main
History Download
Ray Publish 0.1.0 67f2ee3

MCP795W22-I

Microchip Tech · Real-time Clocks (RTC) · TSSOP-14

MCP795W22-I from Microchip Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 X1 input Quartz crystal input for a 32.768 kHz crystal (optimized for 6-9 pF load), also the external clock input when EXTOSC is used.
2 X2 output Quartz crystal output for a 32.768 kHz crystal; left floating when an external clock is applied to X1.
3 VBAT power_in Battery backup supply input maintaining RTCC and SRAM during VCC loss, with a backup range of 1.3V to 3.6V; connect to VSS if unused and apply VCC before VBAT.
4 WDO output Open-drain Watchdog Timer output (and optionally alarm output) that requires a pull-up to VCC, typically 10 k, and may be left floating if unused.
5 IRQ output Open-drain interrupt output for the event detect modules and optionally alarms, requiring a pull-up to VCC or VBAT, typically 10 k.
6 CS input Active-low chip select that selects the device; SO enters high-impedance when deselected and a high-to-low transition is required after power-up.
7 VSS power_in Ground reference for the device.
8 SO output Serial data output that shifts data out after the falling edge of SCK and is high-impedance when CS is high.
9 SI input Serial data input that receives instructions, addresses and data, latched on the rising edge of SCK.
10 SCK input Serial clock input synchronizing SPI communication; SI is latched on the rising edge and SO updates after the falling edge.
11 EVHS input Input for the high-speed event detect module, to be tied to VCC or VSS if the module is unused.
12 EVLS input Input for the low-speed event detect module (switch debouncing), to be tied to VCC or VSS if the module is unused.
13 CLKOUT output Square wave clock output with selectable frequency; may be left floating if not used.
14 VCC power_in Primary power supply with an operating voltage range of 1.8V to 3.6V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TSSOP-14
Category RTC/Clock Chip
Pins 14

CAD (KiCad official)

  • Symbol: MCP795W22-I
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: mcp795w22-i-etched.step / mcp795w22-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp795w22-i.step / mcp795w22-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (68 pp, sha256 faa1ae568a047d17, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF