main
Ray
Publish 0.1.0
2a03a63
MCP73842-820I
Microchip Tech · Battery Management ICs · MSOP-10
MCP73842-820I from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE | input | Charge current sense input; a sense resistor between VDD and the external pass transistor sets fast charge current (220 mΩ gives typically 500 mA). |
| 2 | VDD | power_in | Battery management input supply; [VREG(Typ) + 0.3V] to 12V recommended, bypass to VSS with a minimum of 4.7 µF. |
| 3 | STAT1 | output | Current-limited open-drain charge status output for direct LED drive, or with a pull-up resistor for a host microcontroller. |
| 4 | EN | input | Logic enable input to force charge termination, initiate charge, clear faults or disable automatic recharge. |
| 5 | THREF | output | Cell temperature sensor bias; voltage reference to bias the external thermistor for continuous cell temperature monitoring and prequalification. |
| 6 | THERM | input | Cell temperature sensor input for an external thermistor; applying 0.85V disables temperature sensing. |
| 7 | TIMER | passive | Timer set pin; all safety timers are scaled by CTIMER/0.1 µF. |
| 8 | VSS | power_in | Battery management 0V reference; connect to negative terminal of battery. |
| 9 | VBAT | power_in | Battery voltage sense input connected to battery positive terminal, bypass to VSS with a minimum of 4.7 µF; regulates final voltage to VREG. |
| 10 | DRV | output | Direct output drive of an external P-channel MOSFET for current and voltage regulation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-10 |
| Category | Power Supply Chip |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 8.7 | 12 | V | MCP73842, MCP73844 | 3 | |
| Supply Current Disabled | ISS | 0.25 | 4 | µA | Disabled | 3 | |
| Supply Current Operating | ISS | 0.75 | 4 | mA | Operating, VDD =VREG(Typ)+1V | 3 | |
| UVLO Start Threshold | VSTART | 8.45 | 8.65 | 8.9 | V | VDD Low-to-High, MCP73842, MCP73844 | 3 |
| UVLO Stop Threshold | VSTOP | 8.4 | 8.6 | 8.85 | V | VDD High-to-Low, MCP73842, MCP73844 | 3 |
| Regulated Output Voltage | VREG | 8.159 | 8.2 | 8.241 | V | VDD = [VREG(Typ)+1V], IOUT = 10 mA, TA = -5°C to +55°C | 3 |
| Line Regulation | /ΔVBAT/VBAT//ΔVDD | 0.025 | 0.25 | %/V | VDD = [VREG(Typ)+1V] to 12V, IOUT = 10 mA | 3 | |
| Load Regulation | /ΔVBAT//VBAT | 0.01 | 0.25 | % | IOUT = 10 mA to 150 mA, VDD = [VREG(Typ)+1V] | 3 | |
| Supply Ripple Attenuation 100 Hz | PSRR | -58 | dB | IOUT = 10 mA, 100 Hz | 3 | ||
| Supply Ripple Attenuation 1 kHz | PSRR | -42 | dB | IOUT = 10 mA, 1 kHz | 3 | ||
| Supply Ripple Attenuation 10 kHz | PSRR | -30 | dB | IOUT = 10 mA, 10 kHz | 3 | ||
| Output Reverse Leakage Current | IDISCHARGE | 0.4 | 1 | µA | VDD Floating, VBAT = VREG(Typ) | 3 | |
| Fast Charge Current Regulation Threshold | VFCS | 100 | 110 | 120 | mV | VDD, VSENSE, TA = -5°C to +55°C | 3 |
| Precondition Current Regulation Threshold | VPCS | 5 | 10 | 15 | mV | VDD, VSENSE, TA = -5°C to +55°C | 4 |
| Precondition Threshold Voltage | VPTH | 5.4 | 5.6 | 5.8 | V | VBAT Low-to-High, MCP73842-8.2 | 4 |
| Charge Termination Threshold | VTCS | 4 | 7 | 10 | mV | VDD, VSENSE, TA = -5°C to +55°C | 4 |
