers md25q128sig: viewers · Ray
md25q128sig-etched.fit.json md25q128sig: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md25q128sig-etched.glb md25q128sig: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md25q128sig-etched.step md25q128sig: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
md25q128sig.glb Publish 0.1.0 · Ray
md25q128sig.kicad_mod Publish 0.1.0 · Ray
md25q128sig.kicad_sym Publish 0.1.0 · Ray
md25q128sig.lbr Publish 0.1.0 · Ray
md25q128sig.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json md25q128sig: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md md25q128sig: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MD25Q128SIG

GigaDevice Semicon Beijing · NOR FLASH · SOIC-8-208mil

MD25Q128SIG from GigaDevice Semicon Beijing, in a SOIC-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input, active low. Must be driven high when the chip is not selected; do not leave floating after power-on. Enables the SPI interface and starts a command sequence on the falling edge.
2 SO/IO1 bidirectional Serial Data Output in Standard SPI mode; becomes bidirectional data line IO1 in Dual/Quad SPI modes. Data shifts out on the falling edge of SCLK in Standard SPI.
3 WP#/IO2 bidirectional Write Protect input, active low, when QE=0. When the Quad Enable (QE) bit in the Status Register is set, the pin acts as bidirectional data line IO2 for Quad SPI commands.
4 VSS power_in Ground reference for the device.
5 SI/IO0 bidirectional Serial Data Input in Standard SPI mode; becomes bidirectional data line IO0 in Dual/Quad SPI modes. Input data is latched on the rising edge of SCLK in Standard SPI.
6 SCLK input Serial Clock input. Provides the timing for serial input and output operations. SPI modes 0 and 3 are supported, up to 104 MHz for Standard/Dual SPI fast read.
7 HOLD#/RESET#/IO3 bidirectional Configurable pin: acts as HOLD# (pauses serial communication, active low) or RESET# (hardware reset, active low) when QE=0, based on the HOLD/RST status register bit. Becomes bidirectional data line IO3 for Quad SPI commands when QE=1.
8 VCC power_in Single power supply input, 2.7V to 3.6V (nominal 3.3V). Powers all internal logic and flash core operations; typical active current 25mA, standby/deep-power-down current 5uA max.

Key specifications

Parameter Value
Manufacturer GigaDevice Semicon Beijing
Package SOIC-8-208mil
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MD25Q128SIG
  • MD25Q128SIGVIG
  • MD25Q128SIGPIG
  • MD25Q128SIGFIG
  • MD25Q128SIGFIR
  • MD25Q128SIGWIG
  • MD25Q128SIGYIG

CAD (KiCad official)

  • Symbol: MD25Q128SIG
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8-208mil (KiCad packages3D, STEP)
  • 3D model files: md25q128sig-etched.step / md25q128sig-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); md25q128sig.step / md25q128sig.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
md25q128sig.step 122 KB You want the bare part, or you mark your own boards.
md25q128sig-etched.step 2.5 MB You want the part with MD25Q128SIG already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 602 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GigaDevice Semicon Beijing datasheet (55 pp, sha256 bfbd498bf3a5d54d, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF