main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mcp7940n-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers mcp7940n-i: viewers · Ray
mcp7940n-i-etched.fit.json mcp7940n-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp7940n-i-etched.glb mcp7940n-i: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
mcp7940n-i-etched.step mcp7940n-i: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
mcp7940n-i-sn-hero.glb Publish 0.1.1 · Ray
mcp7940n-i-sn-hero.overlay.json Publish 0.1.1 · Ray
mcp7940n-i.glb Publish 0.1.0 · Ray
mcp7940n-i.kicad_mod Publish 0.1.0 · Ray
mcp7940n-i.kicad_sym Publish 0.1.0 · Ray
mcp7940n-i.lbr mcp7940n-i-sn: renamed from mcp7940n-i, the part it was built from (MCP7940N-I/SN); family listed · Ray
mcp7940n-i.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md mcp7940n-i-sn: renamed from mcp7940n-i, the part it was built from (MCP7940N-I/SN); family listed · Ray

MCP7940N-I/SN

Microchip Tech · Real Time Clocks · SOIC-8

MCP7940N-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 X1 input Quartz crystal input / external oscillator input. Connects to one terminal of a 32.768 kHz tuning-fork crystal (optimized for 6-9 pF load caps) or accepts an external clock when the device is configured for external oscillator mode.
2 X2 output Quartz crystal output. Drives the second terminal of the 32.768 kHz crystal (with external load capacitor). Unused when driving X1 from an external clock source.
3 VBAT power_in Battery backup supply input (1.3 V to 5.5 V). Maintains RTCC and SRAM operation when VCC is below the power-fail trip voltage (VTRIP typ. 1.5 V). Tie to VSS if battery backup is not used.
4 VSS power_in Ground / device negative supply reference (0 V).
5 SDA bidirectional I2C bidirectional serial data. Open-drain terminal; requires an external pull-up to VCC (typ. 10 kΩ at 100 kHz, 2 kΩ at 400 kHz). Data must be stable while SCL is high.
6 SCL input I2C serial clock input. Synchronizes data transfer to and from the device; supports up to 400 kHz.
7 MFP output Multifunction output pin. Configurable as an alarm-match output, a selectable-frequency square-wave output, or a general-purpose output driven by the CONTROL register OUT bit. Open-drain; requires an external pull-up to VCC (typ. 10 kΩ). May be left floating if unused.
8 VCC power_in Primary power supply (1.8 V to 5.5 V). Absolute maximum 6.5 V. Typical timekeeping current 1.2 µA at 3.3 V; SRAM/RTCC operating current up to 400 µA at 400 kHz SCL.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Clock/Timing
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MCP7940N-II/SN
  • MCP7940N-II/MS
  • MCP7940N-II/ST
  • MCP7940N-II/P
  • MCP7940N-II/MNY

CAD (KiCad official)

  • Symbol: MCP7940N-I
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mcp7940n-i-etched.step / mcp7940n-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp7940n-i.step / mcp7940n-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (56 pp, sha256 4aafe310fbafe313, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP7940N-I/SN. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP7940N-I/P