main
Ray
Publish 0.1.0
508a2c9
MCT1117C-ADJ-TP
MCC(Micro Commercial Components) · Linear Voltage Regulators (LDO) · SOT-223
MCT1117C-ADJ-TP from MCC(Micro Commercial Components), in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | power_in | The ADJ/GND pin is the adjust/ground terminal, and on the ADJ version the reference voltage is 1.25V typical (1.225V to 1.275V), with output set by two external resistors. |
| 2 | OUTPUT | power_out | The OUTPUT pin delivers the regulated voltage, adjustable from 1.25V to 12V on the ADJ version, with a maximum output current of 1.0A. |
| 3 | IN | power_in | The IN pin is the regulator input, with a maximum input voltage of 30V absolute maximum and a recommended maximum of 18V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MCC(Micro Commercial Components) |
| Package | SOT-223 |
| Category | Power Management |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage ADJ | Vout | 1.225 | 1.25 | 1.275 | V | 0≤Iout≤1A , Vin=3.8V | 3 |
| Line Regulation ADJ | ΔVout | 0.03 | 0.2 | %/V | Iout=10mA, 2.75V≤Vin≤12V | 3 | |
| Load Regulation ADJ | ΔVout | 2 | 8 | mV | Vin =2.75V, 10mA≤Iout≤1A | 4 | |
| Dropout Voltage at 100mA | Vdrop | 1.15 | 1.3 | V | Iout =100mA | 4 | |
| Dropout Voltage at 1A | Vdrop | 1.3 | 1.4 | V | Iout=1A | 4 | |
| Quiescent Current ADJ | Iq | 2 | 10 | mA | 4 | ||
| Adjust Pin Current | Iadj | 55 | 120 | µA | 4 | ||
| Iadj Change | Ichange | 0.2 | 10 | µA | Vin =5V, 10mA≤Iout≤1A | 4 | |
| Maximum Output Current | Iout(max) | 1.2 | A | 4 | |||
| Ripple Rejection PSRR at 120Hz | PSRR | 60 | dB | VIN=VOUT+2V, IOUT = 100mA, Ripple 1.0 Vp-p, f=120Hz | 4 | ||
| Ripple Rejection PSRR at 1kHz | PSRR | 62 | dB | VIN=VOUT+2V, IOUT = 100mA, Ripple 1.0 Vp-p, f=1KHz | 4 | ||
| RMS Output Noise | VNOISE | 0.005 | % | 10Hz ≤ f ≤ 100kHz, No Load | 4 | ||
| Thermal Shutdown Temperature | TOTSD | 220 | ℃ | 4 | |||
| Thermal Shutdown Hysteresis | THYOTSD | 20 | ℃ | 4 | |||
| Temperature Coefficient | ΔV/ΔT | -100 | 100 | ppm | 20℃≤Ta≤120℃ | 4 | |
| Max Input Voltage | 30 | V | 3 | ||||
| Max Operating Junction Temperature | 150 | ℃ | 3 | ||||
| Ambient Temperature Range | -40 | 85 | ℃ | 3 | |||
| Storage Temperature Range | -40 | 150 | ℃ | 3 | |||
| Lead Temperature | 260 | ℃ | 10s | 3 | |||
| Recommended Maximum Input Voltage | 18 | V | 3 | ||||
| Recommended Operating Junction Temperature | -20 | 125 | ℃ | 3 | |||
| Thermal Resistance Junction-to-Case SOT-223 | θJC | 20 | ℃/W | 3 | |||
| Thermal Resistance Junction-to-Ambient SOT-223 | θJA | 60 | ℃/W | 3 | |||
| Power Dissipation SOT-223 | 1.2 | W | 3 |
CAD (KiCad official)
- Symbol:
MCT1117C-ADJ-TP - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
mct1117c-adj-tp-etched.step/mct1117c-adj-tp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mct1117c-adj-tp.step/mct1117c-adj-tp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MCC(Micro Commercial Components) datasheet (6 pp, sha256
c724116a00dc1526, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCT1117C-ADJ-TP
