main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp73213-b6si: viewers · Ray
mcp73213-b6si-etched.glb Publish 0.1.0 · Ray
mcp73213-b6si-etched.step mcp73213-b6si: factory component page (tier=mfr) · Ray
mcp73213-b6si-hero.glb mcp73213-b6si: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp73213-b6si-hero.overlay.json Publish 0.1.0 · Ray
mcp73213-b6si.glb Publish 0.1.0 · Ray
mcp73213-b6si.kicad_mod Publish 0.1.0 · Ray
mcp73213-b6si.kicad_sym Publish 0.1.0 · Ray
mcp73213-b6si.lbr Publish 0.1.0 · Ray
mcp73213-b6si.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MCP73213-B6SI

Microchip Tech · Battery Management ICs · DFN-10(3x3)

MCP73213-B6SI from Microchip Tech, in a DFN-10(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Battery management input supply; recommended [VREG(typ)+0.3V] to 13.0V, bypass to VSS with at least 1 µF, rated 18V absolute maximum.
2 VDD power_in Battery management input supply; recommended [VREG(typ)+0.3V] to 13.0V, bypass to VSS with at least 1 µF, rated 18V absolute maximum.
3 VBAT power_in Battery charge control output connected to the positive battery terminal, bypassed to VSS with at least 1 µF for loop stability.
4 VBAT power_in Battery charge control output connected to the positive battery terminal, bypassed to VSS with at least 1 µF for loop stability.
5 NC unconnected No connection.
6 NC unconnected No connection.
7 STAT output Open-drain charge status output for driving an LED or, with a pull-up resistor, interfacing to a host microcontroller.
8 VSS power_in Battery management 0V reference, connected to the negative terminal of the battery and input supply.
9 VSS power_in Battery management 0V reference, connected to the negative terminal of the battery and input supply.
10 PROG bidirectional Fast charge current is set by a resistor to VSS (130 mA to 1100 mA); a typical 200 kΩ impedance puts the device in standby, so it also serves as charge enable.
11 EP passive Exposed thermal pad, connected to exposed PCB copper area (with vias) for thermal enhancement.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package DFN-10(3x3)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VDD 4 16 V 5
Operating Supply Voltage VDD 4.2 13 V 5
Supply Current, Shutdown ISS 4 5.5 μA Shutdown (VDD ≤ VBAT, 150 mV) 5
Supply Current, Charging ISS 700 1500 μA Charging 5
Supply Current, Standby ISS 50 125 μA Standby (PROG Floating) 5
Supply Current, Charge Complete ISS 50 150 μA Charge Complete; No Battery; VDD < VSTOP 5
Output Reverse Leakage Current, Standby IDISCHARGE 0.5 2 μA Standby (PROG Floating) 5
Output Reverse Leakage Current, Shutdown IDISCHARGE 0.5 2 μA Shutdown (VDD ≤ VBAT or VDD < VSTOP) 5
Output Reverse Leakage Current, Charge Complete IDISCHARGE 10 17 μA Charge Complete; VDD is present 5
UVLO Start Threshold VSTART 4.1 4.15 4.25 V 5
UVLO Stop Threshold VSTOP 4 4.05 4.1 V 5
OVP Start Threshold VOVP 12.8 13 13.2 V 5
Regulated Output Voltage (8.20V option) VREG 8.15 8.2 8.25 V TA= -5°C to +55°C; VDD = [VREG(Typical)+1V]; IOUT = 50 mA 5
Regulated Output Voltage (8.40V option) VREG 8.35 8.4 8.45 V TA= -5°C to +55°C; VDD = [VREG(Typical)+1V]; IOUT = 50 mA 5
Regulated Output Voltage (8.70V option) VREG 8.65 8.7 8.75 V TA= -5°C to +55°C; VDD = [VREG(Typical)+1V]; IOUT = 50 mA 5
