Generated by kicad-footprint-generator · KiCad file format 20260206
MCP9700T-H
Microchip Tech · Temperature Sensors · SC-70-5
MCP9700T-H from Microchip Tech, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No Connect: not connected to the die, but can be tied to a PCB trace from the thermal source to improve thermal conduction to the package. |
| 2 | GND | power_in | Power ground pin, the system ground. |
| 3 | VOUT | output | Sensor output voltage pin, ranging 100 mV to 1.75V over the operating temperature range for the MCP9700, and sources/sinks 100 µA (max.). |
| 4 | VDD | power_in | Power supply input, 2.3V to 5.5V for the MCP9700, with a 0.1 µF to 1 µF decoupling capacitor to GND recommended close to the pin. |
| 5 | NC | unconnected | No Connect: not connected to the die, but can be tied to a PCB trace from the thermal source to improve thermal conduction to the package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SC-70-5 |
| Category | Sensors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.3 | 5.5 | V | MCP9700/9700A/9700B | 3 | |
| Operating Current | IDD | 6 | 12 | µA | 3 | ||
| Operating Current (High Temperature) | IDD | 15 | µA | TA = +150°C (Note 1) | 3 | ||
| Sensor Accuracy 0°C to +70°C | TACY | -4 | 2 | 4 | °C | TA = 0°C to +70°C, MCP9700/9701 | 3 |
| Sensor Accuracy -40°C to +125°C | TACY | -4 | 2 | 6 | °C | TA = -40°C to +125°C, MCP9700 | 3 |
| Sensor Accuracy -40°C to +150°C High Temperature | TACY | -4 | 2 | 6 | °C | TA = -40°C to +150°C, MCP9700 High Temperature (Note 1) | 3 |
| Output Current | IOUT | 100 | µA | 4 | |||
| Line Regulation | °C/VDD | 0.1 | °C/V | 3 | |||
| Sensor Accuracy at +25°C | TACY | 1 | °C | TA = +25°C | 3 | ||
| Output Voltage at 0°C | V0°C | 500 | mV | TA = 0°C, MCP9700/9700A/9700B | 3 | ||
| Temperature Coefficient | TC | 10 | mV/°C | MCP9700/9700A/9700B | 4 | ||
| Output Nonlinearity | VONL | 0.5 | °C | TA = 0°C to +70°C (Note 3) | 4 | ||
| Output Impedance | ZOUT | 20 | Ω | IOUT = 100 µA, f = 500 Hz | 4 | ||
| Output Load Regulation | ΔVOUT/ΔIOUT | 2 | Ω | TA = 0°C to +70°C, IOUT = 100 µA | 4 | ||
| Turn-On Time | tON | 800 | µs | 4 | |||
| Typical Load Capacitance | CLOAD | 1000 | pF | Note 4 | 4 | ||
| SC-70 Thermal Response to 63% | tRES | 1.3 | s | 30°C (Air) to +125°C (Fluid Bath) (Note 5) | 4 | ||
| Specified Temperature Range (High Temperature) | TA | -40 | 150 | °C | High Temperature (MCP9700 and MCP9700B SOT23-3 and SC70-5 only) | 4 | |
| Operating Temperature Range (High Temperature) | TA | -40 | 150 | °C | High Temperature | 4 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Thermal Resistance, 5LD SC70 | θJA | 331 | °C/W | 4 | |||
| Supply Voltage | VDD | 6 | V | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Ambient Temp. with Power Applied | -40 | 150 | °C | 3 | |||
| Output Current | -30 | 30 | mA | 3 | |||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| ESD Protection on All Pins (HBM) | 2 | kV | HBM | 3 | |||
| ESD Protection on All Pins (MM) | 200 | V | MM | 3 | |||
| Latch-Up Current at Each Pin | -200 | 200 | mA | 3 |
CAD (KiCad official)
- Symbol:
MCP9700T-H - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
mcp9700t-h-etched.step/mcp9700t-h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp9700t-h.step/mcp9700t-h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (26 pp, sha256
5b0e0efe173d5fda, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).