Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP73871-3CCI

Microchip Tech · Battery Management ICs · QFN-20(4x4)

MCP73871-3CCI from Microchip Tech, in a QFN-20(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out System output terminal that powers the system load while the battery charges independently; bypass to VSS with a minimum of 4.7 µF.
2 VPCC input Voltage proportional charge control input; supply 1.23V or greater to enable, or connect to IN to disable the feature.
3 SEL input Input type selection: low for USB port, high for AC-DC adapter.
4 PROG2 input USB port input current limit selection when SEL = Low (Low = 100 mA, High = 500 mA).
5 THERM bidirectional Thermistor monitoring input and bias current output for battery cell temperature monitoring.
6 PG output Open-drain power good status output, low when input is above the UVLO threshold and greater than the battery voltage.
7 STAT2 output Open-drain charge status output 2 for driving an LED or a host microcontroller.
8 STAT1/LBO output Open-drain charge status output 1; also low battery output indicator when VBAT > VIN.
9 TE input Timer enable; enables the safety timer when active-low.
10 VSS power_in Battery management 0V reference; connect to the negative terminal of the battery, system load and input supply.
11 VSS power_in Battery management 0V reference; connect to the negative terminal of the battery, system load and input supply.
12 PROG3 bidirectional Termination set point for both AC-DC adapter and USB port.
13 PROG1 bidirectional Fast charge current regulation setting with SEL = high via a resistor to VSS; also preconditioning set point for both USB port and AC-DC adapter.
14 VBAT power_in Battery positive input and output connection; bypass to VSS with a minimum of 4.7 µF.
15 VBAT power_in Battery positive input and output connection; bypass to VSS with a minimum of 4.7 µF.
16 VBAT_SENSE bidirectional Battery voltage sense; connect to the positive terminal of the battery, where the internal sense regulates the final voltage to VREG.
17 CE input Device charge enable; enabled when CE is high.
18 IN power_in Power supply input, recommended VREG + 0.3V to 6V; bypass to VSS with a minimum of 4.7 µF.
19 IN power_in Power supply input, recommended VREG + 0.3V to 6V; bypass to VSS with a minimum of 4.7 µF.
20 OUT power_out System output terminal that powers the system load while the battery charges independently; bypass to VSS with a minimum of 4.7 µF.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-20(4x4)
Category Power Supply Chip
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN 7 V 4
Storage temperature -65 150 °C 4
ESD HBM 4 kV 1.5 k in series with 100 pF 4
ESD Machine Model 300 V 200 pF, no series resistance 4
Supply Voltage VIN 6 V min is VREG + 0.3V 4
Supply Current, charging ISS 2500 3750 µA Charging 4
Supply Current, charge complete ISS 260 350 µA Charge Complete 4
Supply Current, standby ISS 180 300 µA Standby 4
Supply Current, shutdown ISS 28 50 µA Shutdown (VDD < VBAT, 100 mV or VDD < VSTOP) 4
Regulated Charge Voltage Tolerance VRTOL -0.5 0.5 % TA = +25°C 4
Regulated Charge Voltage Tolerance VRTOL -0.75 0.75 % TA = -5°C to +55°C 4
Line Regulation /ΔVBAT/VBAT)/ΔVDD/ 0.08 0.2 %/V VDD = [VREG(typical) + 1V] to 6V, IOUT = 10 mA 4
Load Regulation ΔVBAT/VBAT 0.08 0.18 % IOUT = 10 mA to 150 mA, VDD = [VREG(typical) + 1V] 4