Regulated Output Voltage (8.80V option) VREG 8.75 8.8 8.85 V TA= -5°C to +55°C; VDD = [VREG(Typical)+1V]; IOUT = 50 mA 5
Output Voltage Tolerance VRTOL -0.6 0.6 % 5
Line Regulation /ΔVBAT/VBAT//ΔVDD 0.05 0.2 %/V VDD = [VREG(Typical)+1V] to 12V; IOUT = 50 mA 5
Load Regulation /ΔVBAT/VBAT/ 0.05 0.2 % IOUT = 50 mA, 150 mA; VDD = [VREG(Typical)+1V] 5
Fast Charge Current Regulation IREG 130 1100 mA TA = -5°C to +55°C 6
Fast Charge Current Regulation, PROG = 10 kΩ IREG 117 130 143 mA PROG = 10 kΩ 6
Fast Charge Current Regulation, PROG = 1.1 kΩ IREG 900 1000 1100 mA PROG = 1.1 kΩ 6
Precondition Voltage Threshold Ratio (66.5% option) VPTH/VREG 64 66.5 69 % VBAT Low-to-High 6
Precondition Voltage Threshold Ratio (71.5% option) VPTH/VREG 69 71.5 74 % VBAT Low-to-High 6
Charge Termination Current Ratio (5% option) ITERM/IREG 3.7 5 6.3 % PROG = 1 kΩ to 10 kΩ; TA=-5°C to +55°C 6
Charge Termination Current Ratio (7.5% option) ITERM/IREG 5.6 7.5 9.4 % PROG = 1 kΩ to 10 kΩ; TA=-5°C to +55°C 6
Charge Termination Current Ratio (10% option) ITERM/IREG 7.5 10 12.5 % PROG = 1 kΩ to 10 kΩ; TA=-5°C to +55°C 6
Charge Termination Current Ratio (20% option) ITERM/IREG 15 20 25 % PROG = 1 kΩ to 10 kΩ; TA=-5°C to +55°C 6
Recharge Voltage Threshold Ratio VRTH/VREG 93 95 97 % VBAT High-to-Low 6
Status Sink Current ISINK 20 35 mA 6
Status Low Output Voltage VOL 0.2 0.5 V ISINK = 4 mA 6
Status Input Leakage Current ILK 0.001 1 μA High Impedance, VDD on pin 6
Charge Impedance Range RPROG 1 22 kΩ 6
Elapsed Timer Period (4 hr option) tELAPSED 3.6 4 4.4 Hours 7
Elapsed Timer Period (6 hr option) tELAPSED 5.4 6 6.6 Hours 7
Elapsed Timer Period (8 hr option) tELAPSED 7.2 8 8.8 Hours 7
Preconditioning Timer Period tPRECHG 0.4 0.5 0.6 Hours 7
Status Output Turn-Off tOFF 500 μs ISINK = 1 mA to 0 mA (Note 1) 7
Status Output Turn-On tON 500 μs ISINK = 0 mA to 1 mA (Note 1) 7
Specified Temperature Range TA -40 85 °C 7
Operating Temperature Range TJ -40 125 °C 7
Storage Temperature Range TA -65 150 °C 7
PROG Voltage VPROG 6 V 5
All Inputs and Outputs w.r.t. VSS -0.3 V -0.3 to (VDD+0.3)V 5
Storage Temperature -65 150 °C 5
ESD Protection on All Pins, HBM 4 kV HBM 5
ESD Protection on All Pins, MM 300 V MM 5
Thermal Resistance Junction-to-Ambient, DFN-10LD (3x3) θJA 62 °C/W 4-Layer JC51-7 Standard Board, Natural Convection 7
Thermal Resistance Junction-to-Case, DFN-10LD (3x3) θJC 20.5 °C/W 4-Layer JC51-7 Standard Board, Natural Convection 7
Thermal Shutdown Die Temperature TSD 150 °C 7
Thermal Shutdown Hysteresis TSDHYS 10 °C 7
UVLO Hysteresis VHYS 100 mV 5
OVP Hysteresis VOVPHYS 150 mV 5
Pass Transistor ON-Resistance RDSON 350 mΩ VDD = 4.5V, TJ = 105°C (Note 1) 6
BSP Regulation Current ISHORT 25 mA 6
BSP Start Threshold VSHORT 3.4 V 6
Precondition Current Ratio IPREG/IREG 10 % PROG = 1 kΩ to 10 kΩ; TA=-5°C to +55°C 6
Supply Ripple Attenuation PSRR -46 dB IOUT = 20 mA, 10 Hz to 1 kHz 6

CAD (KiCad official)

  • Symbol: MCP73213-B6SI
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10(3x3) (KiCad packages3D, STEP)
  • 3D model files: mcp73213-b6si-etched.step / mcp73213-b6si-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp73213-b6si.step / mcp73213-b6si.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (34 pp, sha256 43950b6737187b37, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF