component
MCP9600-E
Public Made by Adomby adom
Microchip Tech ADCs/DACs - Special Purpose, QFN-20-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMCP9600-E
Microchip Tech · ADCs/DACs - Special Purpose · QFN-20-EP(5x5)
MCP9600-E from Microchip Tech, in a QFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | System electrical ground pin at same potential as pins 3, 5, 13, and 17. |
| 2 | VIN+ | power_in | Thermocouple positive terminal input for conversion of thermocouple EMF voltage to degree Celsius. |
| 3 | GND | power_in | System electrical ground pin at same potential as pins 1, 5, 13, and 17. |
| 4 | VIN- | power_in | Thermocouple negative terminal input for conversion of thermocouple EMF voltage to degree Celsius. |
| 5 | GND | power_in | System electrical ground pin at same potential as pins 1, 3, 13, and 17. |
| 6 | GND | power_in | Functional ground pin requiring connection to ground for normal device operation. |
| 7 | GND | power_in | Functional ground pin requiring connection to ground for normal device operation. |
| 8 | VDD | power_in | Power supply pin accepting operating voltage in range 2.7V to 5.5V. |
| 9 | GND | power_in | Functional ground pin requiring connection to ground for normal device operation. |
| 10 | GND | power_in | Functional ground pin requiring connection to ground for normal device operation. |
| 11 | Alert 1 | output | User-programmable push-pull alert output for detecting rising or falling temperatures exceeding user-specified threshold. |
| 12 | Alert 2 | output | User-programmable push-pull alert output for detecting rising or falling temperatures exceeding user-specified threshold. |
| 13 | GND | power_in | System electrical ground pin at same potential as pins 1, 3, 5, and 17. |
| 14 | Alert 3 | output | User-programmable push-pull alert output for detecting rising or falling temperatures exceeding user-specified threshold. |
| 15 | Alert 4 | output | User-programmable push-pull alert output for detecting rising or falling temperatures exceeding user-specified threshold. |
| 16 | ADDR | input | I2C slave address selection pin accepting voltage levels tied to VDD, GND, or resistive divider network to set 8 selectable address levels. |
| 17 | GND | power_in | System electrical ground pin at same potential as pins 1, 3, 5, and 13. |
| 18 | GND | power_in | Functional ground pin requiring connection to ground for normal device operation. |
| 19 | SCL | input | I2C serial clock input pin with timing reference for all serial communication generated by host or master controller. |
| 20 | SDA | bidirectional | Bidirectional I2C serial data line for transmitting data to/from host controller requiring pull-up resistor. |
| 21 | EP | power_in | Exposed thermal pad for heat dissipation and thermal conductivity from die to PCB, must be connected to ground for normal operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-20-EP(5x5) |
| Category | Data Acquisition |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
MCP9600-E - Footprint:
Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm - 3D model: QFN-20-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
mcp9600-e-etched.step/mcp9600-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp9600-e.step/mcp9600-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (50 pp, sha256
4bd4d5833b693a47, retrieved 2026-09-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).