| Recharge Threshold Voltage | VRTH | -600 | -400 | -200 | mV | VREG offset, VBAT High-to-Low, MCP73842 | 4 |
| Gate Drive Minimum Voltage | VDRVMIN | 1 | V | VDD = 4.5V | 4 | ||
| Gate - Source Clamp Voltage | VGS | -7 | -4.5 | V | VDD = 12.0V | 4 | |
| Thermistor Reference Output Voltage | VTHREF | 2.475 | 2.55 | 2.625 | V | TA = +25°C, VDD = VREG(Typ)+1V, ITHREF = 0 mA | 4 |
| Thermistor Reference Source Current | ITHREF | 200 | µA | 4 | |||
| Thermistor Reference Line Regulation | ΔVTHREF/VTHREF)//ΔVDD | 0.1 | 0.25 | %/V | VDD=[VREG(Typ)+1V] to 12V | 4 | |
| Thermistor Reference Load Regulation | ΔVTHREF/VTHREF | 0.01 | 0.1 | % | ITHREF = 0 mA to 0.20 mA | 4 | |
| Upper Trip Threshold | VT1 | 1.18 | 1.25 | 1.32 | V | 4 | |
| Lower Trip Threshold | VT2 | 0.59 | 0.62 | 0.66 | V | 4 | |
| Thermistor Input Bias Current | /IBIAS/ | 2 | µA | 4 | |||
| Status Sink Current | ISINK | 4 | 7 | 12 | mA | 4 | |
| Status Low Output Voltage | VOL | 200 | 400 | mV | ISINK = 1 mA | 4 | |
| Status Input Leakage Current | ILK | 0.01 | 1 | µA | ISINK = 0 mA, VSTAT1 = 12V | 4 | |
| Enable Input High-Voltage Level | VIH | 1.4 | V | 5 | |||
| Enable Input Low-Voltage Level | VIL | 0.8 | V | 5 | |||
| Enable Input Leakage Current | ILK | 0.01 | 1 | µA | VENABLE = 12V | 5 | |
| UVLO Start Delay | tSTART | 5 | msec | VDD Low-to-High | 5 | ||
| Transition Time Out of Preconditioning | tDELAY | 1 | msec | VBAT< VPTH to VBAT > VPTH | 5 | ||
| Current Rise Time Out of Preconditioning | tRISE | 1 | msec | IOUT Rising to 90% of IREG | 5 | ||
| Fast Charge Safety Timer Period | tFAST | 1.1 | 1.5 | 1.9 | Hours | CTIMER = 0.1 µF | 5 |
| Preconditioning Charge Safety Timer Period | tPRECON | 45 | 60 | 75 | Minutes | CTIMER = 0.1 µF | 5 |
| Elapsed Time Termination Period | tTERM | 2.2 | 3 | 3.8 | Hours | CTIMER = 0.1 µF | 5 |
| Status Output turn-off | tOFF | 200 | µsec | ISINK = 10 mA to 0 mA | 5 | ||
| Status Output turn-on | tON | 200 | µsec | ISINK = 0 mA to 10 mA | 5 | ||
| Input/Output Voltage | -0.3 | V | All inputs and outputs w.r.t. VSS, max (VDD+0.3)V | 3 | |||
| Current at DRV Pin | -4 | 4 | mA | 3 | |||
| Current at STAT1 Pin | -30 | 30 | mA | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| ESD HBM | 2 | kV | Human Body Model (1.5 kΩ in Series with 100 pF) | 3 | |||
| ESD MM | 200 | V | Machine Model (200 pF, No Series Resistance) | 3 | |||
| Specified Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Thermal Resistance, MSOP-10 | θJA | 113 | °C/W | 4-Layer JC51-7 Standard Board, Natural Convection | 5 | ||
| Thermistor Reference Temperature Coefficient | TCTHREF | 50 | ppm/°C | 4 | |||
| Gate Drive Current Sink | IDRV | 2 | mA | Sink, CV Mode | 4 |
CAD (KiCad official)
- Symbol:
MCP73842-820I - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
mcp73842-820i-etched.step/mcp73842-820i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp73842-820i.step/mcp73842-820i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (26 pp, sha256
da2a0f52e1435a78, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP73842-820I
