main
Ray
Publish 0.1.0
9e55b83
MCP9501PT-125E
Microchip Tech · Temperature Sensors · SOT-23-5
MCP9501PT-125E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; may also be connected to system ground to provide better thermal conduction to the die. |
| 2 | GND | power_in | System ground pin that must be connected to ground. |
| 3 | HYST | input | Hysteresis selection input: HYST = GND gives +2°C (typical) hysteresis and HYST = VDD gives +10°C (typical), with VIH of 0.8 VDD min and VIL of 0.2 VDD max. |
| 4 | VDD | power_in | Power supply pin for the 2.7V to 5.5V operating range, with a 0.1 µF to 1 µF decoupling capacitor to GND recommended. |
| 5 | Output | output | MCP9501 hot-option open-drain, active-low temperature switch output that requires an external pull-up resistor, with 10 µA max leakage and VOL of 0.2 VDD max at 5 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Sensors |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Sensor Accuracy | -4 | 1 | 4 | °C | -15°C ≤ TA ≤ +75°C (Note 1) | 3 | |
| Sensor Accuracy | -6 | 2 | 6 | °C | -40°C ≤ TA ≤ +125°C | 3 | |
| Operating Voltage | VDD | 2.7 | 5.5 | V | 3 | ||
| Operating Current | IDD | 25 | 40 | µA | 3 | ||
| Hysteresis Select Input High | VIH | 0.8 | V | Min is 0.8 VDD | 3 | ||
| Hysteresis Select Input Low | VIL | 0.2 | V | Max is 0.2 VDD | 3 | ||
| Open-Drain Output Leakage | ILEAK | 0.1 | 10 | µA | MCP9501/3 | 3 | |
| Output Voltage Low | VOL | 0.2 | V | IOUT = 5 mA; Max is 0.2 VDD | 3 | ||
| Absolute Maximum Supply Voltage | VDD | 6 | V | 3 | |||
| Input/Output Current | 20 | mA | 3 | ||||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Ambient Temperature with Power Applied | -40 | 125 | °C | 3 | |||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| ESD Protection HBM | 4 | kV | All pins | 3 | |||
| ESD Protection MM | 400 | V | All pins | 3 | |||
| Latch-up Current at Each Pin | -200 | 200 | mA | +25°C | 3 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | Note 1 | 4 | |
| Operating Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Thermal Resistance | θJA | 220.7 | °C/W | 4 | |||
| Line Regulation | °C/V | 0.2 | °C/V | VDD = 2.7V to 5.5V | 3 | ||
| Trip Point Hysteresis | THYST | 2 | °C | HYST = GND | 3 | ||
| Trip Point Hysteresis | THYST | 10 | °C | HYST = VDD | 3 | ||
| Hysteresis Input Leakage | ILEAK | 0.1 | µA | 3 | |||
| Turn On Time | TON | 1 | ms | 3 | |||
| Response Time to Thermal Shock: SOT23-5 | TRES | 1.7 | s | Time to 63% (+89°C), +25°C (air) to +125°C (oil bath) | 3 |
CAD (KiCad official)
- Symbol:
MCP9501PT-125E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp9501pt-125e-etched.step/mcp9501pt-125e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp9501pt-125e.step/mcp9501pt-125e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (22 pp, sha256
4a4919121daa0fb1, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP9501PT-125E
**Microchip Tech** · Temperature Sensors · SOT-23-5
MCP9501PT-125E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; may also be connected to system ground to provide better thermal conduction to the die. |
| 2 | GND | power_in | System ground pin that must be connected to ground. |
| 3 | HYST | input | Hysteresis selection input: HYST = GND gives +2°C (typical) hysteresis and HYST = VDD gives +10°C (typical), with VIH of 0.8 VDD min and VIL of 0.2 VDD max. |
| 4 | VDD | power_in | Power supply pin for the 2.7V to 5.5V operating range, with a 0.1 µF to 1 µF decoupling capacitor to GND recommended. |
| 5 | Output | output | MCP9501 hot-option open-drain, active-low temperature switch output that requires an external pull-up resistor, with 10 µA max leakage and VOL of 0.2 VDD max at 5 mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Sensors |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Sensor Accuracy | | -4 | 1 | 4 | °C | -15°C ≤ TA ≤ +75°C (Note 1) | 3 |
| Sensor Accuracy | | -6 | 2 | 6 | °C | -40°C ≤ TA ≤ +125°C | 3 |
| Operating Voltage | VDD | 2.7 | | 5.5 | V | | 3 |
| Operating Current | IDD | | 25 | 40 | µA | | 3 |
| Hysteresis Select Input High | VIH | 0.8 | | | V | Min is 0.8 VDD | 3 |
| Hysteresis Select Input Low | VIL | | | 0.2 | V | Max is 0.2 VDD | 3 |
| Open-Drain Output Leakage | ILEAK | | 0.1 | 10 | µA | MCP9501/3 | 3 |
| Output Voltage Low | VOL | | | 0.2 | V | IOUT = 5 mA; Max is 0.2 VDD | 3 |
| Absolute Maximum Supply Voltage | VDD | | | 6 | V | | 3 |
| Input/Output Current | | | | 20 | mA | | 3 |
| Storage Temperature | | -65 | | 150 | °C | | 3 |
| Ambient Temperature with Power Applied | | -40 | | 125 | °C | | 3 |
| Junction Temperature | TJ | | | 150 | °C | | 3 |
| ESD Protection HBM | | | | 4 | kV | All pins | 3 |
| ESD Protection MM | | | | 400 | V | All pins | 3 |
| Latch-up Current at Each Pin | | -200 | | 200 | mA | +25°C | 3 |
| Specified Temperature Range | TA | -40 | | 125 | °C | Note 1 | 4 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 4 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 4 |
| Thermal Resistance | θJA | | 220.7 | | °C/W | | 4 |
| Line Regulation | °C/V | | 0.2 | | °C/V | VDD = 2.7V to 5.5V | 3 |
| Trip Point Hysteresis | THYST | | 2 | | °C | HYST = GND | 3 |
| Trip Point Hysteresis | THYST | | 10 | | °C | HYST = VDD | 3 |
| Hysteresis Input Leakage | ILEAK | | 0.1 | | µA | | 3 |
| Turn On Time | TON | | 1 | | ms | | 3 |
| Response Time to Thermal Shock: SOT23-5 | TRES | | 1.7 | | s | Time to 63% (+89°C), +25°C (air) to +125°C (oil bath) | 3 |
## CAD (KiCad official)
- Symbol: `MCP9501PT-125E`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `mcp9501pt-125e-etched.step` / `mcp9501pt-125e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp9501pt-125e.step` / `mcp9501pt-125e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp9501pt-125e-datasheet.pdf) (22 pp, sha256 `4a4919121daa0fb1`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp9501pt-125e-datasheet.pdf)