**MCC(Micro Commercial Components)** · Linear Voltage Regulators (LDO) · SOT-223
MCT1117C-ADJ-TP from MCC(Micro Commercial Components), in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ/GND | power_in | The ADJ/GND pin is the adjust/ground terminal, and on the ADJ version the reference voltage is 1.25V typical (1.225V to 1.275V), with output set by two external resistors. |
| 2 | OUTPUT | power_out | The OUTPUT pin delivers the regulated voltage, adjustable from 1.25V to 12V on the ADJ version, with a maximum output current of 1.0A. |
| 3 | IN | power_in | The IN pin is the regulator input, with a maximum input voltage of 30V absolute maximum and a recommended maximum of 18V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MCC(Micro Commercial Components) |
| Package | SOT-223 |
| Category | Power Management |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage ADJ | Vout | 1.225 | 1.25 | 1.275 | V | 0≤Iout≤1A , Vin=3.8V | 3 |
| Line Regulation ADJ | ΔVout | | 0.03 | 0.2 | %/V | Iout=10mA, 2.75V≤Vin≤12V | 3 |
| Load Regulation ADJ | ΔVout | | 2 | 8 | mV | Vin =2.75V, 10mA≤Iout≤1A | 4 |
| Dropout Voltage at 100mA | Vdrop | | 1.15 | 1.3 | V | Iout =100mA | 4 |
| Dropout Voltage at 1A | Vdrop | | 1.3 | 1.4 | V | Iout=1A | 4 |
| Quiescent Current ADJ | Iq | | 2 | 10 | mA | | 4 |
| Adjust Pin Current | Iadj | | 55 | 120 | µA | | 4 |
| Iadj Change | Ichange | | 0.2 | 10 | µA | Vin =5V, 10mA≤Iout≤1A | 4 |
| Maximum Output Current | Iout(max) | | 1.2 | | A | | 4 |
| Ripple Rejection PSRR at 120Hz | PSRR | | 60 | | dB | VIN=VOUT+2V, IOUT = 100mA, Ripple 1.0 Vp-p, f=120Hz | 4 |
| Ripple Rejection PSRR at 1kHz | PSRR | | 62 | | dB | VIN=VOUT+2V, IOUT = 100mA, Ripple 1.0 Vp-p, f=1KHz | 4 |
| RMS Output Noise | VNOISE | | 0.005 | | % | 10Hz ≤ f ≤ 100kHz, No Load | 4 |
| Thermal Shutdown Temperature | TOTSD | | 220 | | ℃ | | 4 |
| Thermal Shutdown Hysteresis | THYOTSD | | 20 | | ℃ | | 4 |
| Temperature Coefficient | ΔV/ΔT | -100 | | 100 | ppm | 20℃≤Ta≤120℃ | 4 |
| Max Input Voltage | | | | 30 | V | | 3 |
| Max Operating Junction Temperature | | | | 150 | ℃ | | 3 |
| Ambient Temperature Range | | -40 | | 85 | ℃ | | 3 |
| Storage Temperature Range | | -40 | | 150 | ℃ | | 3 |
| Lead Temperature | | | | 260 | ℃ | 10s | 3 |
| Recommended Maximum Input Voltage | | | | 18 | V | | 3 |
| Recommended Operating Junction Temperature | | -20 | | 125 | ℃ | | 3 |
| Thermal Resistance Junction-to-Case SOT-223 | θJC | | 20 | | ℃/W | | 3 |
| Thermal Resistance Junction-to-Ambient SOT-223 | θJA | | 60 | | ℃/W | | 3 |
| Power Dissipation SOT-223 | | | 1.2 | | W | | 3 |
## CAD (KiCad official)
- Symbol: `MCT1117C-ADJ-TP`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files: `mct1117c-adj-tp-etched.step` / `mct1117c-adj-tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mct1117c-adj-tp.step` / `mct1117c-adj-tp.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MCC(Micro Commercial Components) datasheet](docs/mct1117c-adj-tp-datasheet.pdf) (6 pp, sha256 `c724116a00dc1526`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mct1117c-adj-tp-datasheet.pdf)