**Microchip Tech** · Battery Management ICs · MSOP-10
MCP73842-820I from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE | input | Charge current sense input; a sense resistor between VDD and the external pass transistor sets fast charge current (220 mΩ gives typically 500 mA). |
| 2 | VDD | power_in | Battery management input supply; [VREG(Typ) + 0.3V] to 12V recommended, bypass to VSS with a minimum of 4.7 µF. |
| 3 | STAT1 | output | Current-limited open-drain charge status output for direct LED drive, or with a pull-up resistor for a host microcontroller. |
| 4 | EN | input | Logic enable input to force charge termination, initiate charge, clear faults or disable automatic recharge. |
| 5 | THREF | output | Cell temperature sensor bias; voltage reference to bias the external thermistor for continuous cell temperature monitoring and prequalification. |
| 6 | THERM | input | Cell temperature sensor input for an external thermistor; applying 0.85V disables temperature sensing. |
| 7 | TIMER | passive | Timer set pin; all safety timers are scaled by CTIMER/0.1 µF. |
| 8 | VSS | power_in | Battery management 0V reference; connect to negative terminal of battery. |
| 9 | VBAT | power_in | Battery voltage sense input connected to battery positive terminal, bypass to VSS with a minimum of 4.7 µF; regulates final voltage to VREG. |
| 10 | DRV | output | Direct output drive of an external P-channel MOSFET for current and voltage regulation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-10 |
| Category | Power Supply Chip |
| Pins | 10 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 8.7 | | 12 | V | MCP73842, MCP73844 | 3 |
| Supply Current Disabled | ISS | | 0.25 | 4 | µA | Disabled | 3 |
| Supply Current Operating | ISS | | 0.75 | 4 | mA | Operating, VDD =VREG(Typ)+1V | 3 |
| UVLO Start Threshold | VSTART | 8.45 | 8.65 | 8.9 | V | VDD Low-to-High, MCP73842, MCP73844 | 3 |
| UVLO Stop Threshold | VSTOP | 8.4 | 8.6 | 8.85 | V | VDD High-to-Low, MCP73842, MCP73844 | 3 |
| Regulated Output Voltage | VREG | 8.159 | 8.2 | 8.241 | V | VDD = [VREG(Typ)+1V], IOUT = 10 mA, TA = -5°C to +55°C | 3 |
| Line Regulation | /ΔVBAT/VBAT//ΔVDD | | 0.025 | 0.25 | %/V | VDD = [VREG(Typ)+1V] to 12V, IOUT = 10 mA | 3 |
| Load Regulation | /ΔVBAT//VBAT | | 0.01 | 0.25 | % | IOUT = 10 mA to 150 mA, VDD = [VREG(Typ)+1V] | 3 |
| Supply Ripple Attenuation 100 Hz | PSRR | | -58 | | dB | IOUT = 10 mA, 100 Hz | 3 |
| Supply Ripple Attenuation 1 kHz | PSRR | | -42 | | dB | IOUT = 10 mA, 1 kHz | 3 |
| Supply Ripple Attenuation 10 kHz | PSRR | | -30 | | dB | IOUT = 10 mA, 10 kHz | 3 |
| Output Reverse Leakage Current | IDISCHARGE | | 0.4 | 1 | µA | VDD Floating, VBAT = VREG(Typ) | 3 |
| Fast Charge Current Regulation Threshold | VFCS | 100 | 110 | 120 | mV | VDD, VSENSE, TA = -5°C to +55°C | 3 |
| Precondition Current Regulation Threshold | VPCS | 5 | 10 | 15 | mV | VDD, VSENSE, TA = -5°C to +55°C | 4 |
| Precondition Threshold Voltage | VPTH | 5.4 | 5.6 | 5.8 | V | VBAT Low-to-High, MCP73842-8.2 | 4 |
| Charge Termination Threshold | VTCS | 4 | 7 | 10 | mV | VDD, VSENSE, TA = -5°C to +55°C | 4 |
| Recharge Threshold Voltage | VRTH | -600 | -400 | -200 | mV | VREG offset, VBAT High-to-Low, MCP73842 | 4 |