AC-Adapter Fast Charge Current IREG 90 100 110 mA PROG1 = 10 k, TA = -5°C to +55°C, SEL = High 5
AC-Adapter Fast Charge Current IREG 900 1000 1100 mA PROG1 = 1 k, TA = -5°C to +55°C, SEL = High 5
USB Fast Charge Current IREG 80 90 100 mA PROG2 = Low, SEL = Low, (Note 2), TA = -5°C to +55°C 5
USB Fast Charge Current IREG 400 450 500 mA PROG2 = High, SEL = Low, (Note 2), TA = -5°C to +55°C 5
USB-Port Supply Current Limit ILIMIT_USB 80 90 100 mA PROG2 = Low, SEL = Low, TA = -5°C to +55°C 5
USB-Port Supply Current Limit ILIMIT_USB 400 450 500 mA PROG2 = High, SEL = Low, TA = -5°C to +55°C 5
AC-DC Adapter Current Limit ILIMIT_AC 1500 1650 1800 mA SEL = High, TA = -5°C to +55°C 5
VPCC Input Threshold Tolerance VRTOL -3 3 % 5
VPCC Input Leakage Current ILK 0.01 1 µA VVPCC = VDD 5
Precondition Current Ratio IPREG/IREG 7.5 10 12.5 % PROG1 = 1.0 k to 10 k, TA = -5°C to +55°C 5
Precondition Current Threshold Ratio VPTH/VREG 69 72 75 % VBAT Low-to-High 5
Charge Termination Current ITERM 75 100 125 mA PROG3 = 10 k, TA = -5°C to +55°C 5
Charge Termination Current ITERM 7.5 10 12.5 mA PROG3 = 100 k, TA = -5°C to +55°C 5
Output Reverse Leakage Current IDISCHARGE 30 40 µA Shutdown (VBAT < VDD < VUVLO) 6
Output Reverse Leakage Current IDISCHARGE -6 -13 µA Charge Complete 6
Status Sink Current ISINK 16 35 mA 6
Status Low Output Voltage VOL 0.4 1 V ISINK = 4 mA 6
Status Input Leakage Current ILK 0.01 1 µA High Impedance, VDD on pin 6
PROG1 Charge Impedance Range RPROG 1 20 kΩ 6
PROG3 Termination Impedance Range RPROG 5 100 kΩ 6
PROG2 Input High Voltage VIH 1.8 V 6
PROG2 Input Low Voltage VIL 0.8 V 6
TE Input High Voltage VIH 1.8 V Note 1 6
TE Input Low Voltage VIL 0.8 V Note 1 6
CE Input High Voltage VIH 1.8 V 7
CE Input Low Voltage VIL 0.8 V 7
SEL Input High Voltage VIH 1.8 V 7
SEL Input Low Voltage VIL 0.8 V 7
Thermistor Current Source ITHERM 47 50 53 µA 2 k < RTHERM < 50 k 7
Thermistor Upper Trip Threshold VT1 1.2 1.24 1.26 V VT1 Low-to-High 7
Thermistor Lower Trip Threshold VT2 0.23 0.25 0.27 V VT2 High-to-Low 7
UVLO Start Delay tSTART 5 ms VDD Low-to-High 8
Transition Time Out of Precondition tDELAY 10 ms VBAT < VPTH to VBAT > VPTH 8
Current Rise Time Out of Precondition tRISE 10 ms IOUT Rising to 90% of IREG 8
Precondition Comparator Filter Time tPRECON 0.4 1.3 3.2 ms Average VBAT Rise/Fall 8
Termination Comparator Filter Time tTERM 0.4 1.3 3.2 ms Average IOUT Falling 8
Charge Comparator Filter Time tCHARGE 0.4 1.3 3.2 ms Average VBAT Falling 8
Thermistor Comparator Filter Time tTHERM 0.4 1.3 3.2 ms Average THERM Rise/Fall 8
Status Output Turn-off tOFF 500 µs ISINK = 1 mA to 0 mA 8
Status Output Turn-on tON 500 µs ISINK = 0 mA to 1 mA 8
Specified Temperature Range TA -40 85 °C 8
Operating Temperature Range TJ -40 125 °C 8
Storage Temperature Range TA -65 150 °C 8
Thermal Resistance, 20LD-QFN 4x4, junction to ambient θJA 50 °C/W 4-Layer JC51-7 Standard Board, Natural Convection 8
UVLO Hysteresis VHYS 90 mV 4
Thermal Shutdown Die Temperature TSD 150 °C 7

CAD (KiCad official)

  • Symbol: MCP73871-3CCI
  • Footprint: Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
  • 3D model: QFN-20(4x4) (KiCad packages3D, STEP)
  • 3D model files: mcp73871-3cci-etched.step / mcp73871-3cci-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp73871-3cci.step / mcp73871-3cci.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (36 pp, sha256 56654f56a8ac83ad, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF