Generated by kicad-footprint-generator · KiCad file format 20260206
MCS1806GS-5-40-Z
Monolithic Power Systems · Current Sensors · SOIC-8
MCS1806GS-5-40-Z from Monolithic Power Systems, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Primary current (+) terminal for the current being sampled, internally connected to pin 2; this variant (MCS1806GS-5-40-Z) is optimized for ±40A. |
| 2 | IP+ | passive | Primary current (+) terminal for the current being sampled, internally connected to pin 1; this variant (MCS1806GS-5-40-Z) is optimized for ±40A. |
| 3 | IP- | passive | Primary current (-) terminal for the current being sampled, internally connected to pin 4; this variant (MCS1806GS-5-40-Z) is optimized for ±40A. |
| 4 | IP- | passive | Primary current (-) terminal for the current being sampled, internally connected to pin 3; this variant (MCS1806GS-5-40-Z) is optimized for ±40A. |
| 5 | GND | power_in | Signal ground terminal pin, the reference for the analog output and the FILT capacitor. |
| 6 | FILT | passive | Filter terminal for the external capacitor CF that sets the bandwidth, and it can be left floating if the bandwidth setting is not required. |
| 7 | VOUT | output | Analog output proportional to the primary current; the datasheet specifies a load limit of 10 nF and a resistive load of 4.7 kΩ from VOUT to GND. |
| 8 | VCC | power_in | Voltage supply, which for the 5V option must be within 4.5V to 5.5V and should be bypassed with a 1µF low-ESR ceramic capacitor placed as close to the pin as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Optimized accuracy range | IP | -40 | 40 | A | 9 | ||
| Sensitivity error | ESENS | -2 | 2 | % | IP = 40A, TJ = 25°C to 125°C | 9 | |
| Sensitivity error | ESENS | -1.5 | 1.5 | % | IP = 40A, TJ = -40°C to +25°C | 9 | |
| Offset voltage | VOE | -10 | 10 | mV | IP = 0A, TJ = 25°C to 125°C | 9 | |
| Offset voltage | VOE | -5 | 5 | mV | IP = 0A, TJ = -40°C to +25°C | 9 | |
| Total output error | ETOT | -2.5 | 2.5 | % | IP = 40A, TJ = 25°C to 125°C | 9 | |
| Total output error | ETOT | -1.5 | 1.5 | % | IP = 40A, TJ = -40°C to +25°C | 9 | |
| Sensitivity error lifetime drift | ESENS(D) | -1 | 1 | % | 9 | ||
| Total output error lifetime drift | ETOT(D) | -1 | 1 | % | 9 | ||
| Supply voltage, 5V option | VCC | 4.5 | 5.5 | V | 5V option | 5 | |
| VCC under-voltage lockout (UVLO) threshold | VCC_UVLO | 2 | 2.5 | 3 | V | VCC rising | 5 |
| VCC UVLO hysteresis | VCC_UVLO_HYS | 400 | 750 | mV | 5 | ||
| Operating supply current | ICC | 8.5 | 10.5 | mA | 5 | ||
| Output capacitance load | CL | 10 | nF | From VOUT to GND | 5 | ||
| Output resistive load | RL | 4.7 | kΩ | From VOUT to GND | 5 | ||
| Nonlinearity | ELIN | 0.5 | % | Across full IP range | 5 | ||
| Ratiometry coefficient, sensitivity | KSENS | 98 | 100 | 102 | % | VCC from VCC_MIN to VCC_MAX | 5 |
| Ratiometry coefficient, zero-current output | KVO | 99 | 100 | 101 | % | VCC from VCC_MIN to VCC_MAX | 5 |
| Hall plate matching | MH | -1 | 1 | % | 5 | ||
| Saturation voltage, low | VOUT(L) | 0.5 | V | 5V option, RL = 4.7kΩ | 5 | ||
| Sensitivity | SENS | 50 | mV/A | -40A ≤ IP ≤ +40A, TJ = 25°C | 9 | ||
| Primary conductor resistance | RP | 0.9 | mΩ | Effective (total resistance, see note 10) | 5 | ||
| Supply voltage, 5V option (recommended) | VCC | 4.5 | 5.5 | V | 5V option | 3 | |
| Operating junction temperature | TJ | -40 | 125 | °C | 3 | ||
| Supply voltage | VCC | -0.1 | 6 | V | 3 | ||
| Output voltage | VOUT | -0.1 | 6 | V | 3 | ||
| Filter voltage | VFILT | -0.1 | 6 | V | 3 | ||
| Junction temperature | 165 | °C | 3 | ||||
| Storage temperature | -65 | 165 | °C | 3 | |||
| ESD human body model | -2 | 2 | kV | Human body model (HBM) | 3 | ||
| ESD charged device model | -2 | 2 | kV | Charged device model (CDM) | 3 | ||
| Dielectric surge strength test voltage | VSURGE | 6000 | V | Test ±5 pulses at 2/minute, 1.2µs (rise)/50µs (width) per IEC61000-4-5 | 4 | ||
| Withstand isolation voltage | VISO | 3000 | VRMS | Agency type-tested for 60 seconds per IEC62368-1 | 4 | ||
| Maximum isolation working voltage | VIOWM | 500 | VRMS | Maximum approved working voltage for basic isolation per IEC62368-1 | 4 | ||
| Maximum isolation working voltage | VIOWM | 700 | VPK or VDC | Maximum approved working voltage for basic isolation per IEC62368-1 | 4 | ||
| External clearance | CLR | 4.2 | mm | Shortest distance through the air from the IP leads to the signal leads | 4 | ||
| External creepage | CPG | 4.2 | mm | Shortest distance along the package body from the IP leads to the signal leads | 4 | ||
| Surge current | ISURGE | 3000 | A | Test ±5 pulses at 2/minute, 8µs (rise)/20µs (width) per IEC61000-4-5 | 4 | ||
| Transient current | ITRANSIENT | 250 | A | Single peak, 10ms | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | the primary conductor via the IP+ and IPpins. 2. Ensure that the copper covers both the top | 15 |
CAD (KiCad official)
- Symbol:
MCS1806GS-5-40-Z - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcs1806gs-5-40-z-etched.step/mcs1806gs-5-40-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcs1806gs-5-40-z.step/mcs1806gs-5-40-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (19 pp, sha256
48cef136766659b9, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).