← Commit history
Publish 0.1.1
4 files changed
+442−11
mcp7940nt-i-sn-hero.glbadded⋯ 1 unchanged line ⋯
mcp7940nt-i-sn-hero.overlay.jsonadded+260@@ -0,0 +1,260 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "MCP7940NT-I/SN",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 6.9,+ "dash_mm": 0.1725,+ "gap_mm": 0.1035,+ "pad_stroke_mm": 0.0414+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -2.11,+ 2.11+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "mcp7940nt-i.glb",+ "glb_sha256": "f10b15a10c98e84fd5223191d2bfb66554fa8950956609c321bb34628d5e18cd",+ "footprint": "mcp7940nt-i.kicad_mod",+ "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+ "pins": "page.json component.pins",+ "pins_sha256": "a76d6ecdc83038ddb00337b6740963d383319a478c906ced92675c76dc8f4087"+ },+ "generator": "adom-wiki 1.8.24 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "X1",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "X2",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "VBAT",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "VSS",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "SDA",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "SCL",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "MFP",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "VCC",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+170−3@@ -1,6 +1,6 @@ { "slug": "mcp7940nt-i-sn",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Microchip Real-time Clocks (RTC), SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,6 +25,173 @@ "docs/mcp7940nt-i-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "pads.json"- ]+ "mcp7940nt-i-etched.step",+ "pads.json",+ "mcp7940nt-i-etched.glb",+ "mcp7940nt-i-sn-hero.glb",+ "mcp7940nt-i-sn-hero.overlay.json"+ ],+ "component": {+ "mpn": "MCP7940NT-I/SN",+ "manufacturer": "Microchip",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "RTC",+ "subcategory": "Real-time Clocks (RTC)",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/5093447976d64b9ab2cb1808413f6a3f.pdf",+ "parts": {+ "symbol": "mcp7940nt-i.kicad_sym",+ "footprint": "mcp7940nt-i.kicad_mod",+ "model_3d": "mcp7940nt-i-sn-hero.glb",+ "model_3d_plain": "mcp7940nt-i.glb",+ "model_3d_step": "mcp7940nt-i-etched.step",+ "model_3d_step_plain": "mcp7940nt-i.step",+ "lbr": "mcp7940nt-i.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "X1",+ "type": "input",+ "description": "Quartz crystal input / external oscillator input. Connects to one terminal of the 32.768 kHz tuning-fork crystal (optimized for 6-9 pF load capacitance) with its external load capacitor to VSS. Also usable as the external clock input when driving the device from an external oscillator."+ },+ {+ "number": "2",+ "name": "X2",+ "type": "output",+ "description": "Quartz crystal output. Connects to the second terminal of the 32.768 kHz crystal with its external load capacitor to VSS. Leave floating when using an external oscillator driving X1."+ },+ {+ "number": "3",+ "name": "VBAT",+ "type": "power_in",+ "description": "Battery backup supply input, 1.3 V to 5.5 V. Maintains RTCC and SRAM when VCC is lost; typical timekeeping backup current is 925 nA at 3.0 V. Tie to VSS if the battery backup feature is not used."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Device ground (0 V) reference for VCC and VBAT rails and all logic signals."+ },+ {+ "number": "5",+ "name": "SDA",+ "type": "bidirectional",+ "description": "Bidirectional I2C serial data (open-drain). Requires an external pull-up resistor to VCC (typ. 10 kΩ at 100 kHz or 2 kΩ at 400 kHz). Data may change only while SCL is low; changes while SCL is high signal Start/Stop conditions."+ },+ {+ "number": "6",+ "name": "SCL",+ "type": "input",+ "description": "I2C serial clock input from the bus master, used to synchronize data transfer to/from the device. Supports clock rates up to 400 kHz. Schmitt-trigger input with 50 ns spike suppression; requires an external pull-up to VCC."+ },+ {+ "number": "7",+ "name": "MFP",+ "type": "output",+ "description": "Multifunction output (open-drain). Configurable as alarm output on an alarm match, as a selectable-frequency square-wave output, or as a general-purpose output driven by the OUT bit in the CONTROL register. Requires an external pull-up resistor to VCC (typ. 10 kΩ); leave floating if unused. VOL = 0.40 V at IOL = 3.0 mA (VCC = 4.5 V)."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_in",+ "description": "Primary power supply, 1.8 V to 5.5 V. Typical timekeeping current 1.2 uA at 3.3 V; SRAM/RTCC register operating current is 300 uA (read) / 400 uA (write) at VCC = 5.5 V, SCL = 400 kHz. Power-fail switchover to VBAT occurs at VTRIP (1.3-1.7 V)."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/5093447976d64b9ab2cb1808413f6a3f.pdf",+ "pages": 56,+ "sha256": "4aafe310fbafe313",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "pin1": {+ "pad": "1",+ "at": [+ -2.475,+ -1.905+ ],+ "corner": "top-left",+ "source": "silk-marker",+ "derived_from": "SOIC-8_3.9x4.9mm_P1.27mm@sha256:074ecb2092b24fa4",+ "mark": "drawn"+ },+ "models_3d": [+ {+ "file": "mcp7940nt-i.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "mcp7940nt-i-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "63c924e03b57bde06b2a7ca016fe77020ca890f04bde795eac755df6eb17295c",+ "checked": "2026-11-03",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ],+ "family": {+ "base": "MCP7940NT-I",+ "siblings": [+ "MCP7940NT-I/MS"+ ],+ "old_slug": "mcp7940nt-i",+ "note": "renamed from the cut-base slug to the part it was built from (slug collision split, 2026-11-11)"+ }+ },+ "title": "MCP7940NT-I/SN",+ "brief": "Microchip Real-time Clocks (RTC), SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "Microchip",+ "Package": "SOIC-8",+ "Category": "RTC",+ "Pins": "9"+ }+ },+ "discovery_triggers": [+ "mcp7940nt-i"+ ],+ "discovery_pitch": "MCP7940NT-I (Microchip) component page with datasheet-verified CAD.",+ "visibility": "public" }
page.json+12−8@@ -4,7 +4,7 @@ "slug": "mcp7940nt-i-sn", "title": "MCP7940NT-I/SN", "brief": "Microchip Real-time Clocks (RTC), SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -22,7 +22,7 @@ "parts": { "symbol": "mcp7940nt-i.kicad_sym", "footprint": "mcp7940nt-i.kicad_mod",- "model_3d": "mcp7940nt-i-etched.glb",+ "model_3d": "mcp7940nt-i-sn-hero.glb", "model_3d_plain": "mcp7940nt-i.glb", "model_3d_step": "mcp7940nt-i-etched.step", "model_3d_step_plain": "mcp7940nt-i.step",@@ -198,11 +198,13 @@ "docs/mcp7940nt-i-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "mcp7940nt-i-etched.step"+ "mcp7940nt-i-etched.step",+ "pads.json",+ "mcp7940nt-i-etched.glb",+ "mcp7940nt-i-sn-hero.glb",+ "mcp7940nt-i-sn-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "variants": [ { "mpn": "MCP7940NT-IMNY",@@ -229,5 +231,7 @@ "kind": "packaging" } ],- "updated_at": "2026-09-25T01:26:21.987Z"-}+ "updated_at": "2026-09-25T01:26:21.987Z",+ "description": "Microchip Real-time Clocks (RTC), SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}