Generated by kicad-footprint-generator · KiCad file format 20260206
MCP7940N-E/SN
Microchip Tech · Real-time Clocks (RTC) · SOIC-8
MCP7940N-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | Quartz crystal input for the 32.768 kHz crystal (6-9 pF load), also serves as the external clock input when configured for an external oscillator. |
| 2 | X2 | output | Quartz crystal output for the 32.768 kHz crystal; leave floating when an external clock is applied to X1. |
| 3 | VBAT | power_in | Backup supply input (1.3V to 5.5V) that maintains the RTCC and SRAM registers when VCC is unavailable; connect to VSS if battery backup is not used. |
| 4 | VSS | power_in | Ground. |
| 5 | SDA | bidirectional | Open-drain bidirectional I2C serial data pin for addresses and data, requiring a pull-up resistor to VCC (typically 10 kΩ for 100 kHz, 2 kΩ for 400 kHz). |
| 6 | SCL | input | I2C serial clock input used to synchronize data transfer to and from the device. |
| 7 | MFP | output | Open-drain multifunction output for alarm, square wave or general purpose output (OUT bit), needing a pull-up resistor to VCC (typically 10 kΩ) and may be left floating if unused. |
| 8 | VCC | power_in | Primary power supply with operating range of 1.8V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | RTC/Clock Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-Level Input Voltage | VIH | 0.7 | VCC | 3 | |||
| Low-Level Input Voltage | VIL | 0.3 | VCC | VCC ≥ 2.5V | 3 | ||
| Low-Level Input Voltage | VIL | 0.2 | VCC | VCC < 2.5V | 3 | ||
| Hysteresis of Schmitt Trigger Inputs (SDA, SCL) | VHYS | 0.05 | VCC | Note 2 | 3 | ||
| Low-Level Output Voltage (MFP, SDA) | VOL | 0.4 | V | IOL = 3.0 mA @ VCC = 4.5V; IOL = 2.1 mA @ VCC = 2.5V | 3 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 3 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VOUT = VSS or VCC | 3 | |
| Pin Capacitance (SDA, SCL, MFP) | CIN, COUT | 10 | pF | VCC = 5.0V (Note 2), TA = +25°C, f = 1 MHz | 3 | ||
| SRAM/RTCC Register Operating Current (read) | ICCREAD | 300 | µA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| SRAM/RTCC Register Operating Current (write) | ICCWRITE | 400 | µA | VCC = 5.5V, SCL = 400 kHz | 3 | ||
| VCC Data-Retention Current (oscillator off) | ICCDAT | 5 | µA | SCL, SDA, VCC = 5.5V (E-temp) | 3 | ||
| Power-fail Switchover Voltage | VTRIP | 1.3 | 1.5 | 1.7 | V | 3 | |
| Backup Supply Voltage Range | VBAT | 1.3 | 5.5 | V | Note 2 | 3 | |
| Timekeeping Backup Current | IBATT | 850 | nA | VBAT = 1.3V, VCC = VSS (Note 2) | 4 | ||
| Timekeeping Backup Current | IBATT | 925 | 1200 | nA | VBAT = 3.0V, VCC = VSS (Note 2) | 4 | |
| Timekeeping Backup Current | IBATT | 9000 | nA | VBAT = 5.5V, VCC = VSS (Note 2) | 4 | ||
| VBAT Data Retention Current (oscillator off) | IBATDAT | 750 | nA | VBAT = 3.6V, VCC = VSS | 4 | ||
| Timekeeping Current | ICCT | 1.2 | µA | VCC = 3.3V (Note 2) | 3 | ||
| Oscillator Pin Capacitance (X1, X2) | COSC | 3 | pF | Note 2 | 3 | ||
| Clock Frequency | FCLK | 100 | kHz | 1.8V ≤ VCC < 2.5V | 5 | ||
| Clock Frequency | FCLK | 400 | kHz | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Clock High Time | THIGH | 4000 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Clock High Time | THIGH | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Clock Low Time | TLOW | 4700 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Clock Low Time | TLOW | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| SDA and SCL Rise Time | TR | 1000 | ns | 1.8V ≤ VCC < 2.5V (Note 1) | 5 | ||
| SDA and SCL Rise Time | TR | 300 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 1) | 5 | ||
| SDA and SCL Fall Time | TF | 1000 | ns | 1.8V ≤ VCC < 2.5V (Note 1) | 5 | ||
| SDA and SCL Fall Time | TF | 300 | ns | 2.5V ≤ VCC ≤ 5.5V (Note 1) | 5 | ||
| Start Condition Hold Time | THD:STA | 4000 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Start Condition Hold Time | THD:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Start Condition Setup Time | TSU:STA | 4700 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Start Condition Setup Time | TSU:STA | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Data Input Hold Time | THD:DAT | 0 | ns | Note 2 | 5 | ||
| Data Input Setup Time | TSU:DAT | 250 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Data Input Setup Time | TSU:DAT | 100 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Stop Condition Setup Time | TSU:STO | 4000 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Stop Condition Setup Time | TSU:STO | 600 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Output Valid From Clock | TAA | 3500 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Output Valid From Clock | TAA | 900 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Bus Free Time | TBUF | 4700 | ns | 1.8V ≤ VCC < 2.5V | 5 | ||
| Bus Free Time | TBUF | 1300 | ns | 2.5V ≤ VCC ≤ 5.5V | 5 | ||
| Input Filter Spike Suppression (SDA and SCL) | TSP | 50 | ns | Note 1 | 5 | ||
| Oscillator Timeout Period | TOSF | 1 | ms | Note 1 | 5 | ||
| Oscillator Frequency | FOSC | 32.768 | kHz | 5 | |||
| Supply Voltage | VCC | 6.5 | V | 3 | |||
| All inputs and outputs (except SDA and SCL) w.r.t. VSS | -0.6 | V | -0.6V to VCC +1.0V | 3 | |||
| SDA and SCL w.r.t. VSS | -0.6 | 6.5 | V | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| ESD protection on all pins | 4 | kV | 3 | ||||
| Operating Supply Voltage | VCC | 1.8 | 5.5 | V | Extended (E) | 3 | |
| Operating Temperature | TA | -40 | 125 | °C | Extended (E) | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 44 |
CAD (KiCad official)
- Symbol:
MCP7940N-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp7940n-e-etched.step/mcp7940n-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp7940n-e.step/mcp7940n-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (58 pp, sha256
92385d740e31ab2b, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is MCP7940N-E/SN. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP7940N-E/MS