| Gate Drive Minimum Voltage | VDRVMIN | | | 1 | V | VDD = 4.5V | 4 |
| Gate - Source Clamp Voltage | VGS | -7 | | -4.5 | V | VDD = 12.0V | 4 |
| Thermistor Reference Output Voltage | VTHREF | 2.475 | 2.55 | 2.625 | V | TA = +25°C, VDD = VREG(Typ)+1V, ITHREF = 0 mA | 4 |
| Thermistor Reference Source Current | ITHREF | 200 | | | µA | | 4 |
| Thermistor Reference Line Regulation | ΔVTHREF/VTHREF)//ΔVDD | | 0.1 | 0.25 | %/V | VDD=[VREG(Typ)+1V] to 12V | 4 |
| Thermistor Reference Load Regulation | ΔVTHREF/VTHREF | | 0.01 | 0.1 | % | ITHREF = 0 mA to 0.20 mA | 4 |
| Upper Trip Threshold | VT1 | 1.18 | 1.25 | 1.32 | V | | 4 |
| Lower Trip Threshold | VT2 | 0.59 | 0.62 | 0.66 | V | | 4 |
| Thermistor Input Bias Current | /IBIAS/ | | | 2 | µA | | 4 |
| Status Sink Current | ISINK | 4 | 7 | 12 | mA | | 4 |
| Status Low Output Voltage | VOL | | 200 | 400 | mV | ISINK = 1 mA | 4 |
| Status Input Leakage Current | ILK | | 0.01 | 1 | µA | ISINK = 0 mA, VSTAT1 = 12V | 4 |
| Enable Input High-Voltage Level | VIH | 1.4 | | | V | | 5 |
| Enable Input Low-Voltage Level | VIL | | | 0.8 | V | | 5 |
| Enable Input Leakage Current | ILK | | 0.01 | 1 | µA | VENABLE = 12V | 5 |
| UVLO Start Delay | tSTART | | | 5 | msec | VDD Low-to-High | 5 |
| Transition Time Out of Preconditioning | tDELAY | | | 1 | msec | VBAT< VPTH to VBAT > VPTH | 5 |
| Current Rise Time Out of Preconditioning | tRISE | | | 1 | msec | IOUT Rising to 90% of IREG | 5 |
| Fast Charge Safety Timer Period | tFAST | 1.1 | 1.5 | 1.9 | Hours | CTIMER = 0.1 µF | 5 |
| Preconditioning Charge Safety Timer Period | tPRECON | 45 | 60 | 75 | Minutes | CTIMER = 0.1 µF | 5 |
| Elapsed Time Termination Period | tTERM | 2.2 | 3 | 3.8 | Hours | CTIMER = 0.1 µF | 5 |
| Status Output turn-off | tOFF | | | 200 | µsec | ISINK = 10 mA to 0 mA | 5 |
| Status Output turn-on | tON | | | 200 | µsec | ISINK = 0 mA to 10 mA | 5 |
| Input/Output Voltage | | -0.3 | | | V | All inputs and outputs w.r.t. VSS, max (VDD+0.3)V | 3 |
| Current at DRV Pin | | -4 | | 4 | mA | | 3 |
| Current at STAT1 Pin | | -30 | | 30 | mA | | 3 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage temperature | | -65 | | 150 | °C | | 3 |
| ESD HBM | | | | 2 | kV | Human Body Model (1.5 kΩ in Series with 100 pF) | 3 |
| ESD MM | | | | 200 | V | Machine Model (200 pF, No Series Resistance) | 3 |
| Specified Temperature Range | TA | -40 | | 85 | °C | | 5 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 5 |
| Thermal Resistance, MSOP-10 | θJA | | 113 | | °C/W | 4-Layer JC51-7 Standard Board, Natural Convection | 5 |
| Thermistor Reference Temperature Coefficient | TCTHREF | | 50 | | ppm/°C | | 4 |
| Gate Drive Current Sink | IDRV | | 2 | | mA | Sink, CV Mode | 4 |
## CAD (KiCad official)
- Symbol: `MCP73842-820I`
- Footprint: `Package_SO:MSOP-10_3x3mm_P0.5mm`
- 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files: `mcp73842-820i-etched.step` / `mcp73842-820i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp73842-820i.step` / `mcp73842-820i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp73842-820i-datasheet.pdf) (26 pp, sha256 `da2a0f52e1435a78`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp73842-820i-datasheet.pdf)