3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP9509HT-E
Microchip Tech · Temperature Sensors · SOT-23-5
MCP9509HT-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SET | passive | External trip-temperature resistor (RSET) connects between SET and GND; the pin sources a constant ISET of about 5 µA to bias RSET and set the temperature threshold. |
| 2 | GND | power_in | System ground pin. |
| 3 | OUT | output | Open-drain output that triggers when temperature exceeds the programmed trip temperature and requires an external pull-up resistor. |
| 4 | HYS | input | Hysteresis select input: HYS = GND gives 2°C hysteresis, HYS = VDD gives 10°C hysteresis (typical). |
| 5 | VDD | power_in | Power supply pin, operating range 2.7V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Sensors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Sensor Accuracy 0°C to +125°C | TACY | -3.5 | 1 | 3.5 | °C | 0°C ≤ TA ≤ +125°C; Note 1 | 3 |
| Sensor Accuracy -20°C to +125°C | TACY | -4.5 | 1 | 4.5 | °C | -20°C ≤ TA ≤ +125°C; Note 1 | 3 |
| Operating Voltage | VDD | 2.7 | 5.5 | V | 3 | ||
| Operating Current (MCP9509) | IDD | 30 | 50 | µA | 3 | ||
| Hyste* input high threshold | VIH | 0 | V | VDD - 0.4 min (HYST input) | 3 | ||
| Hysteresis Input Low Threshold | VIL | 0.4 | V | HYST input | 3 | ||
| Output Voltage Low, MCP9509 | VOL | 0 | 0.3 | V | IOUT = 5 mA | 4 | |
| Specified Temperature Range | TA | -40 | 125 | °C | Note 1 | 4 | |
| Operating Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Supply Voltage | VDD | 6 | V | 3 | |||
| Voltage at all Input/Output pins | -0.3 | 6 | V | GND, 0.3V to 6.0V | 3 | ||
| Input/Output Current | 20 | mA | 3 | ||||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temp. with power applied | -40 | 125 | °C | 3 | |||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Latch-Up Current at each pin | -200 | 200 | mA | 25°C | 3 | ||
| Thermal Resistance, 5L-SOT23 | θJA | 220.7 | °C/Ω | 4 | |||
| Sensor Accuracy at +25°C, +45°C | TACY | 0.5 | °C | TA = +25°C, +45°C; Note 1 | 3 | ||
| Sensor Accuracy -40°C to +125°C | TACY | 2 | °C | -40°C ≤ TA ≤ +125°C; Note 1 | 3 | ||
| Trip Point Hysteresis | THYST | 2 | °C | HYST = GND | 3 | ||
| Trip Point Hysteresis | THYST | 10 | °C | HYST = VDD | 3 | ||
| Hysteresis Input (HYST) Leakage | ILeak | 1 | µA | 3 | |||
| Open-Drain Output Leakage | ILeak | 1 | µA | MCP9509/10 | 4 | ||
| Power Supply Rejection | PSR | 0.05 | °C/V | 4 | |||
| Thermal Response | tRES | 1.7 | s | Time to 63% (88°C). +25°C (Air) to +125°C (oil bath) | 4 |
CAD (KiCad official)
- Symbol:
MCP9509HT-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp9509ht-e-etched.step/mcp9509ht-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp9509ht-e.step/mcp9509ht-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (28 pp, sha256
097663648a099b9c, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).