main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.2.1 · Ray
viewers mcp73833t-ami-mf: footprint pads join the pin-hover bus with the symbol (11 pads) · Ray
mcp73833t-ami-etched.fit.json mcp73833t-ami: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp73833t-ami-etched.glb mcp73833t-ami: factory component page (tier=mfr) · Ray
mcp73833t-ami-etched.step mcp73833t-ami: factory component page (tier=mfr) · Ray
mcp73833t-ami-hero.glb mcp73833t-ami: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp73833t-ami-hero.overlay.json mcp73833t-ami: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp73833t-ami-mf-hero.glb Publish 0.2.2 · Ray
mcp73833t-ami-mf-hero.overlay.json Publish 0.2.2 · Ray
mcp73833t-ami.glb Publish 0.1.0 · Ray
mcp73833t-ami.kicad_mod Publish 0.2.1 · Ray
mcp73833t-ami.kicad_sym Publish 0.2.1 · Ray
mcp73833t-ami.lbr mcp73833t-ami-mf: renamed from mcp73833t-ami, the part it was built from (MCP73833T-AMI/MF); family listed · Ray
mcp73833t-ami.step Publish 0.1.0 · Ray
package.json Publish 0.2.2 · Ray
page.json Publish 0.2.2 · Ray
README.md mcp73833t-ami-mf: renamed from mcp73833t-ami, the part it was built from (MCP73833T-AMI/MF); family listed · Ray
verification.json Verified: Published by the parts factory: tier mfr, 11 pins · Ray

MCP73833T-AMI/MF

Microchip Tech · Battery Management · DFN-10-EP(3x3)

MCP73833T-AMI from Microchip Tech, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Battery Management Input Supply.
2 VDD power_in Battery Management Input Supply.
3 STAT1 output Charge Status Output (open drain).
4 STAT2 output Charge Status Output (open drain).
5 VSS power_in Battery Management 0V Reference.
6 PROG input Current Regulation Set and Charge Control Enable.
7 PG output Power Good output (MCP73833).
8 THERM input Thermistor input.
9 VBAT power_out Battery Charge Control Output.
10 VBAT power_out Battery Charge Control Output.
11 EP power_in Exposed Thermal Pad (EP); must be connected to VSS.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package DFN-10-EP(3x3)
Category Power Management (PMIC)
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (absolute maximum) VDD 7 V 3
All Inputs and Outputs w.r.t. VSS -0.3 V 3
Storage Temperature -65 150 °C 3
ESD protection, Human Body Model 4 kV HBM (1.5 k in Series with 100 pF) 3
ESD protection, Machine Model 300 V MM (200 pF, No Series Resistance) 3
Specified Temperature Range TA -40 85 °C 5
Operating Temperature Range TA -40 125 °C 5
Supply Voltage, Charging VDD 3.75 6 V Charging 3
Supply Voltage, Charge Complete / Standby VDD 6 V Charge Complete, Standby 3
Supply Current, Charging ISS 2000 3000 µA Charging 3
Supply Current, Charge Complete ISS 150 300 µA Charge Complete 3
Supply Current, Standby ISS 100 300 µA Standby (No Battery or PROG Floating) 3
Supply Current, Shutdown ISS 50 100 µA Shutdown (VDD < VBAT, or VDD < VSTOP) 3
UVLO Start Threshold VSTART 3.4 3.55 3.7 V VDD Low-to-High 3
UVLO Stop Threshold VSTOP 3.3 3.45 3.6 V VDD High-to-Low 3
Regulated Output Voltage (4.20V option) VREG 4.168 4.2 4.232 V VDD = [VREG(Typical) + 1V], IOUT = 10 mA, TA = −5°C to +55°C 3
Line Regulation 0.1 0.3 %/V VDD = [VREG(Typical)+1V] to 6V, IOUT = 10 mA 3
Load Regulation 0.1 0.3 % IOUT = 10 mA to 100 mA, VDD = [VREG(Typical)+1V] 3
Fast Charge Current Regulation (PROG = 10 k) IREG 90 100 110 mA PROG = 10 k, TA = −5°C to +55°C 3
Fast Charge Current Regulation (PROG = 1.0 k) IREG 900 1000 1100 mA PROG = 1.0 k, TA = −5°C to +55°C 3
Precondition Current Ratio (10% option) IPREG / IREG 7.5 10 12.5 % PROG = 1.0 k to 10 k 4
Precondition Voltage Threshold Ratio (71.5% option) VPTH / VREG 69 71.5 75 % 4
Charge Termination Current Ratio (7.5% option) ITERM / IREG 5.6 7.5 9.4 % TA = −5°C to +55°C 4
Output Reverse Leakage Current, PROG floating IDISCHARGE 0.15 2 µA PROG Floating 4
Output Reverse Leakage Current, VDD < VBAT IDISCHARGE 0.25 2 µA VDD < VBAT 4
Output Reverse Leakage Current, VDD < VSTOP IDISCHARGE 0.15 2 µA VDD < VSTOP 4
Output Reverse Leakage Current, Charge Complete IDISCHARGE -5.5 -15 µA Charge Complete 4
Sink Current (STAT1, STAT2, PG) ISINK 15 25 mA 4
Low Output Voltage (STAT1, STAT2, PG) VOL 0.4 1 V ISINK = 4 mA 4
Input Leakage Current (status outputs) ILK 0.01 1 µA High Impedance, 6V on pin 4
Charge Impedance Range RPROG 1 20 kΩ 4
Standby Impedance RPROG 70 200 kΩ Minimum Impedance for Standby 4
Thermistor Current Source ITHERM 47 50 53 µA 2 k < RTHERM < 50 k 4
Upper Trip Threshold VT1 1.2 1.23 1.26 V VTHERM Low-to-High 4
Lower Trip Threshold VT2 0.235 0.25 0.265 V VTHERM High-to-Low 4
THERM Input Sink Current ISINK 3 6 20 µA Stand-by or system test mode 4
Bypass Capacitance (IOUT < 250 mA) CBAT 1 µF IOUT < 250 mA 4
Bypass Capacitance (IOUT > 250 mA) CBAT 4.7 µF IOUT > 250 mA 4
UVLO Start Delay tSTART 5 ms VDD Low-to-High 5
Transition Time Out of Preconditioning tDELAY 1 ms VBATVPTH 5
Current Rise Time Out of Preconditioning tRISE 1 ms IOUT Rising to 90% of IREG 5
Preconditioning Comparator Filter Time tPRECON 0.4 1.3 3.2 ms Average VBAT Rise/Fall 5
Termination Comparator Filter Time tTERM 0.4 1.3 3.2 ms Average IOUT Falling 5
Charge Comparator Filter Time tCHARGE 0.4 1.3 3.2 ms Average VBAT Falling 5
Thermistor Comparator Filter Time tTHERM 0.4 1.3 3.2 ms Average THERM Rise/Fall 5
Elapsed Timer Period (0 hours option) tELAPSED 0 0 0 Hours Timer Disabled 5
Status Output turn-off time tOFF 200 µs ISINK = 1 mA to 0 mA 5
Status Output turn-on time tON 200 µs ISINK = 0 mA to 1 mA 5
Thermal Resistance, DFN-10 3x3 JA 41 °C/W 4-Layer JC51-7 Standard Board, Natural Convection 5

CAD (KiCad official)

  • Symbol: MCP73833T-AMI
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: mcp73833t-ami-etched.step / mcp73833t-ami-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp73833t-ami.step / mcp73833t-ami.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (29 pp, sha256 814b6082bd5076db, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP73833T-AMI/MF. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP73833T-AMI/UN