← Commit history
README.mdadded+53@@ -0,0 +1,53 @@+# MD25Q128SIG++**GigaDevice Semicon Beijing** · NOR FLASH · SOIC-8-208mil++MD25Q128SIG from GigaDevice Semicon Beijing, in a SOIC-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS# | input | Chip Select input, active low. Must be driven high when the chip is not selected; do not leave floating after power-on. Enables the SPI interface and starts a command sequence on the falling edge. |+| 2 | SO/IO1 | bidirectional | Serial Data Output in Standard SPI mode; becomes bidirectional data line IO1 in Dual/Quad SPI modes. Data shifts out on the falling edge of SCLK in Standard SPI. |+| 3 | WP#/IO2 | bidirectional | Write Protect input, active low, when QE=0. When the Quad Enable (QE) bit in the Status Register is set, the pin acts as bidirectional data line IO2 for Quad SPI commands. |+| 4 | VSS | power_in | Ground reference for the device. |+| 5 | SI/IO0 | bidirectional | Serial Data Input in Standard SPI mode; becomes bidirectional data line IO0 in Dual/Quad SPI modes. Input data is latched on the rising edge of SCLK in Standard SPI. |+| 6 | SCLK | input | Serial Clock input. Provides the timing for serial input and output operations. SPI modes 0 and 3 are supported, up to 104 MHz for Standard/Dual SPI fast read. |+| 7 | HOLD#/RESET#/IO3 | bidirectional | Configurable pin: acts as HOLD# (pauses serial communication, active low) or RESET# (hardware reset, active low) when QE=0, based on the HOLD/RST status register bit. Becomes bidirectional data line IO3 for Quad SPI commands when QE=1. |+| 8 | VCC | power_in | Single power supply input, 2.7V to 3.6V (nominal 3.3V). Powers all internal logic and flash core operations; typical active current 25mA, standby/deep-power-down current 5uA max. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GigaDevice Semicon Beijing |+| Package | SOIC-8-208mil |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `MD25Q128SIG`+- `MD25Q128SIGVIG`+- `MD25Q128SIGPIG`+- `MD25Q128SIGFIG`+- `MD25Q128SIGFIR`+- `MD25Q128SIGWIG`+- `MD25Q128SIGYIG`++## CAD (KiCad official)++- Symbol: `MD25Q128SIG`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8-208mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GigaDevice Semicon Beijing datasheet](docs/md25q128sig-datasheet.pdf) (55 pp, sha256 `bfbd498bf3a5d54d`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/md25q128sig-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "md25q128sig",+ "version": "0.1.0",+ "type": "component",+ "description": "GigaDevice Semicon Beijing NOR FLASH, SOIC-8-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "memory",+ "md25q128sig"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "md25q128sig.kicad_sym",+ "md25q128sig.kicad_mod",+ "md25q128sig.glb",+ "md25q128sig.step",+ "md25q128sig.lbr",+ "docs/hero.png",+ "docs/md25q128sig-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}